zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 

* Create readme.md

* Add files via upload

* Update README.md

* Update README.md

* Create Readme.md

* Add files via upload

* Update Readme.md

* Update README.md

* Update Readme.md

Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.

* Add files via upload
This commit is contained in:
lococnc 2021-05-22 16:12:10 -05:00 committed by GitHub
parent acf36c5a63
commit f6a9645834
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Front_and_Rear_Midclip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Left_and_Right_Midclip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

2
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Readme.md Normal file
View File

@ -0,0 +1,2 @@
Printed Solid sells 1.8" (3mm+), these do not work with the spec parts. I modifed all the "clamps" to accommodate 1.5mm extra (you can then shim as needed, I did not have to after carefully deburring all parts)
Printed and Tested! Makes the assembly actually fit on the printer as intended perfectly.

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

BIN
printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl Normal file
View File

Binary file not shown.

1
printer_mods/README.md
View File

@ -134,6 +134,7 @@ like so:
|littleferris |[V0 c14 Skirt Inlet](./littleferris/V0_Skirt_Inlet) |V0 C14 Skirt inlet |:heavy_check_mark: |:x: |:x: |:x:|
|LoCoCNC| [MGN7H Shims](./LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar |:heavy_check_mark:|:x:|:x:|:x:|
| | [Mosquito PTFE 15mm Tube Cutting Jig](./LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube |:heavy_check_mark:|:x:|:x:|:x:|
| | [3mm Top Hat Panels Clips](./LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 |:heavy_check_mark:|:x:|:x:|:x:|
|Long| [Mantis Dual 5015 Toolhead](./Long/Mantis_Dual_5015) | v2.4 MGN12 Dual 5015 Toolhead |:x:|:x:|:heavy_check_mark:|:x:|
|madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
|MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |:x:|