82cc979749
Revo skirt nozzle holder ( #786 )
...
* Initial mod commit
* Update README.md
* Fixed image paths
* Update README.md
* Update README.md
* Update README.md
* Prepare for pull request
Modified file names, formats, and STL orientation to comply with pull request requirements.
* Add space after username per PR
* Formatting corrections per PR comments
* Rename STL
* Add files via upload
* Remove spaces from image names
* Add renamed image files
* Fix image references
* Correct ordering of table
* Convert to relative link
2022-09-23 11:37:00 -04:00
d58e668481
Resubmission for Stealth Zero ( #798 )
...
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete printer_mods/MasturMynd/Stealth Zero directory
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Corrected Spelling
Toolless was misspelled. Correcting to resolve pending pull request.
* Updated belt path to match modified x carriage
2022-09-23 11:33:53 -04:00
ab166cdf33
updated .dxf file ( #814 )
...
* Add files via upload
* Delete back_panel_dxf.dxf
* Delete back_panel.dxf
* Add files via upload
Was missing 73mm hole in DXF file for fan, cleaned up file name too
2022-09-10 19:42:27 -04:00
d2ed5ffdf7
Bowden tube Guide ( #808 )
...
* Create Readme.md
* Add files via upload
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Delete Long-Arm.f3d
* Delete Long_Arm.step
* Add files via upload
* Delete Mount.f3d
* Delete Mount.step
* Delete Short_Arm.f3d
* Delete Short_Arm.step
2022-09-10 19:40:27 -04:00
ad3b6e1f34
Stealthburner + CW2 Toolhead for Dragon Volcano hotend ( #797 )
...
* Add crazy dragon mod
* update preview images
* Add to the top level readme
* update compatibility check
* Update readme
* Update top level readme
2022-08-30 11:43:12 -04:00
c9fb351f70
z idler corner cable cover with drop holes and inline hole cutouts ( #785 )
...
* Create README.md
* Create README.md
* Create top_corner_cable_cover_with_drop_holes.f3d
* Add files via upload
* Create top_corner_cable_cover_with_drop_holes.stl
* Add files via upload
* Create top_corner_cable_cover_with_drop_holes_bottom.JPG
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* modified fastener head support on CS holes
* modified fastener head support on CS holes
* Delete README.md
* update CS hole support
* Delete top_corner_cable_cover_with_drop_holes.f3d
* updated CS hole support
* Corner cable cover with drop holes
* Corner cable cover with drop holes
* Corner Cable Cover with Drop Holes
2022-08-29 19:17:36 -04:00
7ec33bf541
Plug panel mod for Schurter CD44.1101.151 ( #774 )
...
* Added files for Schurter plug panel mod
* Added more images for Schurter plug panel mod
* Updated README.md with the Schurter plug panel mod description
* Added CAD file for Schurter plug panel mod
* Removed necessity of support for plug panel mod
* Update of readme for Schurter plug panel
* updated image for Schurter plug panel mod printed
* minor update of CAD and STL for Schurter plug panel mod
* fixed typos in Schurter plug panel readme
* added 2.4r1 compatibility comment in Schurter plug panel mod readme
2022-08-29 18:41:57 -04:00
1642dbbb61
Slitte mods ( #750 )
...
* Create file.txt
* Create test.txt
* Create readme.md
* Create readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Delete file.txt
* Create licence
* Create licence.md
* Create readme.md
* Add files via upload
* Delete test.txt
* Create readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Update readme.md
* Update README.md
* Delete licence.md
* Delete licence
* Update readme.md
* Update readme.md
* Delete readme.md
* Delete readme.md
* Delete readme.md
* Delete readme.md
* Delete readme.md
* Delete readme.md
* Update readme.md
* Update readme.md
* Delete ssd_bracket.STL
* Create readme.md
* Add files via upload
* Delete readme.md
2022-08-25 04:42:45 -04:00
12f5cb860a
Runout unklicky ( #781 )
...
* Runout UnKlicky Sensor
* Update runoutunklicky.cfg
* Updated Docs and sample macros
2022-08-16 13:24:34 -04:00
e97a8b2993
update readmed / add information about stealthburner umbilical cover ( #780 )
...
* add rear umbilical mod
* Update README.md
* Update README.md
* update folder structure
* Create Rear_Umbilical.step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
initial commit was wrong (1.8) mod is only confirmed by me to work with 2.4
* Update README.md
add information about dustinspeed's Stealthburner umbilical cover
Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
2022-08-16 13:20:19 -04:00
063f72ccb7
Reworked sketch to resolve in Fusion 360, re-exported ( #775 )
...
* Reworked sketch to resolve in Fusion 360, re-exported fixing some incorrect sizes
* Fix english
2022-08-16 13:18:16 -04:00
6d82d64565
Display Case Front Cover that supports SSD1306 Display ( #771 )
...
* Add SSD1306_Case_Front_Cover Mod
* Add newlines
* Fix order and orientation
* Add SSD1306_Case_Front_Cover Mod
* Add newlines
* Fix order and orientation
* Add STL and STEP
* Remove 3mf, fix wording
Signed-off-by: Lukas <lukas_sturm@yahoo.de>
Signed-off-by: Lukas <lukas_sturm@yahoo.de>
2022-08-16 13:07:40 -04:00
faf53e4a5b
Tool-free tensioner for Z-Axis on Voron 2.4 ( #767 )
...
* Tool-free tensioner for Z-Axis
* update .step
2022-08-16 12:55:57 -04:00
c97b90fc41
Revo Nozzle in-skirt container for the Voron 2.4 all Sizes ( #753 )
...
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* fixed undersized holes
* Add files via upload
* New images
* Update README.md
* Delete Revo Nozzle Holder V1.step
* Add files via upload
* Add files via upload
* Updated inserts to include backstop
* Add files via upload
* Moved screw hole to fix clearance issues
* Added 5 nozzle hole
* Delete side_skirt_a_250_revo.stl
* Delete side_skirt_a_300_revo.stl
* Delete side_skirt_a_350_revo.stl
* Add files via upload
Added Voron 2.4 R1 files for lazy people who don't want to update and fixed R2 version
* Delete Revo Nozzle v8.step
* Add files via upload
* Update README.md
* Delete Revo Nozzle v11.step
* Delete Revo Nozzle v8.step
* Add files via upload
Updated to latest step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete CAD directory
Wrong directory location
* Add files via upload
Fixed spacing as requested
2022-08-16 12:50:58 -04:00
c8b48dea98
V0 Two Piece back panel with vents ( #756 )
...
* Create README.md
* Create README.md
* Create README.md
* Delete printer_mods/Polar-Ted/STL directory
* Create README.md
* Create README.md
* Add files via upload
* Update README.md
* Add files via upload
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete README.md
* Delete README.md
* Delete README.md
* Delete README.md
2022-08-16 12:50:35 -04:00
bc9b8732c6
Nozzle wiper by chirpy ( #759 )
...
* NozzleWiper Mod
* Update README.md
* Fixed position in README.md
* Removed tracking from AliExpress URLs
* Doc and config updates
Removed LICENSE.TXT file
Modifications to klipper configuration to use nonsense default values to force the user to configure it appropriately
* Update nozzlewiper.cfg
Spelling Fix
* Improved printability and naming of parts
* Fixed printability issues
* Added mark for Trident
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2022-08-16 12:47:47 -04:00
3f893c2f98
Magnetic Panels with Magnet Inserts ( #736 )
...
* Create README.md
* Create README.md
* Create README.md
* Adding STLs
Adding STLs for corner and mid panel clips in 4mm and 6mm variations, magnet inserts and unhammer, installation jig.
* Delete README.md
* Delete README.md
* Adding README.md content
Description and photos.
* Create README.md
* Adding images
* Create README.md
* Create README.md
* Update README.md
Initial content with description and images
* Create README.md
* Create README.md
* Adding images for Magnetic Panel mod
* Update README.md
* Adding STLs for Magnetic Panels with Magnet Inserts
* Delete printer_mods/Le0n/OV5648 Mount directory
* Delete README.md
* Create README.md
* Add files via upload
* Delete README.md
* Adding Le0n/Magnetic_Panels_with_Magnet_Inserts
* Delete printer_mods/leang directory
* Update README.md
* Upated STL and README
Added Magnet-Insert-Side.stl for easier printing.
* Update README.md
* Add files via upload
Adding slightly taller variant.
* Renaming file for consistency
Renaming file for consistency
* Delete README.md
2022-08-16 12:42:57 -04:00
1c2e7dea62
Mantis Update ( #742 )
...
* Update readme.md
* Duct Bracing
Helps with the resonance graphs (attenuates the ~125hz peak)
* Delete Duct_Brace_v1.0.stl
* Update readme.md
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Dragon directory
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Rapido_Crazy_Volcano directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano directory
5015s come in many sizes, this accounts for the 5015s that are slightly larger (~51mm instead of 50mm diameter)
* Add files via upload
5015s come in many sizes, this accounts for the 5015s that are slightly larger (~51mm instead of 50mm diameter)
* Add files via upload
* Update readme.md
* clarification
* Update readme.md
* Update readme.md
* Delete Duct_Brace_Upper_Only_v1.0.stl
* Add files via upload
* Add files via upload
* Delete Duct_Brace_Rapido_Crazy_Volcano_Full_v1.1_Closed_Mount.stl
* Delete Duct_Brace_Rapido_Crazy_Volcano_Full_v1.1_Open_Mount.stl
* Slotted back clamp hole. All 5015s are not 50mm.
allows adjustability in where the clamp sits. all 5015s are not 50mm diameter.
* Delete Duct_Brace_Dragon_Full_v1.0_Closed_Mount.stl
* Delete Duct_Brace_Dragon_Full_v1.0a_Open_Mount.stl
* added slots to account for different 5015 sizes
* Update readme.md
* more airflow, less buildplate clearance
* add info on duct 1.043e for Dragon and Mosquito
* Update readme.md
* Update carriage_assembly.md
* Hotend Mount with Brace for Sherpa
Hotend mount which adds a spot to triangulate the sherpa mini mounting at the front. Uses modified sherpa mini housing_front
* Update readme.md
* Add files via upload
* Update readme.md
* added sherpa front brace info
Hotend_Mount_Dragon_v1.040_sherpa_brace.stl allows usage of a modded front housing for the sherpa mini which triangulates the sherpa mini mounting for added stability.
* pics for modified hotend mount/sherpa bracing
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete Mantis_MGN12_v1.041.step
* Delete Mantis_MGN12_Dragon_v1.043e.step
* 1.041 and 1.043 ducts and hotend mounts with brace
* Delete Mantis_MGN12_CrazyVolcano_v1.0.step
* updated to include brace.
* deleting files to update
* updated CADs. Combined Some and added Brace
* Update readme.md
* repaired STL
* add cads
2022-08-16 12:41:33 -04:00
4b4192dc82
remove Spider DIN mount in favor of the Trident version ( #627 )
...
* folks can now use the Trident mounts for the Spider board
* use stl permalink
2022-08-16 12:38:23 -04:00
c571aae76e
Added Image ( #642 )
...
* Update README.md
Added MakeALeft to table
* Clean Front Middle Grill for Switchwire
* Delete front_mid_grill_no_magnets.stl
* Switchwire Clean Front Middle Grill
* missed Trident not supported X
* Installation note added
* fixed last change
* Update README.md
* Create CleanGrill.jpg
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Delete SW Grill v2.step
* Add files via upload
* Delete SW_Grill_v2.step
* Add files via upload
2022-08-16 12:37:36 -04:00
1d4225f99d
Adding my Switchwire mods. Side spool holder parts and panel jig. ( #777 )
...
* Adding my Switchwire mods. Side spool holder parts and panel jig.
* Added forgotten README.md.
2022-08-02 20:50:02 -04:00
5377889497
Skirt-mounted power switch for 2.4 ( #760 )
...
* Skirt-mounted power switch for 2.4
* Fixed a typo
* Fixed headings in readme
2022-07-24 08:41:46 -04:00
0d566b8b12
nice handle for Voron 2.4 ( #764 )
...
* add Voron 2.4 handle mod
* fixed typo for check mark
* fixed typos
* add STEP export of 3D model
* renamed STL file to conform to Voron naming conventions for accent colors
* STL mesh repaired
Co-authored-by: Lutz Dittrich <lutz.dittrich@i-gos.de>
2022-07-24 08:35:12 -04:00
55921dc9ec
New mod C17-EXT and C17-EXT-CARTRIDGE ( #730 )
...
* Create Readme.md
* Update Readme.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Create Readme.md
* Create Readme.md
* Add files via upload
* Create Readme.md
* Add files via upload
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Create Readme.md
* Create Readme.md
* Add files via upload
* Delete Readme.md
* Create Readme.md
* Add files via upload
* Delete Readme.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update README.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Delete Readme.md
* Delete Readme.md
* Delete readme.md
* Delete Readme.md
* Delete Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
Strange I don't see the fifth column in my browser, I have corrected
* Update Readme.md
Done, remove tracking
* Update README.md
Last
* Add files via upload
STL flip
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Create readme.md
* Add files via upload
* Create Readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Delete LICENSE.html
* Delete LICENSE.html
* Delete readme.md
* Delete C17-EXT-CARTRIDGE.f3d
* Delete C17-EXT.f3d
* Delete Readme.md
2022-07-24 08:34:56 -04:00
b20b7b7a64
[filenames] Standardize file naming for some accent parts ( #752 )
...
* Add '_' after [a] if missing
ie. `sed -E 's/(\[a\])([a-zA-Z0-9])/\1_\2/g'`
* As these are accent parts, name them as such
2022-07-24 08:29:40 -04:00
59d0c6965c
Bigtreetech U2C Mounting Bracket ( #766 )
...
* U2C Mounting Commit
Commit of U2C Mouting Bracket
* Update README.md
* Delete U2C_Mounting.PNG
* Update README.md
* Update to include Instructions for V0
2022-07-20 11:24:42 -04:00
6f2e2f01e9
Tip tophat by chirpy ( #755 )
...
* TipTophat
* Update README.md
* TipTophat added STEP
* Update README.md
* Updated Body Quarters and STEP file
* Updated Body Quarters
* Repaired STL files
2022-07-20 11:22:36 -04:00
35f97709fc
Add Revo Nozzle Skirt ( #751 )
2022-07-20 11:22:02 -04:00
1136648f2a
VEFACH - Voron Exhaust Filter Activated Coal + Hepa ( #763 )
...
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* Add files via upload
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
2022-07-18 17:52:20 -04:00
c683a9b1bb
[V0.1_Movable_Pulley_Z] Update the upper parts ( #765 )
2022-07-18 17:50:44 -04:00
fe25261736
Clip on door frame 350mm ( #743 )
...
* Update README.md
* Rename .stls to prepare for addition of 350mm files.
* Add 350mm .stl files.
* Update readme.
* Add 250mm versions, fix 300mm angle.
* Update README.md
Remove reference to missing 250mm version.
* Add .step files.
* Fix print orientation.
2022-07-17 17:11:04 -04:00
de620ad469
Combo inlet fit update ( #745 )
...
* Added width to opening
* Updated CAD files
* Delete Trident_2.4_ComboInlet_v3.f3d
* Delete Trident_2.4_ComboInlet_v3.step
* Add files via upload
* Add files via upload
* Delete Trident_2.4_ComboInletSkirt_v6.f3d
* Delete Trident_2.4_ComboInletSkirt_v6.step
* Add files via upload
2022-07-17 16:39:58 -04:00
720e266170
Updated README.md file ( #744 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
* Update README.md
Added information about how to use the Rainbow Barf on Klipper using the main repo, and how to mix it with the nozzle RGBW LEDs.
* Update README.md
Added warning concerning JLCPCB not providing the WS2812B-2020 LEDs anymore.
* Update README.md
Added an entry on the 'Updates' section.
2022-07-17 16:22:40 -04:00
1283f5f49d
Add Monster8 heatsert mount ( #746 )
...
- Can print 2x on V0 bed with no issue
- Uses heatsets
- Fits Monster8 V1 and V2
2022-06-22 05:10:06 -04:00
56b234fdc3
Door update ( #739 )
...
* Simplify to a single fusion file.
Update all the DXF to new v2.4R2 dimensions (1mm smaller across both dimensions)
Update README with details
Add new screenshot to show how to save DXF files from Fusion
* fix table formatting
* fix CAD link
2022-06-05 11:58:43 -04:00
aac299cb7e
Lgx lite side can board mount ( #737 )
...
* LGX Lite Side Mount
* Readme tweaks
2022-06-05 11:54:11 -04:00
55263c68db
Add DIN rail bracket for OrangePi 3 LTS ( #729 )
...
* Add DIN rail mount for OrangePi 3 LTS
* Fix orientation of parts.
2022-06-05 11:38:04 -04:00
e238ec3c02
Trident Internal Filament Spool Holder ( #719 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
* Create Readme
* Create README
* Added new STLs
Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame
* Update README.md
* Create README.md
* Update README.md
* Update README.md
* Create README.md
* Initial Release STL Upload
* Create README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2022-05-26 07:40:49 -04:00
3796f238c1
Adding RevoVoron Support ( #735 )
...
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
* added REVO_VORON and removed slice announcement
Its been a year, I don't need to keep the slice announcement in there
2022-05-26 07:39:06 -04:00
3b151667a5
restarted pull request for flush and overlapping profile covers ( #733 )
2022-05-23 14:52:59 -04:00
921360d085
Added step files where missing, remove files that were added to TridentR1 and added a few more mods frequesntly requested. ( #732 )
2022-05-23 13:43:48 -04:00
d839c6f6af
MKS CANable DIN Mount ( #728 )
...
* canablepro
* Delete canable_pro_cad.JPG
* Create canable_pro_cad.jpg
2022-05-21 10:26:59 -04:00
f2caa290f1
Addition of my Mod PiTFT Mount ( #720 )
...
* Added PiTFT Mount
Added PiTFT Mount
* Update readme.md
* Create STL
* Add files via upload
* Delete STL
* Create readme.md
* Added STL files
* Delete [a]_display_mount_x2.stl
* Delete display_middle_skirt.stl
* Delete pitft70_housing_front.stl
* Delete pitft70_housing_rear.stl
* Create placeholder.md
* Added Some Pictures
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/Pictures directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Display_Far.jpg
* Delete Display_Close.jpg
* Add files via upload
* Update readme.md
* Added Pictures and updated Instructions
* Update readme.md
* Added Printing Instructions
* Add files via upload
* Update readme.md
* Update readme.md
* Added my Entry in the List
* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/SLT directory
* Add files via upload
2022-05-21 10:25:42 -04:00
44dacde39c
Create README.md ( #709 )
...
* Create README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete README.md
* Create README.md
* Add files via upload
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
Order correction
2022-05-21 10:25:22 -04:00
203c5a62b1
RockNRoll-Mod ( #615 )
...
* Create README.md
* Update README.md
Added M3x20 to BOM
* Update README.md
* Add files via upload
uploaded STLs
* add CAD data and folder structure
* Update README.md
* Update README.md
* Update README.md
* uploaded pictures
* Create support_03.jpg
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed STEP and STLs
* renamed STLs
* changed hole design of brace screw hole
Thanks barthini for the idea!
* added images
* Update README.md
* changed M3 screw length and renamed project
* added assembly instructions and pictures
* Update assembly_base_plates_01.jpg
* Update README.md
* removed image
* added mod to modlist
* Update README.md
* Update README.md
* added supports and compatibility to 2.4r2
added base plates with forks for the rockers compatible with the new r2 feet. Also added in-model-supports to support the holes over the overhang for the rear panel. As requested by user ✪Runanaツ#3906 I added a version for 6mm thick panels (including foam tape).
* Updated the README and pictures to encorporate the recent changes.
* Update README.md
* Add additional support to shorten bridging
also removed supports entirely in CAD data
* Delete Thumbs.db
removed Thumbs.db - thanks Windows
2022-05-21 10:25:04 -04:00
191eca4484
fix alphabetical ordering issue. ( #731 )
2022-05-19 11:37:30 -04:00
0229a0fa06
update readme.md ( #724 )
...
* add rear umbilical mod
* Update README.md
* Update README.md
* update folder structure
* Create Rear_Umbilical.step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
initial commit was wrong (1.8) mod is only confirmed by me to work with 2.4
Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
2022-05-19 11:00:14 -04:00
0db2e68db2
PCB/CAN Mount Adaptor ( #722 )
2022-05-19 10:59:29 -04:00
ef0aecfc7d
AngryCAM USB V2.0 Update ( #718 )
...
* AngryCAM USB V2 Update
* corrected Readme.md, due to missing content
* removed redundant image and updated ReadMe.md
* updated ReadMe.md with more details on V2 and re-added V1 pictures for history reasons
* remove typos from ReadMe.md and updated/added some images
* Final changes to ReadMe.md
* bugfix #1 : corrected length of used M3 SHCS screw in ReadMe.md to M3x20
* bugfix 1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20
2022-05-19 10:57:27 -04:00
38d475bbd8
V2.4r2 Z-Drive Motor Tensioner Mod base plates ( #707 )
...
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
Only the baseplate has changed.
* Moved the whole mod to the "abandoned_mods" folder.
* Update README.md
* Update [a]_2.4_base_plate_b_mod_x2.stl
* added the change log section
* Fixed Link
* Fixed Link
2022-05-10 10:14:06 -04:00
f377353ae0
add rear umbilical + y endstop relocation mod ( #704 )
...
* add rear umbilical mod
* Update README.md
* Update README.md
* update folder structure
* Create Rear_Umbilical.step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
2022-05-09 18:32:00 -04:00
8f1d3f9a35
Updated PCB, solve need for inline resistor for impedance matching ( #716 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
2022-05-09 14:24:33 -04:00
d515bf02b0
Added bed holder for kirigami bed ( #713 )
2022-05-09 14:11:31 -04:00
1ac2fb06ed
Horseshoe spool holder ( #712 )
...
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
2022-05-09 14:06:45 -04:00
a109b9af81
Add part numbers for inlet parts. ( #710 )
2022-05-09 14:00:07 -04:00
339b14cd11
Abandoned mods ( #700 )
...
* fix order in readme.md
* move purge bucket mod to abandoned mods
* update readme.md for abandoned mods.
* Fix broken link to abandoned mod.
* fix broken link to mod *for real this time*
* Fix typo in readme
2022-05-07 09:15:38 -04:00
64260d6916
SB+CW1+PCB Cover Added ( #663 )
...
* SB+CW1+PCB Cover Added
Added a low-poly style cover for users that are still rocking the Clockwork1 and PCB with Stealthburner. This should be compatible with ERCF and Hartk style PCBs.
* Update README.md
* Update README.md
* Fixed empty STP
Fixed the STP file which was empty for some reason and hopefully corrected the merge issues with the main readme.md
* Fixed formatting on mods README.md
* Update README.md
2022-05-02 22:44:52 -04:00
0461850f78
4.3 Fly Screen Mount ( #705 )
...
* 4.3 Fly Screen Mount
* removed a couple of files and updated STL orientation
2022-04-26 13:14:20 -04:00
2f8760c06e
Pull-out_electrical_store for Voron 2.4 ( #690 )
...
* Add files via upload
* Delete printer_mods/ZZP8202/Pull-out_electrical_store directory
* Pull-out_electrical_store
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* update
* Delete Guide_rail_C-SR36Y18.stp
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* update 3d
* Create README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* update 3D
* update drawing
* upload photo
* upload photo
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* change name
* Create fan_balnk_X2.STL
* Delete fan_balnk_X2.STL
* Create Fan_decorative_panel_X2.STL
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Delete Voron_V2.4_Pull-out_electrical_store.SLDASM
* Create Voron_V2.4_Pull-out_electrical_store.STEP
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Create STEEL_CORNER_LBSB6-2020_X8.pdf
* Delete STEEL CORNER_LBSB6-2020_X8.pdf
2022-04-26 13:13:58 -04:00
4142122e55
VEFACH - Voron Exhaust Filter Activated Coal + Hepa ( #706 )
...
* Update README.md
* Add files via upload
* Create Readme.md
* Create Readme.md
* Add files via upload
* Add files via upload
* Delete 0_filterdummy_dont_print.stl
* Delete 1_coal_for_infill_mesh.stl
* Delete 1_coal_with_mesh.stl
* Delete 1_hepa.stl
* Delete 1_lid.stl
* Rename stlcad.md to Readme.md
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* Update README.md
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
2022-04-26 13:13:19 -04:00
ad9dcb3ace
Combo inlet ( #708 )
...
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
2022-04-26 13:08:38 -04:00
c44511f856
Adding Z Locks ( #703 )
...
* adding z locks
* updated z lock readme
* updated main readme
* updated exports
2022-04-23 10:44:51 -04:00
16353a785d
3dpandme mods ( #676 )
...
* Add thermistor holder zero
* Add fannypack zero
* Update to level readme
* Add cad for fannypack
* Add dxf for fannypack zero
* orientate fannypack zero for printing
* fixed readme links
* Fixed missing section that I didn't push
* Added non affiliate links
* Fixed last affiliate link
* Update README.md
Co-authored-by: rr-david <david@rivelinrobotics.com>
2022-04-23 10:44:10 -04:00
e836a31b10
Clip on door frame ( #628 )
...
* Initial commit.
* Upload STLs, images, and update readme.
* Add photos to readme.
* Update README.md
* Update README.md
* Update README.md
* Delete extended_door_latch.stl
* Rename extended__door_latch
* Update README.md
* Correct typo.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2022-04-23 10:23:23 -04:00
51274cec36
Door panels ( #686 )
...
* Creation (from prior attempt) of a laser-cut door panel for 2.4
* add stuff to master readme
* Update README.md
Change the links to relative links per request
2022-04-21 18:18:54 -04:00
72ddd62140
[V0.1_Movable_Pulley_Z] Redesign upper parts ( #697 )
2022-04-21 17:47:32 -04:00
0ed572f147
update to latest version ( #698 )
...
* update to latest version
* crop picture
2022-04-21 17:44:49 -04:00
78b16e37b4
WagoMounts mod ( #695 )
...
