Trident Internal Filament Spool Holder (#719)
* Create elcrni * Delete elcrni * Create sdfsdfs * Update and rename sdfsdfs to Voron spool holder mods * V2.4 Trident Spool Holders * Delete V2.4-Trident-Spool-Holders * Delete Voron spool holder mods * V2.4-Trident-Spool-Holders * V2.4-Trident-Spool-Holders * Updates * Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory * Create 1 * Create 2 * V2.4-Trident-Spool-Holders * File Updates * Updates * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Delete BB__spool_arm_left.3mf * Delete BB__spool_arm_right.3mf * Delete BB__spool_core.3mf * Add files via upload * Delete BB__spool_arm_left.stl * Delete BB__spool_arm_right.stl * Fixed STL orientation * Update README.md * Update README.md * Create Readme * Create README * Added new STLs Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame * Update README.md * Create README.md * Update README.md * Update README.md * Create README.md * Initial Release STL Upload * Create README.md * Add files via upload * Update README.md * Add files via upload * Update README.md * Update README.md * Update README.md * Update README.md * Create README.md * Add files via upload * Update README.md * Update README.md * Add files via upload * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md * Update README.md
This commit is contained in:
elcrni
GitHub
parent
3796f238c1
commit
e238ec3c02
|
|
@ -125,6 +125,7 @@ like so:
|
|||
| |[LED Bar Clip](./eddie/LED_Bar_Clip) |Modular LED Clip for mounting LED Strip to 2020 Extrusions |:x: |:heavy_check_mark: |:heavy_check_mark:|:x:|:heavy_check_mark:|
|
||||
| edwardyeeks |[Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) |Trident style side power inlet for V2.4 using Z Drive Motor Tensioner Mod - By @Amarpal89 |:x: |:x: |:heavy_check_mark: |:x:|:x:|
|
||||
| elcrni | [V.24/Trident Spool Holder](./elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark:|
|
||||
| | [Trident Internal Spool Holder](./elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size 1kg spool | :x: | :x: | :x: | :x: | :heavy_check_mark:|
|
||||
| Ellis |[15x15 Drag Chain Ends](./Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end pieces | :grey_question: | :grey_question: |:heavy_check_mark: |:grey_question:|
|
||||
| |[Badge Retractor Mount](./Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the way. | :grey_question: | :grey_question: |:heavy_check_mark: |:x:|
|
||||
| |[Bed Fans](./Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | :x: | :x: |:heavy_check_mark: |:x:|
|
||||
|
|
|
|||
|
|
@ -0,0 +1 @@
|
|||
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 3.5 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.3 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 4.8 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 4.0 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.6 MiB |
Binary file not shown.
|
After Width: | Height: | Size: 2.9 MiB |
|
|
@ -0,0 +1 @@
|
|||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 1.3 MiB |
|
|
@ -0,0 +1,50 @@
|
|||
## Important Note:
|
||||
**This mod works on Trident 300 and 350 builds ONLY**. 250 build simply has no space needed to accomodate the holder and the spool.
|
||||
Sliding 8mm linear guides allows for adjustable spool width. Supported spool size is 200mm in diameter and up to max 75mm wide, typical for spools up to 1kg - 1.2kg.
|
||||
|
||||
## Changelog
|
||||
08.05.2022.
|
||||
Initial Release
|
||||
|
||||
20.05.2022.
|
||||
Added new PTFE guide with tilted opening that guides the PTFE slightly to the left to prevent sharp bends. Just one lower guide is recommended now with this new top guide.
|
||||
|
||||
## Why?
|
||||
|
||||
Over the years i've been getting nicer prints and almost 100% eliminated wet filament ooze by placing the filament spool inside of enclosed chamber. Since my printers work almost 24/7, chambers are always hot enough to keep the filament dry and produce perfect prints.
|
||||
|
||||
## Print Setup
|
||||
|
||||
All parts are printed without supports. Recommended material is ABS/ASA. Recommended perimeter count is 4 and 5 top/bottom layers with infil from 30%+. All parts in STL already have correct orientation, just import and print.
|
||||
|
||||
STL File naming:
|
||||
- ..._x2_.stl simply means you need to print 2 parts
|
||||
|
||||
## BOM
|
||||
|
||||
- 8x F688zz Flange Radial Ball Bearing 8 x 16mm
|
||||
- 2x 8x100mm linear guide
|
||||
- 12x M3x4mm countersunk screws (M3x6 BHCS or SHCS screws can be used as well)
|
||||
- 18x M3x4x5 Brass Heat Inserts
|
||||
- 2x M5x16mm
|
||||
- 2x M5x10mm
|
||||
- 4x M5 T-Nut (Regular or Hammerhead)
|
||||
- 6x M3x8mm
|
||||
|
||||
## Images
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
|
@ -0,0 +1 @@
|
|||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue