Jeoje mods PR (#251)
* Create README.md * Initial file add * Update README.md * Update README.md * Update README.md * Updated files * Fixed unneeded text * Rename and update wording to replace 'retainer' with 'guide' * Update wording * Initial commit * Updated parent readme * Update screen mount readme * Initial commit for "Sturdy Handles" * Update sturdy handles readme * Initial commit for the MLX/MF3.0 Connector Mount * Update readme for bed connector * Update orientation * Update MLX Mount Readme * - Updated 4.3_Inch_Touchscreen_Mount README -- Include "images/CAD_offset_profile.png" -- Use relative links to github -- Add qty of parts to print * - Fixed - Z Chain Thermistor Mount hole no longer prints in air * - Fixed URL for Roboticator's skirts
jeoje
GitHub
|
|
@ -99,6 +99,10 @@ like so:
|
|||
|Iakabos| [c920_Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
|
||||
| | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: |:x:|
|
||||
|jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |:x:|
|
||||
|jeoje |[V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount](./jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor |:x: |:x: |:heavy_check_mark: |:x:|
|
||||
| | [V2.4 4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 Vorons |:x:|:x:|:heavy_check_mark:|:x:|
|
||||
| | [Sturdy Handles](./jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points |:x: |:grey_question:|:heavy_check_mark:|:x:|
|
||||
| | [Molex MLX and Microfit 3.0 Bed Connector Mount](./jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors |:x: |:x:|:heavy_check_mark:|:x:|
|
||||
| JNP | [Back Door](./JNP/Back-Door) | Door for easy hardware access | :heavy_check_mark: |:x: |:x: |:x: |
|
||||
| | [Deck Panel](./JNP/Deck_Panel_Rear)| Covers the hotbed cables | :heavy_check_mark: |:x: |:x: |:x: |
|
||||
| | [Drawer](./JNP/Drawer)| Drawer in four different versions | :heavy_check_mark: |:x: |:x: |:x: |
|
||||
|
|
|
|||
|
|
@ -0,0 +1,52 @@
|
|||
# Voron v2.4 4.3" Touchscreen Mount
|
||||
|
||||
Inspired by [Roboticator's excellent 4" touchscreen mount](../../roboticator24/4inch_touchscreen_mount_for_v2.4), I wanted to use a capacitive touchscreen and a DSI connection instead.
|
||||
|
||||
This mod mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) purchased from [Amazon](https://smile.amazon.com/gp/product/B083TG7Y9B/). The screen is oriented at a 60 degree angle keeping the height the same as a standard skirt.
|
||||
|
||||
<div align="center">
|
||||
<img src="images/CAD_front_profile.png" height="400">
|
||||
<img src="images/CAD_side_profile.png" height="400">
|
||||
<img src="images/CAD_offset_profile.png" height="400">
|
||||
<img src="images/CAD_mount_side_profile_angle.png" height="400">
|
||||
<img src="images/CAD_mount_offset_profile.png" height="400">
|
||||
</div>
|
||||
|
||||
|
||||
#### Combine with [Roboticator's modified skirts](https://github.com/roboticator24/VoronUsers/tree/master/printer_mods/roboticator24/front%2Brear_skirts_for_v2.4) for a cleaner look.
|
||||
|
||||
<div align="center">
|
||||
<img src="images/Mounted_1.jpg" height="250">
|
||||
<img src="images/Mounted_2.jpg" height="250">
|
||||
</div>
|
||||
|
||||
## Parts Required
|
||||
| Part | Quantity | Comment|
|
||||
|------|------|--------|
|
||||
| M3 X 8 SHCS/BHCS Screw | 3 | |
|
||||
| M3 T-Nut | 3 | |
|
||||
| M2 x 10 Self Tapping Screws | 2 | Optional |
|
||||
| M2.5 Screws | 4 | Included with screen |
|
||||
| DSI Cable | 1 | Long enough to reach your Pi |
|
||||
|
||||
## Printing
|
||||
- Print 1 * faceplate and 1 * screen_mount
|
||||
- Print using standard Voron part settings and in the orientation used in the STL
|
||||
- No supports required, but there is one bridge in the mount, the bottom layer of which is not in view once installed
|
||||
- Voron logo is inset .2mm intentionally to force the solid infill around the hex. You should not need to support this.
|
||||
- Use concentric infill for the bottom layer for a different effect
|
||||
|
||||
<div align="center">
|
||||
<img src="images/Voron_logo.jpg" height="400">
|
||||
</div>
|
||||
|
||||
|
||||
## Installation
|
||||
1. Attach the screen to the mount using 4 x M2.5 screws that were included with the screen
|
||||
1. Ensure the screen slid as high on the mount as possible
|
||||
2. Slide the faceplate onto the screen from the bottom, ensuring the sides remain latched behind the PCB
|
||||
3. Fasten the mount to the bottom extrusion in place of the spec LCD/mount
|
||||
1. You may need to leave the screen screws slightly loose to ensure the M3 screws clear it. Ensure to tighten afterwards.
