Remove GalileoADXL, incompatible with newer Galileo (#472)

* Delete printer_mods/leandromarceddu/GalileoADXL directory

Does not work anymore

* Update README.md

Removed GalileoADXL

printer_mods/README.md

@@ -172,7 +172,6 @@ like so:
 | |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |:x:|
 | lakai | [Bruag Skirts](./lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | :x: | :x: | :heavy_check_mark: | :x: |
 |leandromarceddu|[PowerSkirt](./leandromarceddu/PowerSkirt) |Modified skirtpiece for a digital power monitor|:x:|:grey_question:|:heavy_check_mark:|:grey_question:|
-||[Galileo adxl356 mount](./leandromarceddu/GalileoADXL) |Modified galileo chain anchor to fit an adxl356|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 |littleferris |[V0 c14 Skirt Inlet](./littleferris/V0_Skirt_Inlet) |V0 C14 Skirt inlet |:heavy_check_mark: |:x: |:x: |:x:|
 |LoCoCNC| [MGN7H Shims](./LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar |:heavy_check_mark:|:x:|:x:|:x:|
 | | [Mosquito PTFE 15mm Tube Cutting Jig](./LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube |:heavy_check_mark:|:x:|:x:|:x:|

printer_mods/leandromarceddu/GalileoADXL/README.md

@@ -1,8 +0,0 @@
-ADXL356 mounts for the Galileo extruder
-============================
-
-These are my edited standard galileo chain mounts to be able to mount an adxl356 against it permanently. 
-I attached them with two M3x6. It'll work for an adxl356 of the following layout:
-![adxl](img/adxl_layout.jpg)
-It'll end up looking like this:
-![perm_mount](img/perm_mount.jpg)