15a9878269
Geoffreyyoung lgx ( #477 )
...
* add lgx
* add new information
* adjustments
* tyop
* add LGX to top level...
* spider bracket works with trident
* add LGX models
* add LGX model
* tyop
* fix tyop
* add toc, call out Nemgra's work a bit more
* change to proper gear_ratio (thanks to @KiloQubit!)
* resolve conflicts
* fix tyop (again)
* one last tweak
2021-10-09 16:07:48 -04:00
05ba3ce97c
Added PanzerBalls - Squash Feet ( #459 )
...
* Added PanterChain2.4
* Update readme.md
* Update Overview.JPG
* Update readme.md
* ChangePicture
* Update PanzerChain2.4.pdf
* Update PanzerChain2.4.pdf
* XY Bridge angepasst, Extrusion Anchor auch
* Removed 2.4 Beta Files in Legacy Mods
* Update x_anchor_mount_direct_drive2_cover_x1.stl
Changed the height of the shield to prevent collisions
* Revert "Update x_anchor_mount_direct_drive2_cover_x1.stl"
This reverts commit 3401e99bf2
2021-10-09 12:45:27 -04:00
440aa4873e
Richardjm/back plate ( #482 )
...
* Rough and ready back plate design
* Fix incorrect image markdown
* Add newline
* Words, use the right words
* Improved CAD, many depths, better instructions
* Add blanking plate to readme
* Missing newline
* Fix PR - 4mm version and typos
Must have been tired
2021-10-08 13:34:17 -04:00
d6912fa1b1
"Bed Support Extrusions" Alignment Tools for Voron 2.4 and Trident ( #478 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2021-10-07 20:42:41 -04:00
878b5b819d
Add MGN12 Euclid mount, based on Trident carriage ( #408 )
...
* Add MGN12 Euclid mount, based on Trident carriage
* Add Trident check mark, and update readme to link to docks
* I always mess up markdown links like that
2021-10-07 19:47:55 -04:00
bf8c9a28ec
PR nova printhead - beaugalbraith ( #462 )
...
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
2021-10-05 21:29:40 -04:00
3baa900762
Removing mods ( #476 )
...
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* Updated based on PR comments
* Updated STL so it doesnt hit the bed
* Utility Belt
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Removing mods
* Removed links
2021-10-05 13:28:59 -04:00
a0a7dcc466
V2.4 Exhaust Housing for 120mm Fan and 4in Duct ( #475 )
...
* First commit so I can see the README
* Finished instructions and added STL files
* Update README.md
* Update README.md
* Update README.md
Images were stretch funny on mobile, remove the height=<> argument to try to fix that
* Fix overhang greater than 45 degrees
* Found a few more overhangs that needed fixing
2021-10-03 21:01:52 -04:00
3961a1da2c
Richardjm/adxl chain ( #460 )
...
* Work in progress (so no index link) for ADXL mount
* Fix readme
* Fix readme some more
* Untested prints
Clearance for electronics cover
Board closer to motor giving more wire clearance
Cleaned up CAD
Suggested JST XH
* Update CAD and fix readme
* Reorientation and re-exporting
* Should stop fiddling - added extra support bracket for chain
* Integrating with main CAD noticed there wasn't space for cover
* Update CAD image with latest design
* Add hardware to cad
* Add clearance image and design process
* Adafruit variant - untested
* Add adafruit mentions
* Add to readme for PR
* Finish of ADXL readme
* Remove WIP from ADXL readme
* Fix orientation which largely seems to be a matter of chance in Fusion 360
* PR Changes
Reduced overhang, by also removing attempt to use M3 threaded inserts for a 2.5mm through hole in the Adafruit board
* Fix readme some more
2021-10-03 08:20:20 -04:00
6cdf7a55a7
2x Mods for V2 Sept2021 ( #456 )
...
* Create Readme Plugpanel 3x Keystone
* create .gitkeep
* uploading pics
* Rename printer_mods/khay/micro_backplate/V2_3x_Keystone_Plugpanel/README.md to printer_mods/khay/V2_3x_Keystone_Plugpanel/README.md
* Rename printer_mods/khay/micro_backplate/V2_3x_Keystone_Plugpanel/Img/.gitkeep to printer_mods/khay/V2_3x_Keystone_Plugpanel/Img/.gitkeep
* Delete DSC_3253.JPG
* Delete Plug_Panel_CAD.png
* uploading pics
* Adding STL 3x Keystone for V2
* Creating Readme for 4020 Electronics Fan Mod
* Adding STL 4020 Electronics Fan Skirt
* Create .gitkeep
* Adding Pics for V2-200 4020 Electronics Fan Mod
* adding V2 Mods from Khay
* added Trident checkmarks
* Reupload STL - Correction of Filename
* Delete Plug Panel.stl
* Updating link to relative
2021-10-02 19:17:42 -04:00
c4e1df511e
Switchwire feed slot with pass-through ( #455 )
...
* Switchwire feed slot with passthrough
* Updated feed slot
* Fixed stl location, added cad
* Updated README, updated fillet to chamfer, renamed new files without spaces
2021-10-02 16:29:03 -04:00
349f04c6c0
Remove GalileoADXL, incompatible with newer Galileo ( #472 )
...
* Delete printer_mods/leandromarceddu/GalileoADXL directory
Does not work anymore
* Update README.md
Removed GalileoADXL
2021-10-02 13:55:05 -04:00
4854bd9ac1
Add LRS-100 DIN bracket ( #471 )
2021-10-02 11:12:26 -04:00
7c4bc3a04f
Orbiter clockwork adaptor mod ( #441 )
...
* Created Orbiter-Clockwork Folder
* Added mod description for the Orbiter clockwork.
* Updated Requested Changes
Updated Links and Compatibility check.
* Update README.md
* Updated BOM
* Updated spelling error.
* Updated Step file.
* Updated File name and STL
2021-09-30 20:38:30 -04:00
0b64858059
Richardjm/led mounts ( #448 )
...
* LED mounting with integrated cable runs that go behind the Z-idlers.
* Need to change case of images directory
* Change case of Images directory
* Fix markdown
* Fix alphabetical ordering
2021-09-26 08:13:23 -04:00
06b6cb528b
Cricut .SVG Files for Voron Design Logos ( #444 )
...
* Initial Commit
* Update README file
* Update
* Add Voron 0.1 Logo
* Add Voron 2.4 Logos
* Added Voron Design Plain Logo
* Added Logo for Voron SwitchWire
* Added My Own Logo
* Update Printer_mods README.md
* Update README.md
* Update
* Added Voron 2.4 1_Color_without_Logo_Outline
* Added Designs without the LOGO outline
* Update README files
* Update README
* Update README.md file
* Update README files
* Update README file
* Update README files
* Update README files
2021-09-25 08:55:41 -04:00
5a21a99492
LGX Mount for V0.1 ( #407 )
...