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Add files via upload
* Delete Wago_221-41x_Extrusion_&_Thin_Din_Mount.f3d
* Delete Wago_221-41x_Extrusion_&_Thin_Din_Mount.step
* Delete Wago_3x_221-41x_Angled_Din_Rail_Mount.f3d
* Delete Wago_3x_221-41x_Angled_Din_Rail_Mount.step
* Create README.md
2022-04-21 17:38:10 -04:00
d340bd97fd
fix order in readme.md ( #699 )
2022-04-20 13:51:55 -04:00
f64c79319b
Johanncc ( #678 )
...
* Added entry and files for the Raspberry Pi Camera Mount
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Adjusted naming convention of files to remove spaces
* Added the flex cable requirements
* Minor fix to README.md
* Minor fix to README.md
2022-04-18 16:42:13 -04:00
7ea4c4d483
Minor updates for Trident Inverted Electronics - added rear Z stepper mount for easier plate insertion. ( #692 )
...
* Add files via upload
* Add files via upload
* Delete printer_mods/LoganFraser/TridentInvertedElectronics directory
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update README.md
* Add files via upload
* Delete Trident_r2_Inverted_Electronics_v2.f3d
* Delete Trident_r2_Inverted_Electronics_v2.step
2022-04-17 06:55:24 -04:00
a243b64f87
Added new STLs for spool holder variations ( #679 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
* Create Readme
* Create README
* Added new STLs
Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame
* Update README.md
2022-04-16 19:37:11 -04:00
5359cf570d
PiPlate Skirt mod and raspberry pi mount --- Trident Inverted Electronics mod ( #688 )
...
* Add files via upload
* Add files via upload
* Delete printer_mods/LoganFraser/TridentInvertedElectronics directory
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update README.md
2022-04-16 19:36:17 -04:00
d8f6b1ecc2
printer_mods/Mini_After-LGX-Lite ( #623 )
...
* Mini_After-LGX-Lite
Mini_After-LGX-Lite
* Update README
Update README
* Update README.md
Updated README.md
* Update README
Update README
* adj print orientation
adj print orientation
* Delete printer_mods\Mini_After-LGX-Lite folder
* Renamed folder, removed spaces
* Adj STL orientation
* repaired mesh, added revo versions
* Delete x-carriage.stl
* Update README.md
2022-04-14 09:56:16 -04:00
18c7940976
Added 2-hole version, added STEP files to comply with new requirements ( #681 )
2022-04-11 14:32:54 -04:00
282eadbe6b
A remake of ryandam's Mod for an easy centered cable management ( #651 )
...
* Create Center_cable_management_duct
A remake of ryandam's Mod for a centered cable management.
I reinforced the slots to make it more robust.
* Add files via upload
* Update README.txt
* Delete printer_mods/davidauvergne/Pictures directory
* Add files via upload
* Delete printer_mods/davidauvergne/Pictures directory
* Add files via upload
* Update README.txt
* Update README.txt
* Delete CableDuct_Body_50X208mm_hole.stl
* Delete CableDuct_Body_50X208mm_no_hole.stl
* Delete cover_duct_50x208.stl
* Add files via upload
* Add files via upload
* Delete Center_cable_management_duct
* Update README.txt
* Create Center_cable_management_duct
* Update README.md
* Update README.md
* Update README.txt
* Update README.md
* Update README.md
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-04-10 14:39:57 -04:00
3384caf830
6mm slot cover ( #576 )
...
* 6mm slot cover
Simple cover for extrusions with 6mm slot width to prevent intrusion of dust and leaked fused filamet
* update
* update
* Delete slot_cover.3mf
* Delete slot_cover_one_side.3mf
* Update README.md
* Update README.md
Moved at the bottom of the file as required
* Update README.md
Moved under the following line:
| | LGX Lite toolhead PCB mount | Mount for Hartk's toolhead PCB(s) for LGX Lite | ❌ | ✔️ | ✔️ | ✔️ | ✔️ |
2022-04-10 10:57:08 -04:00
2854c7afbe
V2.4-Trident-Spool-Holders ( #620 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
2022-04-08 17:59:20 -04:00
3d7aeb5b8c
Belt tension helper for V0.1 ( #609 )
...
* Create readme.md
* Create readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Create readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
* Delete belttool-btm_v2.3mf
delete per request from Voron team
* Delete belttool-top_v2.3mf
delete per request from Voron team
* updated orientation
2022-04-08 10:48:09 -04:00
efaecd26f8
Add my mods to user mods directory ( #611 )
...
* Create readme.md
* Add files via upload
* Delete printer_mods/Hobson318 directory
* Create readme.md
* Add files via upload
* Create readme.md
* Update readme.md
* Add files via upload
* https://github.com/Hobson318/VoronUsers/tree/master/printer_mods/Hobson318/Belt_Tension_Wrench
* Add files via upload
* Update README.md
* Add files via upload
* Delete Tool 2.jpg
* Rename belt wrench v4.step to belt_wrench_v4.step
* Rename STM32_Klipper_Expander No Holes v2.step to STM32_Klipper_Expander_No_Holes_v2.step
* Rename STM32_Klipper_Expander v5.step to STM32_Klipper_Expander_v5.step
* Delete readme.md
* Delete readme.md
2022-04-06 21:49:05 -04:00
d5b492175f
Fix skirt_a_350 for the Display mount 5inch ( #616 )
...
* Fix skirt_a_350
Fix mirroring for the skirt_a_350.
* Repair stl
Repair stl
2022-04-06 21:45:43 -04:00
8b445ae57e
Add PITFT50 45-degree mount ( #677 )
...
* Add PITFT50 45-degree mount
* typo
* Use relative links
2022-04-06 21:38:37 -04:00
f7ac2039c7
Voron 1.x/2.x hepa filter exhaust ( #625 )
...
* Inital Upload
1. Contrains rough draft of Readme.md. Will provide updates with Images soon.
2. Added images directory with some images of the build.
3. Added STL directory with all printed parts.
* added note about the nevermore micro.
updated readme with note about coupling this exhaust filter with the nevermore micro.
* Update README.md
minor update to improve wording.
* Update README.md
fixed heading formatting.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed project directory, updated mods README
updated printer_mods readme.
renamed HEPA filter directry to remove spaces.
* added image of filter
* Update README.md
Modified instructions to inlcude steps for mounting to the chamber.
* Changes requested by cbc02009
* removed ref from Amazon links.
* reordered dePrintinator in printer_mods README.md
* fixed non-manifold geometry issue in lid
Fixed, hopefully should pass the CI process now.
2022-04-06 08:11:16 -04:00
8f3bf42e71
Bracket for Octopus (PRO) Boards ( #568 )
...
* Create README.md
* created and uploaded all files
* updated readme.md's
* updated readme.md
* updated README.md
* update
* Updated printer_mods/README.md
* Updated printer_mods/README.md, corrected typos and namechanges in mod README.md
* stl repair
2022-04-06 08:10:47 -04:00
2e52c1c72c
Mathematical potato ( #622 )
...
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* V0 Belted Z Revisions
Updated bed mount to have better grip on belt teeth
* Update V0-ZBelt-KirigamiBed_body.stl
revised body
* Updated Repo
Removed problem CAD files
* Re-commit
attempt to fix problem stl
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
2022-04-05 13:18:42 -04:00
01d4189ab7
Fixed problem with mirrored logo on z_belt_cover_b. Now the logo has … …the correct orientation. ( #617 )
2022-04-04 19:05:11 -04:00
8bbca2d0d0
Add Trident Parts Design Logo and correct Typos in README files ( #646 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
* Initial comit
* Update README file
* Update README
* Update README
* Update README
* update main README
* update main README
* fix missing ')' on footnote 1
* Update README
* Inital Commit for Octopus V1.1 Color PIN Diagram
* Update README file
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Add footnote about MOTOR_PWR_IN Fuse if >24V used
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_Pro_V1.0_Color_PIN_Diagram directory
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_V1.1_Color_PIN_Diagram directory
* Shorten filename
* Update README
* update README
* Update README
* update README
* update README
* update README
* update README
* update README
* update README
* Update README
* update README
* update README
* Shoten Filenames
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update Voron 0.1 design
* Add Trident Parts Design Logo files; Update README
* Update README
* Update README files
* Update relative path
* Update relative paths in README files
* Update Trident README file
* Repaired .stl file
* removoe .vscode folder
* update
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2022-04-04 18:07:42 -04:00
f1f820e4b0
Trident bed fans ( #661 )
...
* Add trident bed fans
* Add CannedBass mods
* Add installation instructions
2022-04-04 08:54:07 -04:00
15a143256b
In-Line Filament Dust Scrubber ( #577 )
...
* Create README.md
* Create Scrubby
* Delete Scrubby
* Create README.md
* Delete README.md
* Add files via upload
* Update README.md
* Create test
* Add files via upload
* Delete test
* Update README.md
* Update README.md
* Update README.md
* Delete Scrubby.STL
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
2022-04-04 06:41:49 -04:00
3ea38c4b9f
Lgx lite toolhead pcb mount ( #610 )
...
