Added bed holder for kirigami bed (#713)

printer_mods/nhchiu/V0.1_Movable_Pulley_Z/README.md

@@ -13,11 +13,11 @@ There already are belt-driven mods like [theFPVGeek's V0 Z Belt mod](https://git
 
 - 11 x M3x8 BHCS
 - 2 x M3x10 BHCS
-- 4 x M3x12 BHCS
+- 4 x M3x12 BHCS (2 extra is needed for kirigami bed)
 - 5 x M3x16 BHCS
 - 2 x M3x20 BHCS
 - 3 x M3 Washer
-- 2 x M3 Threaded Insert
+- 2 x M3 Threaded Insert (4 extra is needed for kirigami bed)
 - 4 x M3 Hex Nut
 - 3 x M5x20 BHCS/SHCS
 - 3 x M5 Hex Nut
@@ -57,10 +57,14 @@ Note the places that need threaded inserts. You can pre-apply them.
 
    The `80T_gear_7mm.stl` provided is a thinner version of the [M4 toothed gear](https://github.com/VoronDesign/Mobius-Extruder/blob/master/STLs/%5Ba%5D_80t_gear.stl) with 7mm of tooth width instead of 9mm to save a little weight and space. Both should work here.
 
-1. Bed Holder
+1. Bed Holder (for Stock V0.1)
 
    ![Bed Holder](./Images/Bed_Holder.png)
 
+1. Kirigami Bed Holder
+
+   ![Bed Holder](./Images/kirigami.png)
+
 1. Top Idler
 
    ![Top Idler](./Images/Top_Idler.png)
@@ -144,6 +148,11 @@ Here's a video of testing the bed motion:
 
 ## Changelog
 
+### 2022-05-03
+
+- Added the adapted bed holder for [kirigami bed](https://github.com/christophmuellerorg/voron_0_kirigami_bed) designed by **@zalupa#9238**.
+  Go to [./kirigami_adaptor](./kirigami_adaptor) for the files.
+
 ### 2022-04-20
 
 - Redesigned the upper parts (again) for the following purpose:

printer_mods/nhchiu/V0.1_Movable_Pulley_Z/kirigami_adaptor/README.md

@@ -0,0 +1,11 @@
+# Bed holder for kirigami bed
+
+[kirigami bed](https://github.com/christophmuellerorg/voron_0_kirigami_bed) is a sheet metal bed designed for V0 by [Christoph Müller](https://github.com/christophmuellerorg).
+
+This adapted holder for kirigami bed is fully contributed by **@zalupa#9238**. Thanks for allowing me to include it in this mod.
+
+NOTE:
+
+In `kirigami-belt-rear.stl`, there is a built-in 0.2mm-thick layer that bridges through the holes to help printing without support. They can be cut or poke through by screw easily.
+
+![sliced](./sliced.png)