z idler corner cable cover with drop holes and inline hole cutouts (#785)

* Create README.md

* Create README.md

* Create top_corner_cable_cover_with_drop_holes.f3d

* Add files via upload

* Create top_corner_cable_cover_with_drop_holes.stl

* Add files via upload

* Create top_corner_cable_cover_with_drop_holes_bottom.JPG

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Add files via upload

* modified fastener head support on CS holes

* modified fastener head support on CS holes

* Delete README.md

* update CS hole support

* Delete top_corner_cable_cover_with_drop_holes.f3d

* updated CS hole support

* Corner cable cover with drop holes

* Corner cable cover with drop holes

* Corner Cable Cover with Drop Holes

printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/README.md

@@ -0,0 +1,27 @@
+# Top Corner Cable Cover with Drop Down Holes (LED Wires)
+Covers cables that are running around the top corners of 2.4R2 extrusions behind the Z idlers with drop down holes around the vertical extrusions and inline holes with cutouts to keep the wire management as clean as possible.
+
+Holes are big enough to allow 2 pin microfit connectors pass through. Works perfectly with LDO LED PCB breakout board.
+
+**CAUTION**
+Check your max Z travel as there will be some loss.
+
+### Printing
+  * Print 1 cover per LED strip
+  * Default voron settings
+  * No supports needed
+
+### BOM
+
+Size | Qty
+--- | ---
+M3x8 | 2
+M3 T-Nut | 2
+
+* QTY per cover
+
+![Top Corner Cable Cover](Images/top_corner_cable_cover_with_drop_holes_front.JPG)
+
+![Top Corner Cable Cover](Images/top_corner_cable_cover_with_drop_holes_bottom.JPG)
+
+![Top Corner Cable Cover](Images/top_corner_cable_cover_with_drop_holes_installed.JPG)

printer_mods/README.md

@@ -128,6 +128,7 @@ like so:
 |DorjeDorf | [Duet 3 6HC Din Bracket](./DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | :x: | :x: | :heavy_check_mark: |:x:|
 | |[Duet 3 3HC Din Bracket](./DorjeDorf/Duet_3_3HC_Din_Bracket) |  V2.4 Duet 3 3HC Din Bracket | :x: | :x: | :heavy_check_mark: |:x:|
 |doubletrouble |[V0 Skirt Mod](./doubletrouble/V0_Skirt_Mod) |V0 Skirt Mod |:heavy_check_mark: |:x: |:x: |:x:|
+| Dr-Info | [Corner Cable Cover with Drop Holes](./Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and cutouts for inline wiring from 2020 extrustions | :x: | :x: | :heavy_check_mark: | :x: | :x: |
 |DrGhetto|[Ghetto Panels](./DrGhetto/GhettoPanels)|Printed panels for the Voron Zero|:heavy_check_mark:|:x:|:x:|:x:|
 |eddie |[V1.8 12mm Z Mod](./eddie/V1.8_12mm_Z_Mod) |Add V1.8 option for 12mm Z rods |:x: |:heavy_check_mark: |:x: |:x:|
 | |[LED Bar Clip](./eddie/LED_Bar_Clip) |Modular LED Clip for mounting LED Strip to 2020 Extrusions |:x: |:heavy_check_mark: |:heavy_check_mark:|:x:|:heavy_check_mark:|
@@ -414,3 +415,4 @@ like so:
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 | zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: |
 | ZZP8202 | [Pull-out electrical store](./ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | :x: | :x: | :heavy_check_mark: | :x: | :x: |
+