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
* Uploading untested PCB cover
* Rearrage
* Fixed readme
* Changed image
* jpg not jpeg
* Typo in readme
* Delete STL
* PCB cover
* Change to readme
* Update readme
* Update readme
* Added download instructions and image to readme
* Update readme
* Update readme
* Remove cover folder
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-04-03 18:52:34 -04:00
d336b43a0b
C92X_PsycHoShafts_Mount ( #665 )
...
* Create PsychoShaft
* Delete PsychoShaft
* Create README.MD
* Add files via upload
* Update README.MD
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete C92X_Extrusion_Bracket.stl
* Add files via upload
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create CAD
* Delete CAD
* Create CAD
* Delete CAD
* Add files via upload
* Create CAD
* Delete CAD
* Create CAD FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Add files via upload
* Delete CAD FILES
* Delete C92X_Camera_Bracket.stl
* Delete C92X_Extrusion_Bracket - No Support Required.stl
* Delete C92X_Extrusion_Bracket - Requires Support.stl
* Delete C92X_Spacer_Arm.stl
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/STL. directory
* Create FILES
* Add files via upload
* Delete FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create FILES
* Add files via upload
* Delete FILES
* updated all stl's for PR
Updated CAD and STL finds, no longer requires support for all files.
2022-04-03 18:51:54 -04:00
253556d06f
add V0 No-Drop Nuts for door latches ( #671 )
2022-04-03 18:51:27 -04:00
33a8da178b
New mods: VSW_Double_60mm_Fan_Mount and AB_Turbo_Mod ( #668 )
...
* Added new mod 'VSW_Double_60mm_Fan_Mount'
* Added new mod 'AB_Turbo_Mod'
* AB_Turbo_Mod edits
Added photos
* AB_Turbo_Mod edits
Minor changes to improve print quality
* AB_Turbo_Mod edits
Minor edits to further improve print quality
* Added step file for each mod for GPLv3 compliance
2022-04-03 18:13:57 -04:00
034a3b3053
Adding MKS Mosfet Mount ( #664 )
...
* Adding MKS Mosfet Mount
* Add image, part number and link to Mosfet
* fix link to Mosfet
2022-04-01 09:33:51 -04:00
94925a6c34
Revo Voron Added ( #652 )
...
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
2022-03-31 19:06:03 -04:00
4960ffb761
Simplified klicky documentation ( #669 )
...
* Simplified klicky documentation
Moved all the setup to the klicky repository.
Updated the probe dock.
* removed duplicate dock
* photo links corrected
* corrected dock orientation
2022-03-31 12:58:42 -04:00
4058b94da0
Adding Kirigami bed led front ( #633 )
...
* Kirigami_LED_Bed_Front.stl
Kirigami bed front with space for LED (Neopixel or equivalent)
* Add files via upload
* Delete printer_mods/reQu1em00/Kirigami_LED_Bed_Front/STL directory
* Create README.md
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete STL
* Update README.md
* update of readme to amend spelling mistake
* Delete Kirigami_LED_Bed_Front.stl
* Delete Kirigami_LED_Bed_Front_defuser.stl
* Create STL
* Delete STL
* Add files via upload
updated stls. Rechecked and, repaired
2022-03-19 14:48:10 -04:00
2575e29aad
Adding the Rainbow Barf Logo LED for Stealthburner ( #634 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
2022-03-19 14:45:13 -04:00
5149e65364
CR Touch Probe "Snap Mount" for v2.4 (MGN9) ( #655 )
...
* Create README.md
* Added CR Touch Mount for v2.4 MGN9
* Update README.md
* Update README.md
* Update printer_mods README.md
2022-03-19 14:41:50 -04:00
c90527f57a
More robust belt paths for Voron Switchwire ( #657 )
...
* adding first version of the mod
* renaming the files to respect proper name
* fix formatting of readme
* add pics of install
* adding clarification in the readme
* readme formatting
* readme formatting
* better name and link to master readme
* table formatting fixes
Co-authored-by: Jan 'Yenda' Trmal <jtrmal@apptek.com>
2022-03-19 14:41:24 -04:00
e9b9e5948e
Add ab plug for gantry ( #600 )
...
* add ab plug for gantry
* Fix README spacing
* Update README
* Update README to remove 2.4 clip. Change to direct commit
* remove incorect README
* Update Main README
2022-03-16 18:37:34 -04:00
49f1df8abb
Klicky for v0 ( #580 )
...
* new file structure and v0 release
* Update README.md
* updated printer path
* V2 readme update
* Update Klicky_v0_family.jpg
* Update README.md
* pictures cleaning up
* corrected STL errors
* Create klicky_base.jpg
* corrected v0 stepper_y reference
* updated integrated cowling
* uploaded Dragonfly BMO cowlimg
With integrated klicky mount
* corrected Dragonfly cowling
* small flaw corrected on Sherpa mini cowling
2022-03-16 18:35:53 -04:00
1c9fadcad8
Update V0-Adafruit Pixel Sticks README ( #641 )
2022-03-16 15:12:21 -04:00
2e8c80aa92
Updated for 2.4r2 ( #645 )
...
* Create README.md
* Delete printer_mods/bythorsthunder directory
* Create README.md
* Add files via upload
* Added Image
* Create stls
* Add files via upload
* Delete stls
* Create cad
* Add files via upload
* Delete cad
* Create image
* Add files via upload
* Update README.md
* Delete Front_Idler_MGN9_Backer.JPG
* Delete image
* Delete printer_mods/bythorsthunder/MGN9_Backers/CAD directory
* Create cad
* Add files via upload
* Delete cad
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Add files via upload
* Update README.md
Updated to reflect changes to Voron 2.4 with R2 release.
* Update README.md
Added BOM
* Update README.md
* Update README.md
* Add files via upload
Add stls for 2.4r2
* Create test
Added Folder for 2.4r1
* Delete test
* Create 2.4r1
Added 2.4r1 Folder
* Add files via upload
Moved Old files to new folder
* Delete 2.4r1
* Delete [a]_left_upper_belt_clip_MGN9_backer.stl
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete [a]_xy_chain_bridge_modified.stl
* Delete left_idler_upper_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Update README.md
* Add files via upload
Add CAD
* Delete Belt_Clamp.f3d
* Delete Front_Idler_A_Top_Modified.f3d
* Delete Front_Idler_B_Top_Modified.f3d
* Add files via upload
Updated Photos
* Add files via upload
* Update README.md
* Add files via upload
* Delete Front_Idler_MGN9_Backer.JPG
* Delete Rail_with_idler.jpg
* Delete Rails_installed.JPG
* Update README.md
2022-03-16 15:09:55 -04:00
5147698542
Ellis/Bed_Fans: Update readme, fix bug where M190 S0 would cause Klipper to wait indefinitely ( #649 )
...
* fix potential lock up with M190 override
It's common to have a slicer configured to send "M190 S0" before PRINT_START (to discourage the slicer from inserting it's own M190.) Klipper's handling of "M190 S0" is to ignore the command instead of waiting for the bed to cool to a temperature it likely will never reach. This change fixes the bedfans.cfg version of M190 to also ignore a S0 parameter (and doesn't freeze the entire printer waiting for the bed to cool to 0 degrees.)
* update
* update
* update
* update
Co-authored-by: garyd9 <garyd9@gmail.com>
2022-03-16 15:07:26 -04:00
194bd78df4
Update design with detent as suggested by devincody ( #650 )
2022-03-16 15:06:01 -04:00
6f41ddac2b
Belts Holder for v0 ( #542 )
2022-03-16 15:02:27 -04:00
035f700b57
keeping LGX current with MGN12/Trident info and mod (plus some extras) ( #596 )
...
* add MGN12/Trident information and mod, also a few helpful extras
* update links
* add SB notes
2022-03-16 14:50:27 -04:00
e0a76a50e8
Add LRS PSU screw terminal cover ( #604 )
...
* Add LRS PSU screw terminal cover
* Fix typo in README
* Update main README
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-03-16 14:49:32 -04:00
ae7937dc0e
Hartk mod update for 24r2 ( #638 )
...
* 24r2 mod updates
updated pin mod for 24r2, moved old files but moved to "old" folder
renamed and removed confusing GE5C files
added trident pin mod
* Update README.md
* renamed files
* added images
* Update README.md
* Update readme.md
* fixed printing orientation
* Update README.md
2022-02-23 18:45:28 -05:00
362d4f21f0
Add 4 channel relay under deck mount ( #599 )
...
