Magnetic Panels (#405)

* Create README.md

* Create README.md

* Add files via upload

* Delete README.md

* Create README.md

* Delete README.md

* Create README.md

* Add files via upload

* Delete README.md

* Add files via upload

* Create README.md

* Add files via upload

* Delete README.md

* Add files via upload

* Delete Cap Assembly.png

* Add files via upload

* Update README.md

* Update README.md

* Delete Magnetic_Cap_6mm.stl

* Add files via upload

* Update README.md

* Rename printer_mods/bobbleheed/V2.4_Magnetic_Panels/README.md to printer_mods/bobbleheed/Magnetic_Panels/README.md

* Update README.md

* Create README.md

* Add files via upload

* Update README.md

* Delete README.md

* Create README.md

* Add files via upload

* Delete README.md

* Add files via upload

* Delete printer_mods/bobbleheed/V2.4_Magnetic_Panels directory

* Create README.md

* Add files via upload

* Delete README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Delete Magnetic Panel Corner Clips.f3d

* Delete Magnetic_Panel_Corner Clips_6mm.f3d

* Create readme.md

* Add files via upload

* Delete readme.md

* Delete Magnetic_Cap_6mm.stl

* Add files via upload

* Correct STL orientation

* Correct Orientation of Cap

* Correct File Orientation

printer_mods/README.md

@@ -57,6 +57,7 @@ like so:
 |BlueBear|[Deck Panel Backpack](./BlueBear/Deck_Panel_Backpack)|A mounting alternative if you don't want to drill your deck panel | :heavy_check_mark: | :x: | :x: |:x:|
 ||[Clippable Wago 221 Mounts](./BlueBear/Wago_221_mount)|Mounts for Wago 221 to screw or clip-in on 1515 extrusions | :heavy_check_mark: | :x: | :x: |
 ||[Ziptie Mount](./BlueBear/Ziptie_Mount)|Clippable Ziptie hooks for 1515 extrusions| :heavy_check_mark: | :x: | :x: |
+| bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic corner clips to allow for easy removal and install of panels | :x: | :grey_question: | :heavy_check_mark: | :x: |
 | btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount/README.md) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:|
 | buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:|
 ||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: |

printer_mods/bobbleheed/Magnetic_Panels/README.md

@@ -0,0 +1,37 @@
+# Magnetic Panels
+
+This mod allows for the easy removal of the panels on a V2, ideal for switching between ABS and PLA printing. This mod assumes a panel depth of 6mm, either from a 6mm panel or a 3mm panel + 3mm foam tape. It will not hold the panels against the frame without this thickness. 
+
+## BOM (for top and side panels)
+
+   | Material | Quantity |
+   |----------|----------|
+   | 6x3 Magnets | 72 |
+   | M3x8 SHCS | 24 |
+   | M3 Roll In or Hammerhead T Nuts | 24|
+   | VHB Tape | |   
+  
+  
+To reduce the number of magnets required, it is possible to install just two or even one per printed part. This has not been tested and the hold strength unknown.
+
+### Assembly
+
+#### Mount Assembly 
+
+![Magnetic Mount Assembly](./IMAGES/Mount_Assembly.png)
+
+Pressfit the magnets into the housing. Use the M3x8 SHCS and T Nuts to secure mounts to the frame. 
+
+It is easiest to install using the regular panel clips to hold the panel in position, this allows the mounts to be positioned with some clearance to the panel allowing smoother attachment of the system following installation. To make full use of this added convenience, fully complete installation of a single clip before repeating the procedure for the remainder on each panel.  
+<br>
+
+#### Cap Assembly
+
+![Magnetic Cap Assembly](./IMAGES/Cap_Assembly.png)
+
+Pressfit the magnets into the housing ensuring the poles are aligned between the mount and cap. Apply the triangular section of VHB tape and with the panel in position on the frame lower the magnet side into position before pressing the tape firmly against the panel. 
+<br>
+
+![Magnetic Mount Assembly](./IMAGES/Final_Assembly.png)
+
+The panel can now be pulled straight off the frame for removal, before being replaced with as much ease.