* Create README.md
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete LGX_A_Drive_Frame_Lower_x1.stl
* Delete LGX_A_Drive_Frame_Upper_x1.stl
* Delete LGX_B_Drive_Frame_Lower_x1.stl
* Delete LGX_B_Drive_Frame_Upper_x1.stl
* Delete LGX_Cowling_V0.1.stl
* Delete LGX_X_Endstop_Bumper.stl
* Delete LGX_X_carriage_back_plate.stl
* Delete LGX_X_carriage_top.stl
* Delete LGX_Y_Endstop_Bumper.stl
* Delete LGX_Z&Y_Endstop_Mount_x1.stl
* Delete LGX_strain_relive.stl
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Rename printer_mods/MikesMods/7x7 Drag chain Ends/README.md to printer_mods/MikesMods/7x7_Drag_chain_Ends/README.md
Spaces removed from dir name
* Delete printer_mods/MikesMods/7x7_Drag_chain_Ends directory
* Delete printer_mods/MikesMods/LGX mount for V0.1 with 2nd X rail directory
* Delete printer_mods/MikesMods/7x7 Drag chain Ends directory
* Add files via upload
* Update README.md
* Delete README.md
* Update README.md
* Update README.md
* Update README.md
* Delete LGX_strain_relive.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete LGX_Z&Y_Endstop_Mount_x1.stl
* Added Y endstop mount
* Update README.md
* Add files via upload
* Update README.md
* Delete LGX_Y_Endstop_Mount_x1.stl
* print orientation fixed
* mod added to printer_mods README.md in alphabetical order
* Fix README listing.
* errors are fixed
* Fix STL errors.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-23 17:49:11 -04:00
eb88b1e834
adxl345_skirt_keystone mod ( #440 )
...
* Create README.md
ADXL345 skirt keystone with 2 and 4pin microfit 3.0 connectors. I used what I had laying around.
It's based on alchemyEngine's iteration of the g-code buttons. You can also see how to use it there.
https://github.com/alchemyEngine/EnragedRabbitProject/tree/main/usermods/Skirt-Microfit-Inserts
* Add files via upload
* Create adxl345_skirt_keystone
* Fix skirt keystone
* Update README.md
* Update skirt.keystone.adxl345.jpg
* Update README.md
* Split parts
Update stl's
* Update README.md
Fixed typo's
2021-09-22 19:37:24 -04:00
798b94c6c8
Newer, better Wago mount ( #431 )
...
* Initial Mod upload
* Updated main readme
* Revert "Updated main readme"
This reverts commit 46bc0c2cea
2021-09-21 20:25:16 -04:00
11a81f91a5
Voron Switchwire_Y_Belt_Tensioner ( #437 )
...
* Create Switchwire Y Belt Tensioner
This mod for Switchwires Y axis Belt tension without cut pannels
Fasteners
2x M3x8mm SHCS2x M5x10mm SHCS1x M5x10mm BHCS1x M5x16 up to 20mm for tensioner2x M5 T-Nut (For 3030)1x M5 T-Nut (For 2020)2x M3 Threaded Insert
Use M5 Allen key for tension your beltYou can use brim while printing "Body" part
Have a good prints (:
Photos might be differences from STL s because of differences with tested parts, latest tested parts are uploaded and ready for your download
* Delete Switchwire Y Belt Tensioner
* Switchwire Y Belt Tensioner
* Update Readme
* Create SECURITY.md
* Update Readme
* Update and rename Readme to Readme.md
* Delete SECURITY.md
* Update Readme.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* SW_Tensioner_body_V1.STL Upgraded
* Delete SW_Tensioner_Body.stl
* Delete SW_Tensioner_body_V1.stl
* Add files via upload
* Delete SW_Tensioner_Bearing Block.stl
* Add files via upload
* Delete SW Y Belt Tensioner.stp
* Add files via upload
* Update Readme.md
* Update Readme.md
* Rename printer_mods/Mckurt/Switchwire Y Belt Tensioner/Readme.md to printer_mods/Mckurt/Switchwire_Y_Belt_TensionerReadme.md
* Add files via upload
* Delete Switchwire_Y_Belt_TensionerReadme.md
* Delete Readme.md
* Create Readme.md
* Delete SW_Tensioner_Bearing_Block.stl
* Add files via upload
* Rename printer_mods/Mckurt/Switchwire Y Belt Tensioner/Readme.md to printer_mods/Mckurt/Switchwire_Y_Belt_TensionerReadme.md
* Create Readme.md
* Delete Switchwire_Y_Belt_TensionerReadme.md
* Delete Readme.md
* Create Readme.md
* Delete mod.png
* Delete asembly.png
* Delete 7.jpg
* Delete 6.jpg
* Delete 1.jpg
* Delete 5.jpg
* Delete 4.jpg
* Delete 3.jpg
* Delete 2.jpg
* Delete SW_Tensioner_Bearing_Block.stl
* Delete SW_Tensioner_Body.stl
* Delete SW_Tensioner_Cap.stl
* Delete SW_Y_Belt_Tensioner.stp
* Add files via upload
* Delete asembly (1).png
* Delete mod (1).png
* Add files via upload
* Update Readme.md
* Add files via upload
* Delete SW_Tensioner_Bearing_Block.stl
* Add files via upload
* Add files via upload
* Add files via upload
* fix markdown list
* Update README.md
* Use spaces in visible link name.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-21 09:11:11 -04:00
e2628c7d96
Schurter inlet for Trident + README fixes.
2021-09-16 14:02:31 +02:00
01c870e74e
Richardjm/picam corner ( #424 )
...
* Working picam mount with the best field of vision
* A little documentation
* Probably won't work on VSW, but maybe Trident
* Reduce image size and make jpg
* Fix typo
* Make link relative
2021-09-14 10:00:25 -04:00
035bba7d57
Huvud Chain Mount ( #425 )
...
* Added Huvud chain mount
* Updated STL to included built-in support
* Edited pictures for clarity
* Updated README
2021-09-13 19:08:29 -04:00
a935163062
Add LED Light Clip to VoronUsers ( #443 )
...
* Add CAD Files
* Update README.md
* Create Readme.md
* Update Readme.md
* Update Naming
2021-09-13 07:49:48 -04:00
a3a9e0494c
V0.1 Block Style Handle ( #384 )
...
* Create Derpimus
* Delete Derpimus
* Create Derpimus
* Delete Derpimus
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Update README.md
* Delete block handlev0.1.stl
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Delete 20210711_204143.jpg
* Delete 20210711_203746.jpg
* Update README.md
* Delete block handlev0.1.stl
* Add files via upload
* Create images
* Delete images
* Add files via upload
* Update README.md
* Delete block_handlev0.1.stl
* Add files via upload
2021-09-12 20:51:22 -04:00
fe00af8e83
Tophat Hinge for V0 ( #391 )
...
* Create readme.md
TophatHinge for V0
* Add files via upload
* STL files updated to the correct orientation
* Updated readme
* Updated Readme
* Delete Lower_Corner_adapter_2_and_4_Clip_x2.stl
* No overhang and multiple thicknesses
* Delete Hinge_panel_left.stl
* Delete Hinge_panel_right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Hinge_panel_left_2.5mm.stl
* Delete Hinge_panel_left_2mm.stl
* Delete Hinge_panel_left_3mm.stl
* Delete Hinge_panel_right_2.5mm.stl
* Delete Hinge_panel_right_2mm.stl
* Delete Hinge_panel_right_3mm.stl
* Overhang corrected + Multi-thickness
* STEPfiles
2021-09-12 19:36:40 -04:00
c066d9e3c8
Filament Runout Sensor ( #428 )
...
* Create README.md
* Create README.md
* Add files via upload
* Delete README.md
* Create readme.md
* Add files via upload
* Delete readme.md
* Add left and right handed housings
* Create readme.md
* Add files via upload
* Delete readme.md
* Add files via upload
* Update README.md
* Create filament_runout.cfg
* Delete Switch_Cross_Section .png
* Fix file name
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-12 11:50:24 -04:00
05d3f6a36e
Add midspan clips to Magnetic_Panels mod ( #427 )
...
* Add Midspan Clips
* Delete Magnetic Panel Midspan Clips v1.f3d
* Change CAD file name
* Create readme.md
* Add files via upload
* Delete readme.md
* Add midspan STLs
* Update README.md
* Update README.md
* Update STL
* Delete Mid_Cap.stl
* Delete Mid_Mount.stl
* Update CAD
2021-09-12 11:04:43 -04:00
ff562ac11c
Parametric Spool Holder ( #422 )
...
* Parametric Spool Holder
* Fix review comments
2021-09-07 20:24:47 -04:00
e0ab0b4fa2
Bed fans, single MGN9H carriage, 15x15 drag chain end updates ( #416 )
...
* Bed fans initial commit
* Fix readme formatting
* Fix formatting
* fix formatting
* fix formatting
* fix stl orientation
* initial commit for single mgn9 carriage
* modify readme
* reorganize
* reorganize
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* max_power warning
* update readme
* update readme
* update readme
* rename MGN9 to MGN9H
* reorganize
* rename
* fix image
* remove cycle_time
* increase M3 tolerance
* add photo
* add image
* add to mod table
* add photo
* add photo
* Bed fans initial commit
* Fix readme formatting
* Fix formatting
* fix formatting
* fix formatting
* fix stl orientation
* initial commit for single mgn9 carriage
* modify readme
* reorganize
* reorganize
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* max_power warning
* update readme
* update readme
* update readme
* rename MGN9 to MGN9H
* reorganize
* rename
* fix image
* remove cycle_time
* increase M3 tolerance
* add photo
* add image
* add to mod table
* add photo
* add photo
* fix bug causing bed fans to not turn off with bed
* set thresholds to integer values
* Support TURN_OFF_HEATERS
* Modify comments
* Modify fast speed
* Update readme
* Update README.md
* Update readme
* update readme
* update readme
* update readme
* update readme
* update readme / photos
* add photo
* formatting
* Update short Z joints CAD to remove the rest of v2.4 assembly
* Reorder readme
* update readme
2021-09-04 18:16:27 -04:00
59c3ede646
Voron V0 LCD Touchscreen Skirt ( #323 )
...
An extended 40mm skirt + touchscreen for the Voron V0.
Adds a 3.2" Adafruit PiTFT Plus resistive touchscreen, mounted to the
front skirt area. Faces up at a ~30 degree angle.
Optional laser-cut bottom electronics panel. This panel could also be 3D
printed on larger printers with a ~230mm x ~230 mm bed area.
2021-09-04 16:31:17 -04:00
418481ea07
V0.1 Movable Pulley Z Drive Mod ( #413 )
...
* Initial commit
* Update README.md
* Adjust the depth of M3 screw holes for bed_mount
* Add explanation about the 80T gear stl
* Adjust the markdown format
* Remove overhangs
* Add a hidden M5 washer to BOM
* Fix typo
2021-08-31 20:02:53 -04:00
2804e6f86c
Magnetic Panels ( #405 )
...
* Create README.md
* Create README.md
* Add files via upload
* Delete README.md
* Create README.md
* Delete README.md
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Delete Cap Assembly.png
* Add files via upload
* Update README.md
* Update README.md
* Delete Magnetic_Cap_6mm.stl
* Add files via upload
* Update README.md
* Rename printer_mods/bobbleheed/V2.4_Magnetic_Panels/README.md to printer_mods/bobbleheed/Magnetic_Panels/README.md
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete README.md
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Delete printer_mods/bobbleheed/V2.4_Magnetic_Panels directory
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete Magnetic Panel Corner Clips.f3d
* Delete Magnetic_Panel_Corner Clips_6mm.f3d
* Create readme.md
* Add files via upload
* Delete readme.md
* Delete Magnetic_Cap_6mm.stl
* Add files via upload
* Correct STL orientation
* Correct Orientation of Cap
* Correct File Orientation
2021-08-29 19:33:23 -04:00
e2bd7188ba
added SW Fan Mount Mode ( #400 )
...
* added SW Fan Mount Mode
* fixed readme
2021-08-29 16:58:43 -04:00
60b3801976
BMO afterburner toolheads ( #398 )
2021-08-29 14:06:21 -04:00
4593c23472
Added side entry exhaust housing ( #412 )
...
* Added side entry exhaust housing
* Fix filename
2021-08-23 11:37:53 -04:00
620a669340
Vertical PSU Mount ( #375 )
...
* Vertical PSU Mount
* updated readme
2021-08-22 20:11:21 -04:00
bc32449724
LoudOwl aka Stabby a dual 5015 mod directly swappable on Afterburner ( #395 )
...
* Create README.md
* Update README.md
* Delete printer_mods/Baltojikale directory
* Create README.md
* Add files via upload
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
* Add files via upload
removed spaces in names
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/CAD directory
bad naming
* Add files via upload
corrected naming
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory
incorrect naming
* Add files via upload
corrected naming
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
wrong orientation
* Add files via upload
fixed stl orientation
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Add files via upload
* Update README.md
text change houses>>> house
* Rename printer_mods/Baltojikale/LoudOwl aka Stabby/README.md to printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md
* Rename printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md to printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md
* Rename printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md to printer_mods/Baltojikale/LoudOwl aka Stabby/README.md
* Fixed name
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory
* Reuploading to LoudOwl_aka_Stabby
* Create Visual
* Delete Visual
* Add files via upload
* Add files via upload
* Add files via upload
* Delete printer_mods/Baltojikale/LoudOwl_aka_Stabby/STL/Old_need_supports directory
* Add files via upload
* Update README.md
* Delete Front_piece_supports.stl
* Delete Logo_piece_w_support.stl
* Add files via upload
* Delete Front_piece_w_supports.stl
* Add files via upload
* Delete Logo_piece_w_support.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
fixing English in readme
* Delete Back.stl
* Add files via upload
* Add files via upload
small improvements for printability
* Delete LoudOwl_V14.f3d
* Delete LoudOwl_V14.step
* Delete LoudOwl v15.f3d
* Delete LoudOwl v15.step
* Add files via upload
updated geometries
* Delete Back.stl
* Add files via upload
updated geometry
* Delete comparison.jpg
* Add files via upload
2021-08-22 16:34:10 -04:00
2dfacf062f
Bed Wiring Grommet for Voron 2.4 ( #397 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Update Readme.md
Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Update README.md
* Add files via upload
* Update readme.md
* Create readme.md
* Add files via upload
* Delete pic1.JPG
* Delete pic2.JPG
* Delete pic3.JPG
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
* Add files via upload
* Create readme.md
* Create readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Delete readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update README.md
* Delete Microswitch_PCB_Pod.step
* Delete Microswitch_PCB_Pod.stl
2021-08-13 08:48:01 -04:00
41734ec93e
add 4.3 inch display mount for switchwire ( #392 )
...
* add 4.3 inch display mount for switchwire
* update readme
Co-authored-by: Gi7mo! <github@gi7mo.org>
2021-08-08 09:49:25 -04:00
4487d37362
Magnetic grill mount ( #393 )
...
* Initial commit
* Removed spaces in filenames
2021-08-07 10:51:11 -04:00
de87b598bf
Voron 2.4 USB Camera Mount ( #389 )
...
* Create ReadMe.md
* Add files via upload
* Update ReadMe.md
* Update ReadMe.md
* Update README.md
* Update README.md
* Create ReadMe.md
* Rename printer_mods/Takuya/ReadMe.md to printer_mods/Takuya/USBCameraMount/ReadMe.md
* Delete VoronCamMount.zip
* Add files via upload
* Delete printer_mods/Takuya/CameraMount directory
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update ReadMe.md
* Update ReadMe.md
* Create ReadMe.md
* Update ReadMe.md
* Update ReadMe.md
* Add files via upload
* Delete VoronCamMount.zip
* Update ReadMe.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update ReadMe.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-08-04 20:59:33 -04:00
8f40b51112
Extrusion backers to counteract bimetallic frame bowing ( #390 )
...
* transferred from other repo
* fixed link
* added panzerchain compatible hole spacing
2021-08-04 19:57:45 -04:00
5f9287ce1c
Adafruit NeoPixel mounts for V0 ( #388 )
...
* Initial commit
* Address comments in PR #388
2021-08-04 08:21:40 -04:00
1e1bdf058e
Mantis Dual 5015 by Long ( #387 )
...
* Delete Duct_v1.033.2_Left.stl
* Delete Duct_v1.033.2_Right.stl
* Delete Mount_Dragon_v1.036.stl
* Delete Readme_v1.02.pdf
* Add files via upload
* Add files via upload
* Update Macros_and_Config.txt
* Delete Readme_v1.04.pdf
* Add files via upload
* Delete Mantis Dual 5015 v1.037 v10.step
* Add files via upload
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
* Add files via upload
* Update Macros_and_Config.txt
* Update README.md
* Update README.md
* Add files via upload
* Delete readme.md
* Delete Carriage_v1.036.stl
* Delete Chain_Anchor_v3.1.stl
* Delete Magprobe_Dock_Arm_v1.0.stl
* Delete Magprobe_Dock_Mount_v1.0.stl
* Delete Magprobe_Gantry_Dock_Arm_v0.21.stl
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Dock_Mount_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
* Delete Magprobe_Longs_v0.31.stl
* Delete Mantis_Dual_5015_v1.037.step
* Delete Readme_v1.04.pdf
* Delete Duct_v1.037_Left.stl
* Delete Duct_v1.037_Right.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete Magprobe_Gantry_Dock_Arm_v1.5_Single_magnet_Longer.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update Macros_and_Config.txt
* Update README.md
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Update README.md
* Update README.md
* Add files via upload
2021-08-03 19:39:03 -04:00
e1aba7145d
ADXL345 Chain Anchor mod ( #386 )
...
* add ADXL345 Chain Anchor mod
* Spelling
* fix insert amount
* remove spaces from filenames
fix some markdown warnings
* didnt actually test it on 1.8 and SW
* Adding the change requests from @KiloQubit
* Rotated stl to a printable orientation
* Readme file formatted
* typo in Markdown file
Co-authored-by: Padok <padok@disroot.org>
Co-authored-by: louis.frank <lfrank@dpz.eu>
2021-07-28 14:45:13 -04:00
723129277d
V1 3z mod ( #371 )
...
* Initial import
* Added instructions, dxf and config files
* Update README.md
* Update Bottom_Panel_Cutout_Cover_2_Color.stl
* Added photos and updated docs
* Update README.md
* Added slots for motor mounts to allow for more adjustment
* File cleanup
* Added note about stepper position
* Update README.md
* Update README.md
* Changed motor mount holes to use bridge cutter
2021-07-27 07:54:24 -04:00
cb8036fd67
BTT Octopus DIN vertical mount ( #385 )
...
* feat: BTT octopus DIN virtical mount
* fix: rename folder
* fix: remove space
* fix: spelling
* fix: stl oriantation, broken link, docs.
* fix: read me doc
* fix: read me
2021-07-20 19:40:20 -04:00
751291c769
added my e3 to sw mod ( #362 )
...
* Create readme
* added my mods
idk if im doing this right
* Create ender 3 to sw conversion
* Delete ender 3 to sw conversion
* gave mod name
* renamed folder
* Update README.md
* Update README.md
typo
* Update README.md
* Update README.md
* Update README.md
* converted f3d to step
* Update README.md
* Update README.md
* Update README.md
* stls updated
* renamed stls
* Update README.md
* updated names
* updated names
* Update README.md
* updated stuff to fulfil kiloqubit's request
* rename to have no spaces
* updated names
* Update README.md
* Update front_display.stl
* name update
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-07-18 16:12:18 -04:00
256ff119a7
V0.1 LED Tophat Mod ( #378 )
...