* add 4 channel relay
* Update README
* Create mods index readme at root samwiseg0 folder
* Update Main README
* Remove Pi bootscreens
* Do not remove trailing space
2022-02-17 16:55:54 -05:00
7f66b8cbcc
Updated README file to explain issue with the Circuit Design Space Software. ( #629 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
* Initial comit
* Update README file
* Update README
* Update README
* Update README
* update main README
* update main README
* fix missing ')' on footnote 1
* Update README
* Inital Commit for Octopus V1.1 Color PIN Diagram
* Update README file
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Add footnote about MOTOR_PWR_IN Fuse if >24V used
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_Pro_V1.0_Color_PIN_Diagram directory
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_V1.1_Color_PIN_Diagram directory
* Shorten filename
* Update README
* update README
* Update README
* update README
* update README
* update README
* update README
* update README
* update README
* Update README
* update README
* update README
* Shoten Filenames
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update Voron 0.1 design
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2022-02-16 09:20:40 -05:00
7a217221ac
Add esp8266 nodemcu din mount ( #602 )
...
* Add esp8266 nodemcu din mount
* Update din clip link
* Update esp8266 mount to be universal
* Fix Din clip link
* Remove 2.4 din clip
* Update main readme
* Add link to what an esp8266/nodemcu is
* Update README to include WLED information
2022-02-13 12:36:04 -05:00
f9b123b81f
Adafruit adxl board changed size ( #613 )
...
* Address issues found by PineappleTuesday
* Fix IGUS mount for GY-291 and change file names for clarity
* Change Adafruit to reflect new CAD
https://learn.adafruit.com/adxl345-digital-accelerometer/downloads
2022-02-13 12:17:48 -05:00
5b152020c2
fix: Rapido mount for ABBN for stock AB ( #619 )
2022-02-13 07:06:18 -05:00
b86d7ead31
Add V2.4 corner cable hide ( #601 )
...
* Add corner_cable_hide
* Update main README
* Update files to be able to print right side up
2022-02-05 06:09:24 -05:00
0b1066d0d2
Mantis Dual 5015 - Usermods, More Hotend support(Mosquito, Rapido, Crazy Volcano), Redo Documentation, plus more. ( #594 )
...
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Add files via upload
* Delete carriage_assembly_hotend_mount.jpg
* Add files via upload
* Add files via upload
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left_cut_fan_ears.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right_cut_fan_ears.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v1.037.stl
* Add files via upload
* Update firmware_slicer_settings.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Delete Readme_v1.07.pdf
* Delete README.md
* Delete Macros_and_Config.txt
* Delete printer_mods/Long/Mantis_Dual_5015/images directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete printer_mods/Long/Mantis_Dual_5015/tmp directory
* Delete duct_rapido_v0.02_left.stl
* Delete duct_rapido_v0.02_right.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.01.stl
* Add files via upload
there was a slight interference between duct and hotend mount in 0.01. fixed this
* Update readme.md
* Add files via upload
* Delete Hotend_Mount_Dragon_v1.037.stl
* Delete duct_v1.037_Left.stl
* Delete duct_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Add files via upload
* Delete Hotend Mount_Rapido_v.02.stl
* Add files via upload
* Delete duct_rapido_HF_v0.02_left.stl
* Delete duct_rapido_HF_v0.02_right.stl
* Add files via upload
* Add files via upload
* Delete Magprobe Longs Rapido UHF v0.4.stl
* Delete Magprobe_v0.31_Crazy_Volcano.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.03.stl
* Add files via upload
* Add files via upload
* Update readme.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
Upper mount rotated 120 degrees. This varies depending on how your rapido was assembled.
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right.stl
* Add files via upload
* Delete duct_rapido_HF_v0.03_left.stl
* Delete duct_rapido_HF_v0.03_right.stl
* Add files via upload
* Delete duct_dragon_v1.037_Left.stl
* Delete duct_dragon_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.02_left.stl
* Delete duct_rapido_UHF_v0.02_right.stl
* Add files via upload
* Delete printer_mods/Long/Mantis_Dual_5015/CAD directory
* Add files via upload
updated CADs to include newer versions of ducts which have tighter fit to the hotend mount
* Delete Mantis_MGN12_CrazyVolcano_v0.03.step
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.03_left.stl
* Delete duct_rapido_UHF_v0.03_right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Delete duct_brace_v1.0.stl
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Delete printer_mods/Long/Mantis_Dual_5015/Usermods directory
* Update bom_acknowledgements.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Update readme.md
* Update readme.md
2022-02-02 18:53:59 -05:00
c4a0ac1ac9
Add extrusion thermistor mount ( #603 )
...
* Add extrusion thermistor mount
* Update main README
2022-02-02 18:40:19 -05:00
6c08e8886f
Add voyager gtx din mount ( #607 )
...
* Add voyager gtx din mount
* Update din clip link
* Update mount to be universal to work with trident din clip or 2.4
* Fix din clip link
* Add M2x10 to BOM
* Update Mod README & Main README
2022-02-02 18:30:06 -05:00
5599b345c7
Add microfit 2x3 skirt connector (ADXL) ( #605 )
...
* Add microfit 2x3 skirt connector (ADXL)
* Add to Main README
2022-02-01 10:49:25 -05:00
4698211675
Update readme.md: Notes about Igus EGLM vs KGLM ( #592 )
2022-01-24 16:37:56 -05:00
3cd8c17e7d
Exhaust Adapter for 100mm ventilation systems ( #550 )
...
* initial pull request for Angry CAM USB module
* corrected readme.md file
* updated readme.md file and removed obsolete images
* added missing images for cable path description
* remove obsolete images
* removed spaces from all file names and added more pictures to the readme.md
* reduced number of pictures and corrected typos in ReadMe.md
* added exhaust adapter for 100mm ventilation systems
* update of ReadMe.md files to correct typos and add more mounting information
* removed space characters from names
* corrected link to *.stl file
* added newline as trigger for CI to Readme.md
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-01-24 16:37:37 -05:00
852aae11ce
V0 skirt, add Adxl connector ( #521 )
...
* init
* Create README.md
* Update README.md
* PowerSwitch
* NamePlate
* images
* file rename
* Update README.md
* Create img5.jpg
* move
* Update img5.jpg
* Create img6.jpg
* Update README.md
* img7,8
* Update README.md
* Update README.md
* Create img9.jpg
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete Skirt_EmptyNamePlate.stl
* Create Skirt_EmptyNameplate.stl
* Update README.md
* Delete img0.jpg
* Update README.md
* Update README.md
* Update README.md
* Delete img9.jpg
* update images
* Create Skirt_adxl.stl
* Create img9.jpg
* Update README.md
* Update README.md
* Update README.md
* V0.1
* V0 Skirt set Trident column
Co-authored-by: tz <48024745+Zen3Dhu@users.noreply.github.com>
2022-01-24 14:38:51 -05:00
10aa02c7c2
V01 trident skirt remix ( #556 )
...
* Change docs, add tophat files WIP
* Update README.md
* Update README.md
* Update README.md
* change image
* Update README.md
* add renders
* add renders
* Update README.md
* add renders
* Update README.md
* Update README.md
* add render
* Update README.md
* add single file tophat
* replace corner
* Update README.md
* add live photos
* change pics size
* fix stl
* Create readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Add files via upload
* move cad files
* add cad file
* Update README.md
* add hinge standalone
* Update README.md
* Update README.md
* Add plain front skirt, single and sliced version, add rear leg with bowden tube connector
* Update README.md
* Update README.md
* Update readme
* Update README.md
Update readme
* Update README.md
fix readme
* Add Manual
* removed part - needs polishing
* Revert "removed part - needs polishing"
This reverts commit 034ee9aeb1
2022-01-24 14:34:58 -05:00
1f8c6a567a
Add Raspberry Pi Zero Bracket to printer_mods ( #562 )
...
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Delete Render_of_Raspberry_Pi_Zero_Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
2022-01-24 14:31:30 -05:00
e62fd8e8b5
Switchwire Clean Front Middle Grill ( #570 )
...
* Update README.md
Added MakeALeft to table
* Clean Front Middle Grill for Switchwire
* Delete front_mid_grill_no_magnets.stl
* Switchwire Clean Front Middle Grill
* missed Trident not supported X
* Installation note added
* fixed last change
* Update README.md
2022-01-24 14:31:09 -05:00
c5a03713ac
Adding an area to share the various Parts, Jigs and Mods that I use. ( #587 )
...
* Adding an area to share the various Parts, Jigs and Mods that I use.
* Repaired file
* Added Trident checkmark.
* Split Legacy mount into two files.
2022-01-23 12:02:03 -05:00
61a81d9006
V0.1 Spool Holder using Side Panel Clips ( #581 )
...
* Update README.md
* Initial commit
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* add folder
* Delete a
* Update readme.md
* Create Cornerpanel_Spoolholder.png
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* update STL and image
* Add Several Versions of Cornerpanels
* Update CAD
* Update CAD SH
* Update readme.md
* Update readme.md
* Add Photo
* Update readme.md
* Create IRL.jpg
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
2022-01-21 11:22:09 -05:00
24276d383c
Corrected adjustable clip STP ( #584 )
...
Replaced current STP file (which was a duplicate of 4mm clip) with the correct version.
2022-01-21 11:15:32 -05:00
cd727a29c5
LGX_Lite ( #563 )
...
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Delete LGX_Lite_Chainmount_IGUS.stl
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
address incompatibility with trident carriage
* Add files via upload
fixed tolerance
* Add files via upload
fixed orientation after previous commit.
* add mounting image
* add mounting image
* Fix image text
* generic mount tested
generic mount tested and reported working. removing warning
* Update README.md
added instructions on how to install and changed layout
2022-01-21 11:14:12 -05:00
fafc8b8e4f
Mathematical potato ( #527 )
...
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
2022-01-17 21:51:09 -05:00
a5de344334
Add Cable Management Duct ( #566 )
...
* Add ryandam cable management duct
* fix typo
* add appropriate mark for the trident
* fix link to project
2022-01-17 21:47:58 -05:00
d507fb6f5d
Power Inlet w Keystone Insert Slot for v0.1 ( #571 )
...
* Create temp.txt
* Add files via upload
* Create readme.md
* Create temp.txt
* Add files via upload
* Delete temp.txt
* Delete temp.txt
* Update README.md
* re-inserted my entry alphabetically
2022-01-17 21:46:19 -05:00
ef37f8709a
Adding mod ( #531 )
...
* Adding mod
* Add screw length
* Correct spelling
2022-01-17 12:53:27 -05:00
a68c358231
LGX Lite toolhead PCB mount ( #572 )
...
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
2022-01-17 12:41:03 -05:00
f068e0e210
Fixxed hole in file FrontBottom-Bracket.stl ( #575 )
2022-01-15 20:55:46 -05:00
5719e86d50
Added drop-in replacement, code optimization, improved setup & assemb… ( #555 )
...
* Added drop-in replacement, code optimization, improved setup & assembly guides
* Add files via upload
* Delete Dock_arm_endblock_Quickdraw_VSW.stl
* Add files via upload
* Add files via upload
* Add files via upload
* Delete quickdraw_SW_probe.PNG
* Add files via upload
* Update README.md
* Delete Dock_Arm_Quickdraw_VSW.stl
* Update README.md
* Delete Quickdraw_Probe_VSW.step
* Add files via upload
* Update dock_macros.cfg
* Update README.md
* Delete printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/Klipper_Macros directory
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Add files via upload
* Delete KeyBak_Mount_Z_endstop.stl
2021-12-31 16:43:58 -05:00
997ae5278a
The klipper configuration of the Fly-Gemini motherboard suitable for v0 ( #549 )
...
* Add fly-super8 configuration
* Add files via upload
* Add Fly Super8 board klipper cfg
* update docs url
* Add Fly-Gemini configuration and model for v0
* Repair model orientation and configuration
* Add a blank line at the end
* Add BOM and description
* Add BOM and description
* Modify * to x
Co-authored-by: kluoyun <2339883672@qq.com>
2021-12-30 07:58:40 -05:00
a21bc5fbf8
Adding a new mod, Z Belt Clip ( #558 )
...
* adding z belt clip mod
* Update readme.md
* Update readme.md
* Update readme.md
* Update and rename readme.md to README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: CLDesign <chen@chenludesign.com>
2021-12-28 16:51:39 -05:00
bbbb03fa3f
Voron 0.1 Neopixel Holder ( #547 )
...
* Create README.md
* Diagram
* Create Photos
* Update Photos
* Delete Untitled Sketch_bb.png
* Delete Photos
* Create Images
* Delete Images
* Create deleteme.html
* Add files via upload
* Delete deleteme.html
* Add files via upload
* Delete Untitled Sketch_bb.png
* Create rrg
* Add files via upload
* Delete rrg
* Create DD
* Add files via upload
* Delete DD
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Delete 20211113_164552.jpg
* Delete 20211113_174302.jpg
* Delete 20211113_174447.jpg
* Delete 20211113_190149.jpg
* Delete 20211114_160249.jpg
* Delete 20211114_160300.jpg
* Added Images
* Update README.md
* Added Showcase Images
* Added my mod
* Added X to Trident Column
* Update README.md
2021-12-26 18:07:36 -05:00
bc10276af7
Add DerekBackus mod section with skirt mods ( #548 )
...
* Create README.me
* Rename README.me to README.md
* Update README.md
* Trident Right Skirt Switch
Moved the switch to the right-hand front side of the machine on the skirt. Trident 300mm
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Added Filtered Main w/o Switch
* Update README.md
* Update links
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Added DerekBackus mods
* Update README.md
* Remove mistaken commit to .gitignore
Github desktop let me change this mistakenly. I reverted it back to the original. Sorry
* Combine mods into one
* Update README.md
* Update README.md
* Combine 2 derekbackus Mods into 1
* Update .gitignore
* Add LED Holder
Simple LED holder for the Trident and 2.4
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Added LED_Holder to Derek Backus
2021-12-23 10:59:21 -05:00
16fa31a72b
V2.4 Door Hinge M3 as shaft, 3mm panel, 180deg opening freedom ( #502 )
...
* added mod for door hinges
Voron V2.4 Door hinge mod for 3mm panel, m3 as shaft, opens approx 180 degrees
* Update README.md
* updated installation instructions
updated installation instructions for door hinges
* updated picture
new picture
* added checkmark for trident
* fixed trident checkmark
2021-12-21 13:49:44 -05:00
d565169278
Crossrail ( #489 )
...
* Create foo.txt
* Create foo.txt
* Add files via upload
* Delete foo.txt
* Delete foo.txt
* Add files via upload
* Create readme.md
* Delete printer_mods/Fiction/Crossrail directory
* Create foo.txt
* Create readme.md
* Create foo.txt
* Add files via upload
* Delete foo.txt
* Delete foo.txt
* Create foo.txt
* Create foo.txt
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete Crossrail_01.jpg
* Delete Crossrail_02.jpg
* Delete Crossrail_03.jpg
* Delete Crossrail_04.jpg
* Delete Crossrail_05.jpg
* Delete Crossrail_07.jpg
* Add files via upload
* Delete Capture 2021-10-08 at 11.31.10.jpg
* Delete Capture 2021-10-08 at 11.33.26.jpg
* Delete Capture 2021-10-08 at 11.39.28.jpg
* Add files via upload
* Update readme.md
* Update readme.md
* Create foo.txt
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete crossrail_6.jpg
* Add files via upload
* Update readme.md
* Update readme.md
* Delete foo.txt
* Delete foo.txt
* Create readme.md
* Create .foo.txt
* Add files via upload
* Delete printer_mods/Fiction/another_mod directory
* Create foo.txt
* Add files via upload
* Create foo.txt
* Delete printer_mods/Fiction/Exhaust_cover/images directory
* Add files via upload
* Add files via upload
* Delete Screenshot 2021-10-28 at 09.40.14.png
* Delete Screenshot 2021-10-28 at 09.40.27.png
* Delete foo.txt
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Create readme.md
* Create foo.txt
* Add files via upload
* Delete foo.txt
* Create foo.txt
* Add files via upload
* Delete angled_washer.stl
* Add files via upload
* Delete foo.txt
* Update readme.md
* Create readme.md
* Create foo.txt
* Add files via upload
* Delete foo.txt
* Add files via upload
* Create foo.txt
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Delete Screenshot 2021-11-08 at 13.28.51.png
* Delete Screenshot 2021-11-08 at 13.29.13.png
* Delete foo.txt
* Update readme.md
* Update readme.md
* Create readme.md
* Update readme.md
* Create hhh
* Create fff
* Add files via upload
* Add files via upload
* Delete fff
* Update readme.md
* Add files via upload
* Delete hhh
* Delete Exhaust_cover_SFS_05.jpg
* Add files via upload
* Delete Exhaust_cover_SFS_05.jpg
* Add files via upload
* Update readme.md
* Delete Exhaust_cover_SFS.stl
* Delete Exhaust_cover_SFS_clamp.stl
* Create ggg
* Add files via upload
* Delete ggg
* Create ewee
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Delete Exhaust_cover_SFS.stl
* Add files via upload
Larger opening for connector
* Add files via upload
* Delete ewee
* Create readme.md
* Create fff
* Add files via upload
* Create ddd
* Add files via upload
* Delete ddd
* Add files via upload
* Update readme.md
* Delete fff
* Create ert
* Add files via upload
* Delete printer_mods/Fiction/SSR_bracket_mounts/STL directory
* Delete ert
* Add files via upload
* Add files via upload
* Update readme.md
* Delete SFF_wiring.jpg
* Add files via upload
* Update readme.md
* Update README.md
* Update readme.md
* Delete Bed_wagos_assembly.png
* Delete Screenshot 2021-11-08 at 13.29.13.png
* Delete Screenshot 2021-11-08 at 13.28.51.png
* Delete .foo.txt
* Delete crossrail.stl
* Delete crossrail_slot.stl
* Create fff
* Added chamfers to counterbores
* Delete fff
* Add chamfers to bottom counterbores only
* Add files via upload
* Added more info about the mod
* Create fff
* Add files via upload
* Delete printer_mods/Fiction/LED_profile_mount directory
* Update README.md
Added rows to the table for all mods
* Renamed photos
Renamed photos to be more descriptive and updated readme to match
* Renamed photos
Renamed photos to be more descriptive and updated readme to match
* Renamed photos
Renamed photos and updated readme
* Update readme.md
* Update README.md
* Delete printer_mods/deepfriedheroin/v2_bed_wagos/labels directory
* Delete fff
* Added CAD for exhaust_cover
* Added CAD for Pi_SSR_bracket_mount
* Deleted SSR_bracket_mounts mod
* Deleted SSR_bracket_mounts and added checkmarks for Trident
2021-12-20 20:30:41 -05:00
ca47f47452
New coal container with lid. ( #516 )
...
* Delete 1_coal_for_infill_mesh.stl
New coal container with lid.
* Delete 1_coal_with_mesh.stl
New coal container with lid.
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before. Many thanks to Kevin Rahhal!
* Delete Lid.stl
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before. Many thanks to Kevin Rahhal!
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before.
* Delete VEFACH.step
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
With a new coal container with lid to avoid mess when moving the printer.
2021-12-20 20:29:58 -05:00
d75de68ced
Klicky macros move to the main repository ( #546 )
...
* Updated macro for safer Z on Trident and
Updated macro for safer Z on Trident and improved Z hop configuration
* linked macros to main repository
2021-12-20 20:25:41 -05:00
bef3704f79
Waveshare-5.5: increase hdmi cut out for more adapter compatibility ( #545 )
2021-12-18 10:30:33 -05:00
a648826df8
RefillPlease - Filament runout sensor ( #544 )
...
* Initial import of readme file
* Use mod sub directory
* Add some pictures
* Create dir
* Add pictures
* Resize images
* Update picture
* Remove old pic
* Add new one
* Trying to update pic
* Add again
* lower case image to force update
* Minor adjustments
* Wrong orientation
* Correct orientation
* Typo
* Add directory
* Add stls
* Add directory
* Add CAD
* Update Readme.md
* unnecessary tool
* Add mod RefillPlease
Filament runout sensor
* Unnecessary
* Unnecessary
* Unecessary
* Smaller holes for better screw contact
* Smaller holes for better screws contact
* Won't fit a V0 due to different extrusion size
* Add sample klipper config
* Add sample config reference
* Add somme message
* Compatible with 1.8 & trident since same extrusion specs
2021-12-16 15:26:08 -05:00
4e2693fabb
V0.1_Skirt_Mods ( #517 )
...
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Create V0.1 Skirt Inlet
* Delete Foot_Rear_Left_x1.stl
* Delete Foot_Rear_Right_x1.stl
* Delete Skirt_x1_Back_Powerinlet_ONEPART.stl
* Delete V0.1 Skirt Inlet
* Delete README.md
* Create README.md
* Add files via upload
* Create README.md
* Add files via upload
* Create V0.1_Skirt_Inlet
* Create V0.1_Skirt_Holes
* Delete V0.1_Skirt_Holes
* Delete V0.1_Skirt_Inlet
* Create README.md
* Create README.md
* Update README.md
* Update README.md
* Add files via upload
* Delete printer_mods/3vilson/V0.1 Skirt Inlet directory
* Update README.md
* Add files via upload
* Delete printer_mods/3vilson/V0.1 Skirt Holes directory
* Update README.md
* Update README.md
* Update README.md
* Delete Skirt_x3_L_access_hole.stl
* Delete Skirt_x3_ONEPART_access_hole.stl
* Delete Skirt_x3_R_access_hole.stl
* Add files via upload
* Delete Foot_Rear_Right_x1.stl
* Add files via upload
* Delete Foot_Rear_Left_x1.stl
* Add files via upload
* Delete Skirt_x1_Back_Powerinlet_ONEPART.stl
* Add files via upload
* Add files via upload
* Add files via upload
* Delete test 222.stl
* Delete test 333.stl
* Delete test 555.stl
* Delete Foot_Rear_Left_x1.stl
* Delete Foot_Rear_Right_x1.stl
* Delete Skirt_x1_Back_Powerinlet_ONEPART.stl
* Add files via upload
* Delete Skirt_x3_L_access_hole.stl
* Delete Skirt_x3_ONEPART_access_hole.stl
* Delete Skirt_x3_R_access_hole.stl
* Add files via upload
2021-12-16 08:13:38 -05:00
181a556f11
MeanWell RS PSU DIN Brackets ( #497 )
...
* MeanWell RS PSU DIN Brackets
Words words words.
* Spaces removed from filenames
* BOM Added
Screw types.
2021-12-16 08:10:40 -05:00
416cdefedb
270 Degree Clamping Hinges - User Mod ( #515 )
...
* Create readme.md
* Create Images
* Add files via upload
* Delete Images
* Delete 270-Clamping-Hinges-Assembly.gif
* Create temp
* Delete printer_mods/AlexanderÞór/270-Clamping-Hinges/images directory
* Create temp
* Add files via upload
* Added Assembly Gif - readme.md
* Created STLs folder
* Created CAD folder
* Delete temp
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
* Added STLs
* Delete temp1
* Update readme.md
* Delete temp2
* Update README.md
* Fixed grammatical/spelling errors
* Added new face plate styles
These 2 new face plates just have logo's added to them, one is embossed 1mm, the other goes right through the face plate.
* Added more images
New images of different variations of the face plates
* Update readme.md
* Update readme.md
* Delete Logo-Variation-1.png
* Delete Logo-Variation-2.png
* Add files via upload
* Update readme.md
* Delete face_plate_top.stl
* Add files via upload
* Update readme.md
* Delete 270-Clamping-Hinge.step
* Delete 270-Clamping-Hinge.f3z
* Create tempFile
* Add files via upload
* Delete tempFile
* Update readme.md
* Update readme.md
* Rename readme.md to README.md
* Update README.md
* Renamed Folder To Only Use ASCII Characters
* Update README.md
* Delete printer_mods/AlexanderT-Moss/270-Clamping-Hinges directory
* Create temp.txt
This is just to move files over to a new folder name
* Updated README.md
Changed my name on the table to only contain ASCII characters
* Rename printer_mods/AlexanderT-Moss/270 Clamping Hinges/temp.txt to printer_mods/AlexanderT-Moss/270-Clamping-Hinges/temp.txt
* Create tempCAD.txt
* Create tempSTLs.txt
* Delete printer_mods/AlexanderT-Moss/270-Clamping-Hinges/CAD directory
* Delete printer_mods/AlexanderT-Moss/270-Clamping-Hinges/STLs directory
* Create README.md
* Update README.md
* Delete temp.txt
* Update README.md
* Create temp.txt
* Add files via upload
* Create temp.txt
* Add files via upload
* Create temp.txt
* Add files via upload
* Renamed File Paths Respective To Changes
* Delete temp.txt
* Delete temp.txt
* Delete temp.txt
* Update README.md
* Update README.md
* Delete printer_mods/AlexanderÞór directory
* Update README.md
* Delete Screenshot 2021-10-28 at 14.55.47.png
2021-12-15 18:08:03 -05:00
baccula
Andrew
oookamiii
GalvanicGlaze
Ran Bao
Chris
Barna
slitte
Jonathan Michaelson
#2559
Richard Mitchell
Lukas
Chaoticlab
DatenThielt
Polar-Ted
Le0n
mandryd
Geoffrey Young
makealeft
Steve Peterson
ScramblerUSA
1-0-R
Obomaker3D
whi-tw
electroleon
Maple Leaf Makers
Kevin Aka Sam
Nathan
scanlory
LoganFraser
VinnyCordeiro
Chris Lee
Jot Powers
Oli Wright
Amey
elcrni
AaronHerrick
chri-kai-in
reapola
Mac10goesBRRRT
Backenfutter
RockNLol
cbc02009
Stephan Kohls
KiloQubit
Wile.e
jaysuk
zzp8202
tallman5
dmason1992
JoAnn Manges
johannchung
jooole
120decibell
3dconceptauvergne
filotto78
msagit
Hobson318
Tircown
Nic Eggert
dePrintinator
DaStivi
MathematicalPotato
Akio
LJ
Autocrit
Paul
Sascha Ohms
Maximilian Förg
Mike Thomas
jlas1
reQu1em00
jjgraphix
Jan "yenda" Trmal
samwiseg0
bythorsthunder
AndrewEllis93
TheSquiffy
hart
Bart Lammers
Samori Gorse
tz
Damian Gola
D4rkCelerity
Keith
Mrgl-Mrgl
Dam Vu Duy
Edwin
Jeremy Ruhland
Heenne
hymness1
kluoyun
chenthedesignmaker
nikolasbabetas
derekbackus
Glittering Dealer
Dr. Stefan Schimanski
splitified
3vilson
aTinyShellScript
Alexander Þór