Add PITFT50 45-degree mount (#677)

* Add PITFT50 45-degree mount

* typo

* Use relative links

printer_mods/CannedBass/PITFT50_45_degree_mount/README.md

@@ -0,0 +1,36 @@
+# BTT PITFT50 45-degree Mount
+
+![](Images/side-view.jpeg)
+
+This mod is an alternative frame mount for [alanho's PITFT50 screen mount](../../alanho/BTT_PITFT50_v2_Mount).
+They suggest using the [frame mount from sttts](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED/STLs/Voron-2.4-Mount-Generisch-v6.stl),
+which puts the screen at a 30-degree angle.
+I found that with the shorter guitar amplifier feet on the Trident and 2.4r2,
+the 30-degree mount makes the screen assembly too tall to fit under the frame.
+This mod replaces the 30-degree frame mount with a 45-degree mount, which provides plenty of clearance.
+
+This design was created from scratch, but was heavily inspired by other mods:
+
+* [roboticator24 - 4-inch Touchscreen Mount](../../roboticator24/4inch_touchscreen_mount_for_v2.4)
+* [jeoje - 4.3-inch Touchscreen Mount](../../jeoje/4.3_Inch_Touchscreen_Mount)
+* [sttts - Waveshare 5.5inch HDMI AMOLED Mount](../../sttts/Waveshare-5.5-inch-HDMI-AMOLED)
+
+This was tested with a BTT PITFT50 v2, but will likely also work with [sttts's 5.5-inch Waveshare mount](../../jeoje/4.3_Inch_Touchscreen_Mount),
+since the hole pattern is the same.
+
+## Bill of Materials
+* 6x M3x8 SHCS
+* 2x M3 T-Nuts
+* [alanho's PITFT50 mount](../../alanho/BTT_PITFT50_v2_Mount)
+
+## Assembly Instructions
+
+* Assemble the screen mount
+* Use 4x M3x8 SHCS to attach the frame mount to the screen mount
+* Insert 2x M3 T-nuts into the bottom of the frame
+* Thread 2x M3x8 SHCS into the T-nuts to attach the mount to the frame
+
+## Printing
+
+I printed with standard Voron settings, but this would probably be fine with fewer walls and less infill.
+I found this part very prone to warping, so you may want to  use a brim or ears.

printer_mods/README.md

@@ -80,6 +80,7 @@ like so:
  || [2-Channel Relay DIN Rail Bracket](./ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | :x: | :grey_question: | :heavy_check_mark: | :x: |
 |bythorsthunder|[MGN9 Backers Idlers](./bythorsthunder/MGN9_Backers)|New idler uppers for MGN9 Extrusion backers |:x:|:x:|:heavy_check_mark:|:x:|:x:|
 |CannedBass|[Trident Bed Fans](./CannedBass/Trident_Bed_Fans)| Bed fans for Trident |:x:|:grey_question:|:x:|:x:|:heavy_check_mark:|
+||[PITFT50 45-degree mount](./CannedBass/PITFT50_45_degree_mount)| Mount that puts the screen at a 45-degree angle for more vertical clearance |:x:|:grey_question:|:heavy_check_mark:|:x:|:heavy_check_mark:|
 | Ch4rlesB | [V0 Handles Slim](./Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | :heavy_check_mark: | :x: | :x: | :x: |
 | ChenTheDesignMaker | [Z Belt Clip](./ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | :x: | :x: | :heavy_check_mark: | :x: | :x:|
 | chrisrgonzales | [270° Front Panel Hinge](./chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | :x: | :x: | :heavy_check_mark: | :x: |