* Create Shteeeeeve
* V0.1 LED Tophat Mod
* Update README.md
* Moving to Folder / Readme Updates
* Updates
* Updates
* V0.1 LED Tophat
* V0.1 LED Tophat
* V0.1 LED Tophat
* Update README.md
* V0.1 LED Tophat
* Update README.md
2021-07-17 13:07:34 -04:00
ff290f56f2
V0.1 skirt mod for SSD1306 OLED ( #380 )
...
* Add V0.1 skirt OLED mod
* Add V0.1 OLED skirt mod to mod list
* User nicer photo
* Remove redundant licensing statement
2021-07-12 19:38:39 -04:00
a425971f29
"Other" V2 Idlers Mod ( #369 )
...
* Create README.md
* Update README.md
* Add files via upload
* Create README.md
* Delete README.md
* Delete Other_Idler_V2.step
* Delete Other_Idler_V2.f3d
* Delete Front_Idler_Bottomx2.stl
* Delete Front_Idler_Topx2.stl
* Delete [a]_Idler_Carrierx2.stl
* Add files via upload
* Add files via upload
* Update README.md
* Delete printer_mods/Phalanx directory
* Create Other-V2-Idlers
* Delete printer_mods/Phalanx directory
* Create README.md
* Update README.md
* Update README.md
* Initial File Upload
* Added Other Idlers to readme.md - alphabetical
* Fixed Link
* Added Images File
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Changed BOM to list format
* Update README.md
Added note for fully-threaded screw
* Update README.md
* Add files via upload
* Delete 20210619_102801.jpg
* Delete 20210619_203112.jpg
* Delete 20210619_204308.jpg
* Delete 20210624_092643.jpg
* Delete 20210709_210049.jpg
* Update README.md
* Update README.md
Updated image links
* Delete Heat_Set_Note.jpg
* Delete Idler comparison.jpg
* Add files via upload
Updated image files
* Update README.md
updated file type in links
* Update README.md
Corrected Case on Images folder
* Update README.md
Added standards and settings
* Add files via upload
Added standards and settings snips
* Update README.md
* Update README.md
2021-07-12 15:55:55 -04:00
67ccf3287b
Voron_V0.1_Parts_Logo ( #383 )
...
* Create README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
2021-07-11 15:48:52 -04:00
259cc6c5ee
add Dual Rail Installation Guide ( #379 )
2021-07-11 13:16:16 -04:00
732a9e28c7
Added Articulating Raspberry Pi 7" Display Mount ( #376 )
...
* Added Articulating Raspberry Pi 7" Display Mount
* Fixed line endings in README.md
* Fixed typo in README.md
* One more time
* Cleaned up Tinker CAD model artifacts in Fusion 360
2021-07-06 08:05:32 -04:00
07699fcc3c
Minimalistic Backplate Mod for V0.0 and V0.1 ( #377 )
...
* Create README.md
* micro_backplate_V0
STLs and Pictures
* Add files via upload
* adding mod for khay
* Update README.md
* Delete micro_backpanel.zip
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Create .gitkeep
* Delete CAD_pic.jpg
* Delete DSC_2957.JPG
* Delete DSC_2960.JPG
* Delete Slicer_pic.png
* Add files via upload
* Add files via upload
* Update README.md
* Delete DSC_2959.jpg
* Update README.md
* Update README.md
2021-07-05 19:26:22 -04:00
88f6ea1fe5
BTT Octopus DIN Rail bracket ( #374 )
...
* octopus_din_bracket_draft
* btt_octopus_din_rail_bracket
* octopus_din_rail_bracket
* octopus_din_rail_bracket
* octopus_din_rail_bracket
* octopus_din_rail_bracket
* octopus_din_rail_bracket
* octopus_din_rail_bracket
* Update README.md
remove "!"
* Update README.md
correction "!"
2021-07-03 22:02:36 -04:00
304d3e820e
Magnetic top panel ( #341 )
...
* Create add
* Create readme.md
* Delete add
* Create stt
* Add files via upload
* Delete stt
* Create O
* Add files via upload
* Delete O
* Update readme.md
* Rename printer_mods/Printopal/Magnetic top panel/readme.md to printer_mods/Printopal/Magnetic_top_panel/readme.md
* Update README.md
* Update README.md
* Create OB
* Add files via upload
* Create Check
* Add files via upload
* Delete printer_mods/Printopal/Magnetic top panel directory
* Update README.md
* Update README.md
* Delete 250_top_skirt_220.obj
* Delete printer_mods/Printopal/Magnetic_top_panel/OBJ directory
* Create O
* Add files via upload
* Delete O
* Add files via upload
* Delete printer_mods/Printopal/Magnetic_top_panel/OBJ_STL directory
* Create STL
* Add files via upload
* Delete STL
* Delete printer_mods/Printopal/Magnetic_top_panel/STEP directory
* Create STEP
* Add files via upload
* Delete STEP
* Update readme.md
* Create img
* Add files via upload
* Delete img
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Magnetic_Top_Panel.mp4
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Magnetic_Top_Panel.mp4
* Update readme.md
* Update readme.md
* Update readme.md
2021-07-03 17:17:17 -04:00
d1f61b7d90
Alternate power inlet housing for V0 (Astrodyne 082S or 082SM) ( #366 )
...
* Initial commit of all files
* Astrodyne 082S IEC 320 C14 Power Inlet Housing
* Astrodyne 082S IEC320/C14 Inlet Housing
* Astrodyne inlet: fix entry in printer_mods table
2021-06-29 15:37:08 -04:00
a91f779227
Added V0.1 Belted Z and panel mounting parts for 2.5/3mm panels ( #349 )
...
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
2021-06-28 14:21:49 -04:00
3e91e4f1cb
Microswitch based inductive probe replacement (Klicky Probe) ( #351 )
...
* Create README.md
* initial sincronization
* preparing for PR
moved the files to the right directory
removed space in filenames
added the mod to the respective table
* Update README.md
added better and more recent photos
* Update README.md
corrected image paths
* Update README.md
added link to original repository
* requested corrections
removed some spaces from files
corrected some spelling mistakes
corrected the readme links
updated the AB mount for printabillity
* corrected robust AB mount
updated robust AB mount from oc_geek on usermods
* more corrections
updated zipfile with up to date files
corrected a spelling mistake
2021-06-28 14:11:55 -04:00
ec8c3c8ad1
add spider_bracket.stl ( #361 )
...
* add spider_bracket.stl
* add top-level info
* update compatibility, per @KiloQubit
https://github.com/VoronDesign/VoronUsers/pull/361#discussion_r659356099
* fix broken link
2021-06-28 09:40:44 -04:00
aadd74f73c
TFT Display for Switchwire + Afterburner mount for Input shaper (also works for Y on SW) ( #363 )
...
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* Updated based on PR comments
2021-06-27 16:20:36 -04:00
633d9eb494
Hartk voron users mgn9 c v0 ( #353 )
...
* added V0 MGN9C mod for the X Axis
* Update Readme.md
* updated image
* Update Readme.md
2021-06-26 14:30:52 -04:00
27b045c6c4
Added a SSR strap for Voron V0's ( #352 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Update Readme.md
Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Update README.md
* Add files via upload
* Update readme.md
* Create readme.md
* Add files via upload
* Delete pic1.JPG
* Delete pic2.JPG
* Delete pic3.JPG
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
2021-06-20 17:12:08 -04:00
b772370187
Voron V0 Mean Well Power Supply Bracket & SSR Mount ( #350 )
...
* Create DaGlo
Duet 2 Wifi bracket for Voron V0.1 with and without Raspberry support
* Delete DaGlo
* Voron V0.1 - Duet 2 Wifi bracket
with and without raspberry support
* stl files
* Delete test
* Duet 2 Wifi mounting bracket for the Voron V0.1
* Update README.md
Inserted Folder DaGlo with Voron V0.1 Duet 2 WiFi mounting bracket with/without RPi 4 support
* Delete Duet2Wifi_Mounting_Bracket.stl
* Fixed Path
* Delete Duet2Wifi_Mounting_Bracket w pi.stl
* Delete README.md
* Add files via upload
* Delete Duet2Wifi_Mounting_Bracket w pi.stl
* Add files via upload
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Create README.md
* Add files via upload
* Delete Voron_V0_SSR_Mount v5_Back.png
* Delete Voron_V0_SSR_Mount v5_Front.png
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
2021-06-20 08:45:43 -04:00
73351c75c2
Ender 3 Pro to Switchwire MOD ( #232 )
...
* Ender 3 Pro to Switchwire
This is a mod to convert an Ender 3 Pro to a Switchwire
* Update README.md
Added a row to include the Ender 3 Pro to Switchwire Mod
* Adjusted STL files to default to the proper orientation for printing
Adjusted STL files to default to the proper orientation for printing in Super Slicer.
* Updated the CAD files
Updated the CAD files and included a Fusion 360 archive file
* Update README.md
fixed some typos
* Added additional STL files
Added in the original Switchwire files to avoid confusion and provide a complete set of STL files. Also updated the README.md to clarify this change.
* Update README.md
Added more information about the STL files required.
* Update README.md
Cleaned up formating in the STL list
* Remove duplicate files
Remove duplicate files in the STL folder
* Update CAD files
Update the CAD files to show the power supply hander and lengthen screws on the XZ blocks
* Fixed CAD to show from Y tensioner assembly
The outer mount was not visible, turned on. Also set the opacity to 100% on the slider.
* Added a BOM and updated the README.md
* CAD fixes
Made the Z chain visible.
* Deleted the prior CAD files
* Added printer.cfg files
Added printer.cfg files from users. Also, removed unneeded duplicate files
* Update README.md
Updated README.md to resolve conflicts
* Update README.md
* Updates per PR review
Updates per PR review
* Printability updates
Updated the design eliminate excessive overhang.
* Update STLs and CAD
Updated several STL files for improved printability and uploaded the latest CAD file.
* Update [a]_rpi3_shelf.stl
Fixed the print orientation
* Corrections per PR review
Fixed README.md typos, eliminated several STLs already in the Voron repo, eliminated the cfg file in favor of the stock Switchwire one, fixed several printability issue.
* Updated CAD files
Updated CAD files
* Fix print orientation
* Updates per PR review
Fixed typos in README.md and removed spaces from CAD file names
* Fix typo
* Fixed links for images
Co-authored-by: excessnet <37947369+excessnet@users.noreply.github.com>
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-06-18 21:41:23 -04:00
03990621b7
Lower deck panel support clips ( #348 )
...
* Updated readme with deck support clips info
* Added deck support clips
* Added dummy folder for mods
* Added adjustable lower mount and also included step files
* Added readme file and photos.
* Revised mounting hole to make more printable.
* repaired image links in readme.md
2021-06-18 10:21:09 -04:00
3df3ca962c
Voron 0.1 mounting brackets with/without RPi 4 for Duet 2 WiFi boards ( #346 )
...
* Create DaGlo
Duet 2 Wifi bracket for Voron V0.1 with and without Raspberry support
* Delete DaGlo
* Voron V0.1 - Duet 2 Wifi bracket
with and without raspberry support
* stl files
* Delete test
* Duet 2 Wifi mounting bracket for the Voron V0.1
* Update README.md
Inserted Folder DaGlo with Voron V0.1 Duet 2 WiFi mounting bracket with/without RPi 4 support
* Delete Duet2Wifi_Mounting_Bracket.stl
* Fixed Path
* Delete Duet2Wifi_Mounting_Bracket w pi.stl
* Delete README.md
* Add files via upload
* Delete Duet2Wifi_Mounting_Bracket w pi.stl
* Add files via upload
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2021-06-16 14:01:52 -04:00
b230dfdcd8
Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions ( #347 )
...
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
2021-06-16 08:08:53 -04:00
bbd43dfc64
Added a strain relief that mounts a 10 pin micro fit connector on the hotend. ( #332 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Update Readme.md
Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Update README.md
* Add files via upload
* Update readme.md
* Create readme.md
* Add files via upload
* Delete pic1.JPG
* Delete pic2.JPG
* Delete pic3.JPG
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
2021-06-13 19:28:06 -04:00
a68e7918a6
Ender 3 Switchwire Conversion Y Tensioner Mod ( #339 )
...
* Create README.md
* Create README.md
* Create README.md
* Create README.md
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Delete README.md
* Delete README.md
* Add files via upload
* Delete README.md
* Delete assembled.jpg
* Delete installed.jpg
* Delete parts.jpg
* Delete stack.jpg
* Create README.md
* Add files via upload
* Delete README.md
* Update README.md
* Update README.md
* Delete HEXNUT.stl
* Add files via upload
Fixed the printability issue with the hexnut file
2021-06-12 19:25:36 -04:00
69b8a2db92
Add BTT PITFT50 v2 Touch Display Mount ( #338 )
...
* Add BTT PITFT50 v2 Mount
* remove spaces in filenames
* Chamfer to screw holes and add links to sttts's mod for the mount
2021-06-10 20:34:45 -04:00
e1c843cb59
V0_Handles_Slim ( #337 )
...
* Create README.md
* Added Stls and Screenshots
* Updated the README
* Update README.md
* Typo
* Updated Link to images
* Typo again
* Delete V0_Handles_Slim_3_Panel.stl
Removed Unadjusted 3mm File
* Delete V0_Handles_Slim_2.5_Panel.stl
Removed Unadjusted 2.5mm file
* Added Adjusted stls
2021-06-06 19:15:00 -04:00
74944d98d9
Raspberry pi zero w bracket ( #335 )
...
