"Bed Support Extrusions" Alignment Tools for Voron 2.4 and Trident (#478)

* Create Bed Support Alignment Tools

* Update README

* Update README

* Update README

* Update README

* Update README

* Updated README

* Update README

* Update README

* Fix CAD filename

* Updated README

Co-authored-by: GadgetAngel <joanmanges@gmail.com>

printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/README.md

@@ -0,0 +1,13 @@
+# Bed Support Alignment Tools for Voron 2.4
+
+This repository contains .stl files for the bed support aligment tools for each of the standard Voron 2.4 builds. The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame.  The Voron assembly manual does not state where the "bed support extrusions" should be placed, so I created this very simple tool that you can 3D print. When the alignment tools are placed in all four corners of the Voron 2.4 Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.  For completeness, I also created a piece that you can place in between the two "bed supports extrusions" as a second way to check to see if everything is correctly placed.
+
+
+## Picture of Bed Support Alignment Tool:
+
+![Bed Support Alignment Tools](images/Bed_Support_Alignment_Tools.jpg)
+
+## This is how to use the Alignment Tools:
+
+![Bed Suport Alignment Tools each pointed out](images/Bed_Suport_Alignment_Tools_each_pointed_out.jpg)
+

printer_mods/README.md

@@ -112,6 +112,7 @@ like so:
 | falo | [Magnetic Exhaust Grill Cover](./falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | :x: | :x: | :heavy_check_mark: | :x: |
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |:x:|
 | GadgetAngel | [Cricut Voron Logos](./GadgetAngel/Cricut_Voron_Logos) |For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire and Voron 0.0/0.1. These .svg files use a minimal amount of anchor points to achieve the vector shapes! | :heavy_check_mark: | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: |
+|  | [Bed Support Extrusions Alignment Tools](./GadgetAngel/Bed_Support_Alignment_Tools) |The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.|  :x: | :x: | :heavy_check_mark: |  :x: | :x: |
 | geoffreyyoung | [FYSETC SPIDER DIN Bracket](./geoffreyyoung/spider_bracket) | FYSETC SPIDER DIN Bracket | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: |
 | | [Dual Rail Installation Guide](./geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail installation | :x: | :x: | :heavy_check_mark: | :x: |
 | GiulianoM | [Fly F407ZG Mount](./GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | :x: | :x: | :heavy_check_mark: | :x: |