Added side panels (#325)

* Initial import

* Create README.md

* Update README.md

* Corrected file names

* Fixed missing finger grip on mounting plate

* Update Panel_Mount_v2.stl

* Updated stl

* Added side panels

* Renamed mod

* Update README.md

printer_mods/README.md

@@ -213,7 +213,7 @@ like so:
 | | [V0 PiCam Mount](./xbst_/V0_Picam)| A Raspberry Pi Camera Mount For V0 | :heavy_check_mark: | :x: | :x: | :x: |
 | | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | Xceled | [Single Panel Magnet Mount](./xceled/Single_Panel_Magnet_Mount)| Mount your front panel using only magnets | :x: |:grey_question: |:heavy_check_mark: |:x:|
-| Yeri | [V0 Magnetic Front Panel](./yeri/V0_Magnetic_Front_Panel)| Mount V0 front panel with magnets, removes need for hinges | :heavy_check_mark: | :x: | :x: | :x: |
+| Yeri | [V0 Magnetic Panels](./yeri/V0_Magnetic_Panels)| Mount V0 panels with magnets, removes need for hinges and lets you easily detach sides for access | :heavy_check_mark: | :x: | :x: | :x: |
 | Zen3D | [V0 Handle](./Zen3D/V0_Handle)| Voron0 Handle for 3mm panels | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Nameplate and color change printing  | :heavy_check_mark: |:x: |:x: |:x:|

printer_mods/yeri/V0_Magnetic_Panels/README.md

@@ -1,13 +1,19 @@
 This mod comes in two parts, a fixed mounting plate which anchors to the v0 frame with m3x6 screws and a detachable front plate which holds the acrylic panel.
 
 ## BOM:
+### Front Panel
 - 6 - M3x6 screws
 - 6 - M3 nuts
 - 22 - 6x3mm magnets
 - Printed parts
-  
+
+### Side Panel (each)
+- 6 - M3x6 screws
+- 6 - M3 nuts
+- 28 - 6x3mm magnets
 ## Assembly instructions:
 
+### Front panel
 1. Remove front two feet from V0
 2. Preload 3 m3 nuts to each front extrusion
 3. Attach mounting plate to front of V0 with M3x6 screws
@@ -16,3 +22,12 @@ This mod comes in two parts, a fixed mounting plate which anchors to the v0 fram
 6. Insert magnets into the 11 holes on the panel mount, be sure to match polarity properly!
 7. Re-attach front two feet 
 
+### Side panels
+1. Remove side two feet from V0
+2. Preload 3 m3 nuts to each front extrusion
+3. Attach mounting plate to V0 with M3x6 screws
+4. Insert magnets into the 14 holes on the mounting plate
+5. Using VHB tape, affix clear acrlyic to the panel mount part
+6. Insert magnets into the 14 holes on the panel mount, be sure to match polarity properly!
+7. Re-attach two feet 
+