"Other" V2 Idlers Mod (#369)

* Create README.md

* Update README.md

* Add files via upload

* Create README.md

* Delete README.md

* Delete Other_Idler_V2.step

* Delete Other_Idler_V2.f3d

* Delete Front_Idler_Bottomx2.stl

* Delete Front_Idler_Topx2.stl

* Delete [a]_Idler_Carrierx2.stl

* Add files via upload

* Add files via upload

* Update README.md

* Delete printer_mods/Phalanx directory

* Create Other-V2-Idlers

* Delete printer_mods/Phalanx directory

* Create README.md

* Update README.md

* Update README.md

* Initial File Upload

* Added Other Idlers to readme.md - alphabetical

* Fixed Link

* Added Images File

* Update README.md

* Update README.md

* Update README.md

* Update README.md

Changed BOM to list format

* Update README.md

Added note for fully-threaded screw

* Update README.md

* Add files via upload

* Delete 20210619_102801.jpg

* Delete 20210619_203112.jpg

* Delete 20210619_204308.jpg

* Delete 20210624_092643.jpg

* Delete 20210709_210049.jpg

* Update README.md

* Update README.md

Updated image links

* Delete Heat_Set_Note.jpg

* Delete Idler comparison.jpg

* Add files via upload

Updated image files

* Update README.md

updated file type in links

* Update README.md

Corrected Case on Images folder

* Update README.md

Added standards and settings

* Add files via upload

Added standards and settings snips

* Update README.md

* Update README.md

printer_mods/Phalanx/Other-V2-Idlers/README.md

@@ -0,0 +1,41 @@
+# "Other" V2 Idlers
+ Alternative Idlers that allow the usage of "Full-Figured" toolheads without the 10mm loss of travel at the front corners of the bed.
+
+These idlers were developed with the goal to allow the usage of wider toolheads with the Voron V2, better align the tensioning screw to the centerline of the idler shaft, add guides to the parts to allow them to interlock and provide a robust tensioning system, all while streamlining the process of making fine adjustments to tensioning. 
+This design iteration has been running on my machine for 50+ hrs with no issues or print quality degradation.  
+
+The idler design is ambidextrous to allow simplified batch printing. All parts are converted to stl in optimal printing orientation with quantities specified per Voron standards.
+
+# Print Settings:
+All parts should be printed to standard Voron print settings for durability.
+
+-Note: If your printer is not properly tuned i.e. printing dimensionally-accurate parts free from functional defects, the slide mechanism WILL NOT work proerly. 
+
+# BOM:
+- 2 ea. 5mm OD x 45mm L pins - may need to be polished down to fit the bearings depending on source. 
+- 4 ea. F695 bearings
+- 4 ea. 0.5mm thick 5mm shims
+- 2 ea. M3x35mm length SHCS - Stock 40mm may be run if not using the bolted door hinge mod. **NOTE: This screw should be fully threaded!!!.  
+- 2 ea. M3 flat washer
+- 2 ea. M3 nut
+- 2 ea. Voron - standard heat set
+- 2 ea. M3 x 16 SHCS
+
+These components are being offered as a kit by https://formosissima.com/products/other-v2-idlers-kit
+
+This mod also requires that you run https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Gantry/%5Ba%5D_z_belt_clip_lower_x4.stl
+on both top and bottom as belt clips, so that the design is not handed. 
+
+![Idler comparison](Images/comparison.jpg)
+"Other" Idlers Thickness vs. stock V2.4 idlers
+
+![Idler Front](Images/front.jpg)
+
+![Idler Front](Images/heatset.jpg)
+Be sure to fully insert the m3 heat set insert so that it doesn't interfere with the bearings!
+
+![Installed](Images/Installed.jpg)
+
+![Installed 2](Images/Installed2.jpg)
+
+

printer_mods/README.md

@@ -188,6 +188,7 @@ like so:
 | |[RPI Metal DIN Mount](./Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 |ommy | [roller brackets](./ommy/roller_brackets) |Brackets to help rolling V2 on its side. |:x: |:x: |:heavy_check_mark: |:x:|
 |oxno | [RBP Zero Bracket](./oxno/rbp_zero_braket) |Bracket for Raspberry pi zero. |:x: |:heavy_check_mark: |:heavy_check_mark: |:grey_question:|
+|Phalanx |["Other" Idlers Mod](./Phalanx/Other-V2-Idlers/) | Allow usage of wider toolheads on the V2 |:x: |:grey_question: |:heavy_check_mark: |:x:|
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
 | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: | 
 |randell   |[Door Hinges](./randell/Door_Hinges) |Door hinges that use an M3 bolt for a pin and bolts thru the panel |:x: |:x: |:heavy_check_mark: |:x:|