V2.4 Door Hinge M3 as shaft, 3mm panel, 180deg opening freedom (#502)

* added mod for door hinges

Voron V2.4 Door hinge mod for 3mm panel, m3 as shaft,  opens approx 180 degrees

* Update README.md

* updated installation instructions

updated installation instructions for door hinges

* updated picture

new picture

* added checkmark for trident

* fixed trident checkmark

printer_mods/README.md

@@ -250,6 +250,7 @@ like so:
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
 | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: |
 |QuackProfit|[V0 Adafruit NeoPixel LED Mounts](./QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | :heavy_check_mark:|:x:|:x:|:x:|
+| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](./quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: |
 |randell   |[Door Hinges](./randell/Door_Hinges) |Door hinges that use an M3 bolt for a pin and bolts thru the panel |:x: |:x: |:heavy_check_mark: |:x:|
 ||[Microswitch Pod for PCB](./randell/Microswitch_Endstop) |Modified endstop pod for use of endstop switches mounted on a PCB |:x: |:x: |:heavy_check_mark: |:x:|
 | raymondh | [Large Spool Holders](./raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | :x: | :heavy_check_mark: | :heavy_check_mark: |:x:|

printer_mods/quattroerik/front_door_m3_180_deg_3mm/README.md

@@ -0,0 +1,14 @@
+Door hinges mod for v2
+- use m3 screw and heat insert as shaft (inspired by mosher)
+- adjusted to 3mm panel thickness
+- Doors can be opened approx. 190 degrees
+
+What you need additionaly to the original door hinges:
+4x Standard Voron Heat insert
+4x M3x35mm screw SHCS
+
+![Image of Hinges](./door_hinge_new.png)
+
+Assembly instructions: Insert the heat insert from below as seen in the picture. Assembly to the Frame on the sides of the printer with the standard M3x8mm and Hammerhead nut.
+
+![Image of Hinges](./Assembly.png)