Add midspan clips to Magnetic_Panels mod (#427)

* Add Midspan Clips

* Delete Magnetic Panel Midspan Clips v1.f3d

* Change CAD file name

* Create readme.md

* Add files via upload

* Delete readme.md

* Add midspan STLs

* Update README.md

* Update README.md

* Update STL

* Delete Mid_Cap.stl

* Delete Mid_Mount.stl

* Update CAD

printer_mods/README.md

@@ -57,7 +57,7 @@ like so:
 |BlueBear|[Deck Panel Backpack](./BlueBear/Deck_Panel_Backpack)|A mounting alternative if you don't want to drill your deck panel | :heavy_check_mark: | :x: | :x: |:x:|
 ||[Clippable Wago 221 Mounts](./BlueBear/Wago_221_mount)|Mounts for Wago 221 to screw or clip-in on 1515 extrusions | :heavy_check_mark: | :x: | :x: |
 ||[Ziptie Mount](./BlueBear/Ziptie_Mount)|Clippable Ziptie hooks for 1515 extrusions| :heavy_check_mark: | :x: | :x: |
-| bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic corner clips to allow for easy removal and install of panels | :x: | :grey_question: | :heavy_check_mark: | :x: |
+| bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: |
 | btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount/README.md) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:|
 | buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:|
 ||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: |

printer_mods/bobbleheed/Magnetic_Panels/README.md

@@ -14,6 +14,19 @@ This mod allows for the easy removal of the panels on a V2, ideal for switching
   
 To reduce the number of magnets required, it is possible to install just two or even one per printed part. This has not been tested and the hold strength unknown.
 
+For larger builds or less rigid panels there are also midspan clips which can be used for additional support.
+<br>
+<br>
+BOM (per midspan clip)
+   | Material | Quantity |
+   |----------|----------|
+   | 6x3 Magnets | 4 |
+   | M3x8 SHCS | 1 |
+   | M3 Roll In or Hammerhead T Nuts | 1 |
+   | VHB Tape | | 
+<br>
+
+
 ### Assembly
 
 #### Mount Assembly 
@@ -35,3 +48,6 @@ Pressfit the magnets into the housing ensuring the poles are aligned between the
 ![Magnetic Mount Assembly](./IMAGES/Final_Assembly.png)
 
 The panel can now be pulled straight off the frame for removal, before being replaced with as much ease. 
+
+
+Repeat previous steps as required if fitting midspan clips.