Lgx lite side can board mount (#737)

* LGX Lite Side Mount

* Readme tweaks

printer_mods/README.md

@@ -139,6 +139,7 @@ like so:
 |  | [Voron 2.4 cable clamps](./evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring on your build | :x: | :x: | :heavy_check_mark: |:x:|
 | falo | [Magnetic Exhaust Grill Cover](./falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | :x: | :x: | :heavy_check_mark: | :x: |
 | | [Toolhead PCB to CAN Mount Adaptor](./falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in Afterburner PCB spacing | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
+| | [LGX Lite CAN Side Mount](./falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | Fiction | [C270 mount](./Fiction/C270_mount) | Logitech C270 webcam front-centre mount | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 | | [Crossrail](./Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 | | [Exhaust_cover](./Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |

printer_mods/falo/lgx_lite_side_can/README.md

@@ -0,0 +1,15 @@
+# LGX Lite CAN Side Mount (Huvud/SHT42)
+
+Side mount for CAN toolhead boards with NEMA 17 sizes such as [Huvud](https://github.com/bondus/KlipperToolboard) and [FLY-SHT42](https://mellow.klipper.cn/#/board/fly_sht36_42/).
+
+You will need two M3 square nuts that should have come with the LGX Lite to put into the side holes for mounting.
+
+I am using this on my Voron 2.4 with Mrgl-Mrgl's [LGX Lite Mount](../../Mrgl-Mrgl/LGX_Lite_Mount/) for the extruder.
+
+![Render](./Images/image.png)
+
+## BOM
+- 4x M3 Square Nuts (Included with LGX Lite)
+- 4x M3 Heat Sets (Standard Voron Spec)
+- 2x M3x6 BHCS to mount through to LGX Lite holes
+- 4x M3x6 SHCS for board mounting (or whatever is suitable for your board)