* Create README.md
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
2021-06-02 13:27:40 -04:00
f7a71c21fd
Horizontal spool holder ( #220 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
* Update readme.md
* Create Holder.stp
upload STEP file format
* Update README.md
* Update README.md
* Update README.md
* Update readme.md
* Update readme.md
* update image filename
* Update readme.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-06-02 11:18:11 -04:00
c3eeeafb19
Add Mini-Afterburner ADXL345 Mount ( #333 )
2021-06-01 20:05:39 -04:00
77abf74fd5
VEFACH - Voron Exhaust Filter Activated Coal + Hepa ( #331 )
...
* Create README.md
* Create stlcad.md
* Add files via upload
* Create Images.md
* Add files via upload
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
Voron Exhaust Filter Inserts to use active coal particles and a Hepa filter.
* Added VEFACH - Voron Exhaust Filter Activated Coal + Hepa
Updated README.md with "VEFACH - Voron Exhaust Filter Activated Coal + Hepa"
* Rename printer_mods/KevinAkaSam/VEFACH/STL+CAD/stlcad.md to printer_mods/KevinAkaSam/VEFACH/STL_CAD/stlcad.md
* Delete printer_mods/KevinAkaSam/VEFACH/STL+CAD directory
* Add files via upload
* Add files via upload
* Update stlcad.md
* Delete Images.md
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
Added some information and fixed spelling mistakes.
* Delete 1_coal.stl
* Delete 0_filter_dont_print.stl
* Add files via upload
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
Added information and a version with modeled-in mesh.
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
Added some information and a version with modeled-in mesh.
2021-05-31 13:07:07 -04:00
6f29da5bbc
Add V0 Neopixel Front Bed Mount ( #327 )
...
* Add V0 Neopixel Front Bed Mount
* clarify installation re: friction fit
2021-05-27 19:24:25 -04:00
7744bfd18e
Add Mini Afterburner Strain Relief ( #326 )
2021-05-27 16:33:28 -04:00
f4599650c0
Hartk board mount for galileo ( #320 )
...
* Create README.md
* Add files via upload
* Optional spacers
Used to space board away from the mount.
* Fit
* Simple board mount for Hartk BOB
Simple board mount for Hartk BOB
* Delete printer_mods/Majarspeed directory
* Created desc
* Mounted
* Delete printer_mods/Majarspeed/Hartk_Board_mount directory
* Create Majarspeed
* Delete Majarspeed
* Initial
* Create README.md
* Test fit
* Optional stand offs
* Initial upload
* Update README.md
* Delete Hartk board mount optional spacers.stl
* Upload Optional Spacer
If you need or want to increase distance from the body.
* Delete Hartk board mount.stl
Remove to rename
* Add files via upload
* Add files via upload
* Update README.md
* Delete Hartkboard mount.jpg
* Add files via upload
* Delete Hartk_board_mount_galelieo.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete Hartk _optional_spacer_X2.stl
* Add files via upload
2021-05-26 22:10:47 -04:00
cd4b3ce943
Added side panels ( #325 )
...
* Initial import
* Create README.md
* Update README.md
* Corrected file names
* Fixed missing finger grip on mounting plate
* Update Panel_Mount_v2.stl
* Updated stl
* Added side panels
* Renamed mod
* Update README.md
2021-05-25 21:14:31 -04:00
2b083e7270
Voron2.4 cable organizers; Crydom SSR terminal guard ( #316 )
...
* Voron2.4 cable organizers; Crydom SSR terminal guard
* Fix tpyos; print bolt hole without supports
* add sparks
* Updated overhangs
* Simplify a bit
* Updated README.md to mention hex driver
Co-authored-by: evandepol <erik@Sambuca.vdp.home>
2021-05-23 20:57:13 -04:00
f6a9645834
Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 ( #318 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Update Readme.md
Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.
* Add files via upload
2021-05-22 17:12:10 -04:00
d70794c367
Add V0 No-Drop Nuts ( #266 )
...
* Add V0 No-Drop Nuts
Working nicely.
* Fix wrong ref to MakerBeam - needs changes due to profile shape
* Add .step files for each No-Drop Nut
* Show where each file goes, more clearly; clarify LDO-only further
* Fix typos
Co-authored-by: Brandon Heller <brandon.heller@gmail.com>
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-05-18 18:02:20 -04:00
a0f0dfd92d
V0 Magnetic Front Panel ( #315 )
...
* Initial import
* Create README.md
* Update README.md
* Corrected file names
2021-05-18 16:57:44 -04:00
259b2d3e27
Added tool to precisely cut PTFE Tube for Mosquito in the V0.1 tool head. ( #314 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
2021-05-16 20:23:46 -04:00
797971d5ec
Add DIN Rail Mount for FYSETC Spider ( #313 )
...
* Create hoschi
* Delete hoschi
* Create README.md
* Add files via upload
* Create .gitignore
* Delete .gitignore
* Create .dir
* Add files via upload
* Delete .dir
* Create .del
* Add files via upload
* Delete .del
* Delete spider_spacer_x4.stl
* Delete spider_bracket_vertical_usb.stl
* Delete spider_bracket_vertical_usb.step
* Delete spider_bracket_vertical_terminal.stl
* Delete spider_bracket_vertical_terminal.step
* Delete spider_bracket_horizontal_usb.stl
* Delete spider_bracket_horizontal_usb.step
* Delete spider_bracket_horizontal_terminal.stl
* Delete spider_bracket_horizontal_terminal.step
* Delete spider.spacer.step
* Create .del
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Added printed FYSETC Spider DIN Rain Mount
* Update README.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update README.md
* Add files via upload
* Add files via upload
* Delete horizontal_rail.jpg
* Delete vertical.rail.jpg
* Delete .del
* Update README.md
* Update README.md
* Update README.md
* Delete vertical.rail.jpg
* Update README.md
2021-05-13 08:17:07 -04:00
4c070b5eb9
Added files for BTT Smart Filament Motion Sensor Mounts ( #310 )
...
* Added files for BTT Smart Filament Motion Sensor Mounts
Added files for BTT Smart Filament Motion Sensor Mounts
* Changed STLs
Changed STls and fixed text
* Update README.md
Updated Readme.md
2021-05-11 08:15:59 -04:00
3919e74788
Mantis Dual 5015 Toolhead ( #306 )
...
* Create readme.md
* Create readme.md
* Add files via upload
Initial Upload
* Update and rename readme.md to README.md
* Delete printer_mods/Long/Mantis_Dual_5015 directory
* Create README.md
* Add files via upload
Initial Upload
* Add files via upload
* Delete Magprobe_Dock_Arm_Annex.stl
* Delete Magprobe_dock_mount_12mm_taller.stl
* Update README.md
* Update README.md
* Delete Magprobe_Longs_3point.stl
* Add files via upload
* Delete Magprobe_Longs_v0.3.stl
* Add files via upload
got rid of unnecessary hole
* Add files via upload
* Update README.md
added line for Long
* Update README.md
* Add files via upload
re exported as stl. did a repair with netfabb for good measure. hopefully this works.
