V0.1 LED Tophat Mod (#378)

* Create Shteeeeeve

* V0.1 LED Tophat Mod

* Update README.md

* Moving to Folder / Readme Updates

* Updates

* Updates

* V0.1 LED Tophat

* V0.1 LED Tophat

* V0.1 LED Tophat

* Update README.md

* V0.1 LED Tophat

* Update README.md

printer_mods/README.md

@@ -206,6 +206,7 @@ like so:
 |sloscotty|[Switchwire Wall Plate](./sloscotty/SW_Wall_Plate)|SW plate for enclosure|:x:|:x:|:x:|:heavy_check_mark:|
 | Spaghetti-Bolognese |[Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | :x: | :x: | :heavy_check_mark: |:x:|
 | |[LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | :x: | :x: | :heavy_check_mark: |:x:|
+| Shteeeeeve | [V0.1 LED Tophat](./Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | :heavy_check_mark: | :x: | :x: | :x: |
 | sttts | [Waveshare 5.5inch HDMI AMOLED Mount](./sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | :x: | :x: | :heavy_check_mark: | :x: |
 |StvPtrsn |[Skirts for a 320mm Build](./StvPtrsn/320mm_Build) |Skirts for a 320mm build |:x: |:x: |:heavy_check_mark: |:x:|
 | |[Keystone Jack for Filtered Mains Panel](./StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) |Add a keystone jack to your filtered mains plug panel |:x: |:x: |:heavy_check_mark: |:x:|
@@ -252,4 +253,4 @@ like so:
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Nameplate and color change printing  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
-| zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: |
+| zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: |

printer_mods/Shteeeeeve/V01-LED-Tophat/README.md

@@ -0,0 +1,41 @@
+# V0.1 LED Tophat
+
+![Image 1](Images/V01-LED-Tophat-01.jpg)
+
+## Printed Parts:
+1. LED Tophat - Main Body
+2. LED Tophat - Top Cover
+3. LED Tophat - Logo Insert
+
+## Parts:
+1. 4x M3x6 BHCS
+2. 4x M3x5x4 Heat Inserts
+3. 24V LED Lightstrip \\\ URL: https://www.amazon.ca/gp/product/B074XCKJYB/
+4. 22 AWG Wire
+
+## Printer Config:
+```
+[output_pin caselight]
+pin: PC9
+pwm:true
+shutdown_value: 0
+value: 1.0
+cycle_time: 0.01
+
+[gcode_macro LEDOFF]
+gcode:  SET_PIN PIN=caselight VALUE=0
+
+[gcode_macro LEDMIN]
+gcode:  SET_PIN PIN=caselight VALUE=.25
+
+[gcode_macro LEDMAX]
+gcode:  SET_PIN PIN=caselight VALUE=1
+```
+
+### Note -- I am using AC Bed with SSR. SSR output on PC12 (PWR-DET) and LED Lights are running off PC9 (BED)
+
+## Pictures
+![Image 1](Images/V01-LED-Tophat-02.jpg)
+![Image 2](Images/V01-LED-Tophat-03.jpg)
+![Image 3](Images/V01-LED-Tophat-wireframe-1.jpg)
+![Image 4](Images/V0-LED-Tophat-Photo.jpg)