|
||||
4. Slide the faceplate up until it is flush to the extrusion
|
||||
5. Optional: Secure the faceplate with (2) 2 x 10 self tapping screws through the tabs on each side
|
||||
6. Connect your DSI cable
|
||||
|
After Width: | Height: | Size: 162 KiB |
|
After Width: | Height: | Size: 127 KiB |
|
After Width: | Height: | Size: 82 KiB |
|
After Width: | Height: | Size: 490 KiB |
|
After Width: | Height: | Size: 140 KiB |
|
After Width: | Height: | Size: 312 KiB |
|
After Width: | Height: | Size: 380 KiB |
|
After Width: | Height: | Size: 232 KiB |
|
|
@ -0,0 +1,29 @@
|
|||
# Molex MLX and Microfit Bed Connector Mount
|
||||
|
||||
This part provides a solid mount for the 3 circuit MLX receptacle and a 2 circuit Micro-Fit 3.0 plug housing from the v2.4 BOM. I recommend you put these connectors on the electronics side. Mounting the connectors this way allows you to more easily hide the wires and disconnect the bed from the printer with one hand after lifting the bed. It can be mounted on either bed extrusion, and in either Y orientation you prefer. Example orientations are shown in the images.
|
||||
|
||||
<div align="center">
|
||||
<img src="images/MLX_MF3_Render.png" height=400>
|
||||
<img src="images/photo1.jpg" height=400>
|
||||
<img src="images/photo2.jpg" height=400>
|
||||
<img src="images/photo3.jpg" height=400>
|
||||
<img src="images/photo4.jpg" height=400>
|
||||
</div>
|
||||
|
||||
## Parts Required
|
||||
| Part | Quantity | Comment|
|
||||
|------|------|--------|
|
||||
| M3 X 8 SHCS | 2 | |
|
||||
| M3 T-Nut | 2 | |
|
||||
|
||||
## Printing
|
||||
|
||||
- Print using standard Voron part settings and in the orientation used in the STL
|
||||
|
||||
## Installation
|
||||
- The MLX connector should snap in smoothly
|
||||
- It must be inserted from the flat side of the mount and only in 1 orientation
|
||||
- Orient the alignment flange closer to the screw-side of the mount
|
||||
- The Micro-Fit 3.0 will be a little more difficult to insert. Apply pressure until it snaps into place
|
||||
- Both will come back out without destroying the connectors or mount, but it takes some finesse
|
||||
|
||||
|
After Width: | Height: | Size: 196 KiB |
|
After Width: | Height: | Size: 117 KiB |
|
After Width: | Height: | Size: 104 KiB |
|
After Width: | Height: | Size: 142 KiB |
|
After Width: | Height: | Size: 235 KiB |
|
|
@ -0,0 +1,23 @@
|
|||
# Voron v2.4 Sturdy Handles
|
||||
|
||||
I wanted handles for the v2.4 that were a bit more sturdy than I've been able to find and that didn't act as a clip for the panels. That's what I have the clips for :). This is a modified v2.2 handle that has 4 anchor points. It will not work on the bottom extrusions if you're using skirts, but should anywhere that has access to 2 adjacent sides of an extrusion. It has 6mm of clearance on the side that will go over the panel slightly.
|
||||
|
||||
<div align="center">
|
||||
<img src="images/side_profile.png" height=400>
|
||||
<img src="images/offset_profile.png" height=400>
|
||||
<img src="images/photo.png" height=400>
|
||||
</div>
|
||||
|
||||
## Parts Required
|
||||
| Part | Quantity | Comment|
|
||||
|------|------|--------|
|
||||
| M5 X 12 SHCS | 2 | |
|
||||
| M5 T-Nut | 2 | |
|
||||
|
||||
## Printing
|
||||
|
||||
- Print using standard Voron part settings and in the orientation used in the STL
|
||||
- Supports should not be needed, but the overhang is < 45 degrees. That area is hidden from view and tolerances don't really matter there. Regardless, it prints clean for me.
|
||||
|
||||
## Installation
|
||||
- You will likely need to move the top panel out of the way for installation. I just removed clips from one side and the middle to lift it up a bit.
|
||||
|
After Width: | Height: | Size: 100 KiB |
|
After Width: | Height: | Size: 1.0 MiB |
|
After Width: | Height: | Size: 26 KiB |
|
|
@ -0,0 +1,20 @@
|
|||
# Voron V2.4 Z Chain Guide with Integrated Thermistor Mount
|
||||
|
||||
When looking for a clean way to mount a chamber temperature sensor, the Z chain guide seemed like a perfect opportunity. It should fit any thermistor with a 3mm barrel.
|
||||
|
||||
<div align="center">
|
||||
<img src="images/render1.png" height="350" hspace="10">
|
||||
<img src="images/render2.png" height="350">
|
||||
</div>
|
||||
|
||||
|
||||
## Installation
|
||||
1. Route your wire through the Z chain to the rear X extrusion
|
||||
2. Secure the wire inside that extrusion
|
||||
3. Insert the thermistor into the mount
|
||||
4. Attach the mount to the extrusion, positioned to hold the Z chain vertical*
|
||||
|
||||
****NOTE:** Ensure you have enough links in your Z chain to clear the guide when at max Z.*
|
||||
|
||||
<br />
|
||||
<img src="images/max-z.png">
|
||||
|
After Width: | Height: | Size: 2.0 MiB |
|
After Width: | Height: | Size: 169 KiB |
|
After Width: | Height: | Size: 122 KiB |