Add Revo Nozzle Skirt (#751)

printer_mods/Andre/Revo_Nozzle_Skirt_Trident/README.md

@@ -0,0 +1,30 @@
+# Revo_Nozzle_Skirt
+
+A Revo nozzle box hidden in a Voron Trident skirt.  
+
+![Closed](Images/Photo-Closed.jpg)
+![Opened](Images/Photo-Opened.jpg)
+
+
+Compatible with 250/300/350 Tridents.  
+
+- 250 - 2 Nozzles each
+- 300 - 4 Nozzles each
+- 350 - 5 Nozzles each
+
+
+# Bill Of Materials
+
+- 2x 6mm x 3mm Round Magnet
+- 2x M3 Heat-set insert
+- 2x M3x8 BHCS
+
+
+# Instructions
+
+- Print a Skirt and Nozzle Holder the appropriate size for your printer.  the A version is for the front-left and back-right corners. and the B version is for the other 2 corners.
+- install the 2 heat-set inserts into the ends of nozzle-holder part.
+- install 1 magnet in the skirt, and one in the nozzle-holder such that they attract eachother when the door is installed.
+- insert the nozzle holder into the skirt and fasten with 2 M3x8 BHCS
+- Remove the stock skirt piece from your trident and install the new one in it's place.
+

printer_mods/README.md

@@ -52,6 +52,7 @@ like so:
 |Andre|[Mini Afterburner Strain Relief](./Andre/Mini_Afterburner_Strain_Relief)|A replacement strain relief for the Mini Afterburner toolhead|:heavy_check_mark:|:x:|:x:|:x:|
 | |[V0 Neopixel Front Bed Mount](./Andre/V0_Neopixel_Front_Bed_Mount)|A replacement Front Bed Mount with room for a neopixel or dotstar behind the logo|:heavy_check_mark:|:x:|:x:|:x:|
 | |[Mini Afterburner ADXL345 Mount](./Andre/Mini_Afterburner_ADXL345_Mount)|Mount for an AXDL345 on the Mini Afterburner|:heavy_check_mark:|:x:|:x:|:x:|
+| |[Revo Nozzle Skirt](./Andre/Revo_Nozzle_Skirt_Trident)|A Revo nozzle box hidden in a Trident skirt.|:x:|:x:|:x:|:x:|:x:|:heavy_check_mark:|
 |antoinecellerier|[DS18B20 Sensor Mount](./antoinecellerier/ds18b20-sensor-mount)|DS18B20 temperature sensor mount|:heavy_check_mark:|:x:|:x:|:x:|:x:|
 |arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 | |[Magnetic hotend fan cover](./arkeet/magnet-fan-cover)|A replacement hotend fan cover, held with magnets instead of screws. |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|