* Delete Carriage_v1.031.stl
* Delete Carriage_v1.036.stl
* Delete Mount_Dragon_v1.033.stl
* Add files via upload
* Delete Carriage_v1.031.stl
* Add files via upload
chamfered inner unsupported holes
* Delete Readme_v1.01.pdf
* Add files via upload
changed wording on acknowledgements pg2
* Add files via upload
fixed a formatting error
2021-05-09 19:40:40 -04:00
29f5631711
New LED mount, exhaust filter housing and panel clip ( #284 )
...
* Update / add
added files
* edit
* edit: photos / links
* Update README.md
* edit pic
* Update README.md
* Create AngryLED_v1_3.png
* Update README.md
* update
* update pic
* -
* add pics
* edit photos
* Update README.md
* added other panel clips
* added AngryLED small
* correction
* update: overhang
* update
* update
* updated printability
2021-05-09 12:47:30 -04:00
80d2577a16
Mounts for Terminal_Blocks NC933 SPL-62 ( #285 )
...
* Terminal_Blocks_NC933_SPL-62
Mounts for Terminal Blocks NC933 SPL-62 from AliExpress
* Removed space in directory
Removed space at the end of the directory name
* Update README.md
Changed text
* Update README.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-05-08 08:41:47 -04:00
f0801d144b
A Clippable V0 LED Caselight ( #307 )
...
* joposter: add v0 clippable led mount
add CAD
add STLs
wrote readme
* joposter: add clippable led mount to global printer_mods readme
* v0_clippable_ledmount: remove combined plate stl
* v0_clippable_ledmount: add small note about self-glueing led adhesive
Co-authored-by: Julian Daube <joposter@gmail.com>
2021-05-08 08:25:56 -04:00
83da26518a
Galileo adxl356 chain mount ( #308 )
...
* V2 PowerSkirt
* Galileo adxl chain mount
* Galileo adxl356 chain mount
* Refix readme.md
* Update README.md to correct syntax
2021-05-08 08:21:47 -04:00
968ccc0cec
Jeoje mods PR ( #251 )
...
* Create README.md
* Initial file add
* Update README.md
* Update README.md
* Update README.md
* Updated files
* Fixed unneeded text
* Rename and update wording to replace
'retainer' with 'guide'
* Update wording
* Initial commit
* Updated parent readme
* Update screen mount readme
* Initial commit for "Sturdy Handles"
* Update sturdy handles readme
* Initial commit for the MLX/MF3.0 Connector Mount
* Update readme for bed connector
* Update orientation
* Update MLX Mount Readme
* - Updated 4.3_Inch_Touchscreen_Mount README
-- Include "images/CAD_offset_profile.png"
-- Use relative links to github
-- Add qty of parts to print
* - Fixed - Z Chain Thermistor Mount hole no longer
prints in air
* - Fixed URL for Roboticator's skirts
2021-05-07 20:16:10 -04:00
020918a259
Generic plug panel for the 2.4 ( #305 )
2021-05-07 08:27:14 -04:00
353fe459e2
Release of AB-BN on github
...
This is release of AB-BN-30. This is an afterburner improvement using a 5015 part fan.
fixing the space in the foldername
renaming the F3d file
the cad file had a space in the name, removing it.
editing changes as suggested by Kilo
Lots of changes to readme based on Kilo's excellent suggestions.
Updated readme to explain the shims
Updated readme to explain the shims
It's an integral
Update AB-BN-28_Hotend-E3Dv6-Back.stl
fixed offset on E3dV6 back
Corrected more issues in readme from Kilo
Fixed print orientation E3DV6 back
Bring printer_mods/README.md up to date.
2021-05-06 16:26:45 +02:00
8b06186c24
Add mounts that use metal DIN clips ( #303 )
...
* Create README.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Delete README.md
* Update README.md
* Delete printer_mods/Oakman directory
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
2021-05-05 16:21:31 -04:00
4cd9b23fd2
Add Mod Removable doors ( #293 )
...
* Add Mod ElPoPo / RemovableDoor
A 2.4 mod to easily remove door
* Update Charnier_V3.1_x4.stl
* Renaming stls
2021-05-04 19:42:41 -04:00
cd58b73a65
Single panel magnet ( #299 )
...
* Initial commit, base files
* Add readme
* Adjust directory structure, add images
* Improve read-me with more instructions/future plans
* Add todo for m3 drill template to readme
* Readme update
* Fix issue with extrusion size change causing overlap in mirroring. Group history into named sections. Fix orientation of model.
* Added more descriptions to parameters
* Reduce heatset count
* Add STEP file
* Update readme
* Update to use smaller magnets. Added drill guide prints. Updated design and STL files. Update readme with more details/instructions.
* Add source link for t nuts
* Add source for foam
* Add total estimated cost
* Add STL for 250 and 350 sizes
* Add top level readme entry
* Remove text specific to 300 size
* Remove m3 heatset offset that is no longer required
* Remove spaces
* Bug fix. Rail slot m3 hole fillet should have been chamfers. Export all the things again.
Co-authored-by: altmank <mailspamhere@gmail.com>
2021-05-02 19:17:40 -04:00
Geoffrey Young
Slidr666
Richard Mitchell
JoAnn Manges
Frank Tackitt
beaugalbraith
Thiago Locatelli
hergtoler
khay8485
Jason Ragsdale
Leandro Marceddu
Bart Lammers
spacelab2021
MikesMods
newphreak
boingomw
Mustafa Cosku KURT
KiloQubit
120decibell
eddie
Derpimus
Marijn Siemons
bobbleheed
henrikssn
AndrewEllis93
John Gehrig
Nathan
csch0
christophmuellerorg
Eric Kelly
Baltojikale
lococnc
Gi7mo
Oli Wright
ObstacleTAKUYA
Jon Sanders
QuackProfit
mandryd
Padok
Yeriwyn
Robert
UltraWaffles
Shteeeeeve
Matthias Liffers
selliott79
conqueror433
Ray Ramirez
SSE018
Printopal
Rex Walters
MathematicalPotato
jlas1
Kyle
Daniel Glock
walttriano
Wile.e
buzzdalf
Alan Ho
CharlesB
Osiel Gaona
Keith
andrepl
Kevin Aka Sam
majarspeed
Erik van de Pol
zruncho3d
hoschi73
empusas
42bios
Julian Daube
jeoje
henrikssn
Aaron Herrick
Oakman
elpopo
altmank