Mounts for Terminal_Blocks NC933 SPL-62 (#285)

* Terminal_Blocks_NC933_SPL-62

Mounts for Terminal Blocks NC933 SPL-62 from AliExpress

* Removed space in directory

Removed space at the end of the directory name

* Update README.md

Changed text

* Update README.

Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>

printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/README.md

@@ -0,0 +1,25 @@
+# Mounts for Power Terminals from AliExpress
+
+### Overview
+I found those no-name power terminals on AliExpress and found them useful to distribute the power in the Voron.
+So I designed a mixup from the PSU DIN rail mounts for them.
+!! Use them at your own risk like any other electrical part in your printer. !!
+
+![no-name power terminals](IMG_2334.png)
+
+### Description
+These mounts fit for the SPL-62 and NC-933 1to3 power terminals that can be found at Electrician Electrical Store on AliExpress.
+I do like the compact design over the WAGO or Phoenix Contact terminals. They do have a strong clamping force, but I would not trust in the sellers specifications of 32 Amps. For the use in a Voron they should be fine.
+
+NC-933 (https://de.aliexpress.com/item/4001236902340.html)
+SPL-62 (https://de.aliexpress.com/item/4000505115328.html)
+
+* You can use two M2 self tapping screws to mount them
+* I recommend a stack of washers or a 3D printed spacer for the SPL-62 as the mount holes are not flat on the backside.
+
+Again, use them at your own risk. You should not work on mains voltage if you don't know what you're doing.
+And your printer should be properly protected by fuses, circuit breakers or even a ground fault circuit interrupter.
+If you have any concerns, don't use them, get genuine WAGO/Phoenix Contact instead!
+
+![no-name power terminals #1](IMG_2333.png)
+![no-name power terminals #2](IMG_2335.png)

printer_mods/README.md

@@ -78,6 +78,7 @@ like so:
 | |[Short Z Joints](./Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 |:x: |:x: |:heavy_check_mark: |:x:|
 | ElPoPo | [Removable Doors](./ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening  V2.x | :x: | :x: | :heavy_check_mark: | :x:|
 | Empusas | [Power Skirt 2.x FN284-10-06](./Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | :x: | :x: | :heavy_check_mark: | :x:|
+| | [Mounts for Terminal Blocks NC933 SPL-62](./Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question:|
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |:x:|
 | GiulianoM | [Fly F407ZG Mount](./GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | :x: | :x: | :heavy_check_mark: | :x: |
 | Gizzle | [Ender 3 and Ender 3 Pro Switchwire Mod](./Gizzle/ender-3_(pro)_switchwire)| Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. | :x: | :x: | :x: | :heavy_check_mark: |