Orbiter clockwork adaptor mod (#441)

* Created Orbiter-Clockwork Folder

* Added mod description for the Orbiter clockwork.

* Updated Requested Changes

Updated Links and Compatibility check.

* Update README.md

* Updated BOM

* Updated spelling error.

* Updated Step file.

* Updated File name and STL

printer_mods/README.md

@@ -233,6 +233,7 @@ like so:
 | sse018 | [Octopus DIN Rail bracket](./sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | :x: | :x: |:heavy_check_mark: | :x: |
 | Slidr | [PanzerChain 2.4](./Slidr/PanzerChain2.4) | Energychain for V2.4 | :x: | :x: | :heavy_check_mark: |:x:|
 |sloscotty|[Switchwire Wall Plate](./sloscotty/SW_Wall_Plate)|SW plate for enclosure|:x:|:x:|:x:|:heavy_check_mark:|
+| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full integration into the Afterburner. Includes a filament quick release lever for simple filament loading and unloading. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | Spaghetti-Bolognese |[Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | :x: | :x: | :heavy_check_mark: |:x:|
 | |[LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | :x: | :x: | :heavy_check_mark: |:x:|
 | Shteeeeeve | [V0.1 LED Tophat](./Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | :heavy_check_mark: | :x: | :x: | :x: |

printer_mods/spacelab2021/Orbiter-Clockwork/README.md

@@ -0,0 +1,38 @@
+# Orbiter Clockwork Module
+This Clockwork module allows the use of the Orbiter v1.5 Extruder in the Voron Afterburner.
+
+## Features
+One of the main issues I observed when using the orbiter was a lack of a quick filament release in addition to a lack of a suitable clockwork adapter that would swap an orbiter directly into the Afterburner ecosystem. Many of the issues observed were addressed with this Clockwork Module. This version provides a chain anchor for the Voron 2.4 and the Switchwire, a Cable Cover, and a quick filament release lever.
+
+## Bill of Materials (BOM)
+
+| Quantity | Name                                                                                        | Type      |
+|----------|---------------------------------------------------------------------------------------------|-----------|
+| 1        | Orbiter v1.5 Extruder [Orbiter Thingiverse link](https://www.thingiverse.com/thing:4725897) | Hardware  |  
+| 9        | M3 Heat Set Inserts [McMaster Link](https://www.mcmaster.com/94180A331)                     | Hardware  |  
+|          |94180A331 or suitable inserts (Thread Pitch 0.5, Installed Length 3.8mm, Diameter ~5mm)      |           |   
+| 1        | M3x8mm SHCS                                                                                 | Hardware  |  
+| 1        | M3x16 SHCS                                                                                  | Hardware  | 
+| 2        | M3x20 SHCS                                                                                  | Hardware  |
+| 1        | PTFE 45mm (Dragon)                                                                          | Hardware  |
+| 1        | Clockwork Adaptor - Front                                                                   | Printable |
+| 1        | Clockwork Adaptor - Back                                                                    | Printable |
+| 1        | Cable/Connector Cover                                                                       | Printable |
+| 1        | Filament Quick Release                                                                      | Printable |
+| 1        | Chain Anchor (Version for Voron 1.8/Trident/2.4 and Switchwire)                             | Printable |
+
+
+
+  
+## Assembly Guide
+* [Orbiter Clockwork Assembly Guide](./docs/Orbiter_Clockwork_Manual.pdf)
+
+## Orbiter Clockwork Module Images
+![Image](./docs/images/Orbiter-Clockwork-Main.png)
+![Image](./docs/images/Orbiter_Clockwork_Module-Right_Side.png)
+![Image](./docs/images/Orbiter_Clockwork_Module-Back_Left.png)
+![Image](./docs/images/Orbiter_Clockwork_Module-Back_Right.png)
+
+## Release History
+* Version 1.0 
+   * Orbiter Clockwork Adaptor has been verified to fit and function on a Voron 2.4 and a Switchwire. Additional testing may be required to fix any minor or major issues that are identified in the future. If you observed any issues, please create an issue so it can be tracked.