New LED mount, exhaust filter housing and panel clip (#284)

* Update / add

added files

* edit

* edit: photos / links

* Update README.md

* edit pic

* Update README.md

* Create AngryLED_v1_3.png

* Update README.md

* update

* update pic

* -

* add pics

* edit photos

* Update README.md

* added other panel clips

* added AngryLED small

* correction

* update: overhang

* update

* update

* updated printability

printer_mods/42bios/LED_mount/README.md

@@ -1,7 +1,20 @@
 Simple LED-mount for [Lumentech LT3 profiles.](https://lumentec.eu/Aluminium-Eckig-LED-Profil-100cm-45-fuer-8-12mm-LED-Streifen-Profil-LT3-Abdeckung)<br>
-Mount with two M3x10 screws and T- or hammerhead nuts to normal 2020 extrusions.<br>
 Works with 8-12mm LED stripes<br>
 
-version: 0.1<br>
-![LED_mount1](./led_mount1.png)
-![LED_mount2](./led_mount2.png)
+v0.1 needs two M3x10 screws / set and T- or hammerhead nuts to mount on normal 2020 extrusions.<br>
+v1.0 "AngryLED"  needs two M3x20 screws / set and T- or hammerhead nuts to mount on normal 2020 extrusions.<br>
+ -> optimized cable path so that the cable goes into the extrusion nut
+ -> there is also a small version
+<br>
+<br>
+v0.1<br>
+![LED_mount_v01_1](./led_mount_v01_1.png)
+![LED_mount_v01_2](./led_mount_v01_2.png)
+<br>
+AngryLED v1.0<br>
+![AngryLED_v01_2](./AngryLED_v1_2.png)
+![AngryLED_v01_3](./AngryLED_v1_3.png)
+![AngryLED_v01_1](./AngryLED_v1_1.png)
+<br>
+AngryLED small v1.0<br>
+![AngryLED_s_v01_2](./AngryLED_small_v1.png)

printer_mods/42bios/corner_panel_clip_cable/README.md

@@ -0,0 +1,10 @@
+Corner panel clip with an internal cable path, so you can route the cables around the panel and corner.<br>
+I use them to mount 6mm floatglas as top panel with 3mm foamtape<br>
+<br>
+corner_panel_clip_top_4mm.stl is 4mm and corner_panel_clip_bottom_3_5mm.stl is 3.5mm height, <br>
+so at the end there is 7.5mm space for the panel and foamtape.<br>
+Needs 2x M3x12 screews to mount per clip.<br>
+
+![corner_panel_clip_cp_gif](./corner_panel_clip_cp.gif)
+![corner_panel_clip_cp](./corner_panel_clip_cp.png)
+![corner_panel_clip_cp2](./corner_panel_clip_cp2.png)

printer_mods/42bios/exhaust_filter_housing_side/README.md

@@ -0,0 +1,5 @@
+Exhaust filter housing with the G1-8" thread on the side.<br>
+Can also simply be printed mirrored to have the fitting on the opposite side.<br>
+<br>
+![exhaust_filter_housing_side_1](./efh_s_1.png)
+![exhaust_filter_housing_side_2](./efh_s_2.png)

printer_mods/README.md

@@ -25,8 +25,10 @@ like so:
 
 | Creator | Mod title | Description | V0 | V1.8 | V2.4 | VSW |
 | --- | --- | --- | --- | --- | --- | --- |
-|42bios|[LED mount](./42bios/LED_mount)|LED-mount for Lumentech LT3 profiles. |:x:|:grey_question:|:heavy_check_mark:|:x:|
-||[relay mount](./42bios/relay_mount)|relay-mount for 2x 2 channel relay modules.|:x:|:grey_question:|:heavy_check_mark:|:x:|
+|42bios|[Corner panel clip w. cable](./42bios/corner_panel_clip_cable)| Corner panel clip with an internal cable path. |:x:|:grey_question:|:heavy_check_mark:|:x:|
+| |[Exhaust filter housing - side thread](./42bios/exhaust_filter_housing_side)|Exhaust filter housing with the G1-8 "thread on the side. |:x:|:grey_question:|:heavy_check_mark:|:x:|
+| |[LED mount](./42bios/LED_mount)|AngryLED - LED-mount for Lumentech LT3 profiles. |:x:|:grey_question:|:heavy_check_mark:|:x:|
+| |[relay mount](./42bios/relay_mount)|relay-mount for 2x 2 channel relay modules.|:x:|:grey_question:|:heavy_check_mark:|:x:|
 |aeresov|[TL filament sensor bracket](./aeresov/TL_filament_sensor_bracket)|A bracket for TL filament sensor to mount near stock spool holder. |:x:|:grey_question:|:heavy_check_mark:|:x:|
 ||[MeanWell UHP-xxx DIN mount](./aeresov/MeanWell_UHP_DIN_mount)|A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails.|:x:|:grey_question:|:heavy_check_mark:|
 ||[Raspberry Pi DIN mount](./aeresov/Raspberry_Pi_DIN_mount)|A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|