TFT Display for Switchwire + Afterburner mount for Input shaper (also works for Y on SW) (#363)

* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions

* Printable orientation, removed spaces and renamed file

* Printable orientation, removed spaces and renamed file

* TFT Display for Switchwire and Input Shaper mount for Afterburner

* TFT Display for Switchwire and Input Shaper mount for Afterburner

* Updated based on PR comments

printer_mods/DoubleT/input_shaper_mount/readme.md

@@ -0,0 +1,14 @@
+# Input shaper mount for Afterburner
+
+This mod is for mounting the input shaper printed part in front of the afterbuner, but also mounting on the bed for the SW using the magnets. The threaded inserts are for securing the input shaper on the printed part.
+
+![image1](./images/image1.png)
+
+## BOM
+
+- 2 Threaded inserts (stock)
+- 2 M3x16 BHCS or SHCS
+- 2 M3x6 BHCS
+- 2 round magnets 8x4
+- Input Shaper [ADXL345](https://www.amazon.com/gp/product/B07DMZCGP9)
+

printer_mods/DoubleT/switchwire_tft_display/readme.md

@@ -0,0 +1,33 @@
+# 3.5in TFT Display Front Skirt - Switchwire
+
+This mod replaces the front middle skirt in order to mount a 3.5in touchscreen display for Klipperscreen. It has two printed parts: the main body and the front plate. Threaded inserts go into the main body and the M3x8 screws are used to mount the front plate onto the main body.
+
+![image1](./images/image1.png)
+
+![image2](./images/image2.png)
+
+## BOM
+
+- 5 threaded inserts (stock)
+- 4 M3x8 BHCS
+- [3.5in TFT Display](https://www.amazon.com/gp/product/B07KLDKM5D)
+
+## Software
+
+
+
+### Klipperscreen
+
+Follow this [tutorial](https://github.com/jordanruthe/KlipperScreen/blob/master/docs/Installation.md) to install Klipperscreen on your Raspberry Pi.
+
+### LCD Show
+
+Ssh into your Raspberry Pi and execute the following commands
+
+```
+sudo rm -rf LCD-show
+git clone https://github.com/Lcdwiki/LCD-show.git
+chmod -R 755 LCD-show
+cd LCD-show
+sudo ./MHS35-show
+```

printer_mods/README.md

@@ -82,6 +82,8 @@ like so:
 | |[Duet 3 3HC Din Bracket](./DorjeDorf/Duet_3_3HC_Din_Bracket) |  V2.4 Duet 3 3HC Din Bracket | :x: | :x: | :heavy_check_mark: |:x:|
 |DoubleT |[Afterburner Triple Bowden](./DoubleT/afterburner_triple_bowden) |AfterBurner Triple Bowden|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[Spider Mount Extrusion](./DoubleT/fysetc_spider_mount_extrusion) |Spider Mount for 2020/3030 extrusions|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
+| |[TFT Display skirt for Switchwire](./DoubleT/switchwire_tft_display) |TFT Display skirt for Switchwire|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
+| |[Input Shaper mount for Afterburner](./DoubleT/input_shaper_mount) |Input shaper mount for Afterburner|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 |doubletrouble |[V0 Skirt Mod](./doubletrouble/V0_Skirt_Mod) |V0 Skirt Mod |:heavy_check_mark: |:x: |:x: |:x:|
 |DrGhetto|[Ghetto Panels](./DrGhetto/GhettoPanels)|Printed panels for the Voron Zero|:heavy_check_mark:|:x:|:x:|:x:|
 |eddie |[V1.8 12mm Z Mod](./eddie/V1.8_12mm_Z_Mod) |Add V1.8 option for 12mm Z rods |:x: |:heavy_check_mark: |:x: |:x:|