add 4.3 inch display mount for switchwire (#392)

* add 4.3 inch display mount for switchwire

* update readme

Co-authored-by: Gi7mo! <github@gi7mo.org>

printer_mods/README.md

@@ -126,7 +126,7 @@ like so:
 | | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: |:x:|
 |jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |:x:|
 |jeoje |[V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount](./jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor  |:x: |:x: |:heavy_check_mark: |:x:|
-| | [V2.4 4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 Vorons |:x:|:x:|:heavy_check_mark:|:x:|
+| | [4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 and Switchwire Vorons |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:|
 | | [Sturdy Handles](./jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points |:x: |:grey_question:|:heavy_check_mark:|:x:|
 | | [Molex MLX and Microfit 3.0 Bed Connector Mount](./jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors |:x: |:x:|:heavy_check_mark:|:x:|
 | JNP | [Back Door](./JNP/Back-Door) | Door for easy hardware access | :heavy_check_mark: |:x: |:x: |:x: |

printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/README.md

@@ -1,4 +1,4 @@
-# Voron v2.4 4.3" Touchscreen Mount
+# Voron v2.4 & Switchwire 4.3" Touchscreen Mount
 
 Inspired by [Roboticator's excellent 4" touchscreen mount](../../roboticator24/4inch_touchscreen_mount_for_v2.4), I wanted to use a capacitive touchscreen and a DSI connection instead.
 
@@ -15,15 +15,23 @@ This mod mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waves
 
 #### Combine with [Roboticator's modified skirts](https://github.com/roboticator24/VoronUsers/tree/master/printer_mods/roboticator24/front%2Brear_skirts_for_v2.4) for a cleaner look.
 
+## 2.4
 <div align="center">
     <img src="images/Mounted_1.jpg" height="250">
     <img src="images/Mounted_2.jpg" height="250">
 </div>
 
+## Switchwire
+<div align="center">
+    <img src="images/Mounted_SW_1.jpg" height="250">
+    <img src="images/Mounted_SW_2.jpg" height="250">
+</div>
+
 ## Parts Required
 | Part | Quantity | Comment|
 |------|------|--------|
-| M3 X 8 SHCS/BHCS Screw | 3 | |
+| M3 X 8 SHCS/BHCS Screw | 3 |2.4 only|
+| M3 X 16 SHCS/BHCS Screw | 2 |Switchwire only|
 | M3 T-Nut | 3 | |
 | M2 x 10 Self Tapping Screws | 2 | Optional |
 | M2.5 Screws | 4 | Included with screen |
@@ -44,9 +52,13 @@ This mod mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waves
 ## Installation
 1. Attach the screen to the mount using 4 x M2.5 screws that were included with the screen
    1. Ensure the screen slid as high on the mount as possible
-2. Slide the faceplate onto the screen from the bottom, ensuring the sides remain latched behind the PCB
-3. Fasten the mount to the bottom extrusion in place of the spec LCD/mount
-   1. You may need to leave the screen screws slightly loose to ensure the M3 screws clear it.  Ensure to tighten afterwards.
+2. Slide the faceplate onto the screen from the bottom (for switchwire from top), ensuring the sides remain latched behind the PCB
+3. Fasten the mount
+   1. 2.4
+      1. Fasten the mount to the bottom extrusion in place of the spec LCD/mount
+      2. You may need to leave the screen screws slightly loose to ensure the M3 screws clear it.  Ensure to tighten afterwards.
+   2. Switchwire
+      1. Screw the mount at the same grill position as the 12864 display
 4. Slide the faceplate up until it is flush to the extrusion
 5. Optional: Secure the faceplate with (2) 2 x 10 self tapping screws through the tabs on each side
 6. Connect your DSI cable