Revo skirt nozzle holder (#786)

* Initial mod commit

* Update README.md

* Fixed image paths

* Update README.md

* Update README.md

* Update README.md

* Prepare for pull request

Modified file names, formats, and STL orientation to comply with pull request requirements.

* Add space after username per PR

* Formatting corrections per PR comments

* Rename STL

* Add files via upload

* Remove spaces from image names

* Add renamed image files

* Fix image references

* Correct ordering of table

* Convert to relative link

printer_mods/README.md

@@ -60,6 +60,7 @@ like so:
 | |[MGN12 X-axis](./arkeet/mgn12/)|Replaces the dual MGN9H rails with a single MGN12H. |:x:|:x:|:heavy_check_mark:|:x:|
 | |[V0 DC inlet](./arkeet/v0-dc-inlet/)|Skirt inlet for external 24V DC power supply. |:heavy_check_mark:|:x:|:x:|:x:|
 |aTinyShellScript |[RS PSU DIN Bracket](./aTinyShellScript/RS_PSU_DIN_Brackets)|DIN brackets for MeanWell RS PSUs with 80mm spacing. |:grey_question:|:grey_question:|:heavy_check_mark:|:grey_question:|:grey_question:|
+|baccula |[Revo Nozzle Holder for v2.4 350](./baccula/revo_skirt_nozzle_holder/)|A remix of Andre's design allowing for skirt storage of 4 E3D Revo nozzles in the skirt of your 350mm v2.4. |:x:|:x:|:heavy_check_mark:|:x:|:x:
 |Backenfutter|[Mount for Electreeks Camera](./Backenfutter/Mount_for_Electreeks_Camera)|This Mod is a simple "One Piece" mount for the popular Electreeks Camera. |:grey_question:|:grey_question:|:heavy_check_mark:|:x:|:grey_question:|
 |Badnoob |[Precision AB Drive](./Badnoob/Precision_AB_Drive)|Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. |:grey_question:|:grey_question:|:heavy_check_mark:|:x:|
 | |[AB-BN Afterburner mod (5015)](./Badnoob/AB-BN)|Improved Afterburner with 5015 fan |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|

printer_mods/baccula/revo_skirt_nozzle_holder/README.md

@@ -0,0 +1,24 @@
+# Revo Nozzle Holder v2.4 350mm
+Remix of [Andre's](../../Andre/Revo_Nozzle_Skirt_Trident) skirt-mounted nozzle holder to fit Voron 2.4 350mm printers, the BOM and installation steps are the same.
+
+This will fit up to 4 nozzles, and uses the '300mm' part from Andre's design, unmodified (even though this uses the 300mm part from the Trident, it will only fit the 350mm v2 due to differences in skirt design).
+
+![CAD View 1](./Images/iso_closed.png)
+![CAD View 2](./Images/iso_open.png)
+![Installed Open](./Images/print_open.jpg)
+![Installed Closed](./Images/print_closed.jpg)
+
+# Bill Of Materials
+
+- 2x 6mm x 3mm Round Magnet
+- 2x M3 Heat-set insert
+- 2x M3x8 BHCS (SHCS will work as well)
+
+
+# Instructions
+
+- Print skirt and nozzle holder parts (the skirt piece will be placed in the right-front position of the printer).
+- Install the 2 heat-set inserts into the ends of nozzle-holder part.
+- Install 1 magnet in the skirt, and 1 in the nozzle-holder such that they attract each other when the door is installed.
+- Insert the nozzle holder into the skirt and fasten with 2 M3x8 BHCS
+- Remove the stock skirt piece from your v2.4 and install the new one in its place (Note, you will likely need an angled hex driver or ball-end driver to install the skirt bolt with the nozzle tray installed).