PiPlate Skirt mod and raspberry pi mount --- Trident Inverted Electronics mod (#688)

* Add files via upload

* Add files via upload

* Delete printer_mods/LoganFraser/TridentInvertedElectronics directory

* Add files via upload

* Update README.md

* Update README.md

* Update readme.md

* Update README.md

printer_mods/LoganFraser/PiPlate/README.md

@@ -0,0 +1,10 @@
+If you want to mount your Raspberry Pi so the usb and ethernet ports are externally accessable, look no further.  
+
+Supported: Pi 3B/4B and Trident or Voron 2.4 machines.  
+*New* Support added for Voron 2.4 250 size, and all 3 sizes of V2.4r2 
+
+BOM: 
+Uses stock hardware, no additional parts required. M2 screws for Pi to plate, other hardware is the same as stock skirt installation.
+
+![Pi Plate](PiPlate.jpg)
+![Pi Plate2](PiPlate2.jpg)

printer_mods/LoganFraser/TridentInvertedElectronics/readme.md

@@ -0,0 +1,18 @@
+# Trident Inverted Electronics Bay Mod
+(but can be used for the 2.4 as well with a hinged bed mod)
+
+# Major update to align with 2.4r2 fan mounts!  
+Included in the CAD (but not STLs) are the V2.4r2 skirt screw-on fan mounts. The STLs are available from the 2.4r2 STL repository. 
+
+Newly added: C shaped din rail supports so no additional hardware is required. Also allows rails to be more easily installed front to back of printer if desired, as the C shape allows them to be installed around the power inlet and PiPlate.
+
+You do not need custom panels!  The front Z stepper mounts have been modified to remove the captive part of the plate that locked the panel in place, so it can be just dropped in as shown in the animated gif below. 
+
+
+
+![Image of InvertedElectronics](InvertedElectronics.png)
+
+![Image of PanelInstall](BottomPlateInstall.gif)
+
+No additional hardware required, stock BOM parts only. 
+

printer_mods/README.md

@@ -231,6 +231,8 @@ like so:
 | | [Strain Relief w/ 10 Pin Microfit](./LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector |:heavy_check_mark:|:x:|:x:|:x:|
 | | [SSR Mounting Strap](./LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions |:heavy_check_mark:|:x:|:x:|:x:|
 | | [V2.4 Bed Wiring Grommet](./LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel |:x:|:x:|:heavy_check_mark:|:x:|
+|LoganFraser| [PiPlate](./LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident |:x:|:x:|:heavy_check_mark:|:x:|:heavy_check_mark:|
+||[Trident Inverted Electronics](./LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access.  |:x:|:x:|:x:|:x:|:heavy_check_mark:|
 |Long| [Mantis Dual 5015 Toolhead](./Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 |Majarspeed| [Hartk board mount galileo](./Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | :x: | :x: | :heavy_check_mark: | :x: |
 |MakeALeft| [Switchwire Clean Center Grill](./MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | :x: | :x: | :x: | ✔️ | :x: