* Add CW2 support for Ellis/Single_MGN9H_Carriage, wording/formatting updates for other Ellis mods
Add CW2 support for Ellis/Single_MGN9H_Carriage, wording/formatting updates for other Ellis mods
Add CW2 support for Ellis/Single_MGN9H_Carriage, wording/formatting updates for other Ellis mods
Add CW2 support for Ellis/Single_MGN9H_Carriage, wording/formatting updates for other Ellis mods
* bed fan macro stylistic changes, add note about other STLs needed for MGN9H mod
bed fan macro stylistic changes, add note about other STLs needed for MGN9H mod
* Add a stealthburner toolhead for creality e3 hotend.
* file naming convention fix
* requested changes and additional fixes from testing
- no spaces in filenames
- STEP available
- pneumatic coupler version available
- clarified nozzle position and reference plane with wile.e
- (compatibility) cutouts made to fit inductive probes without recessed screw heads, thanks Jason.
- (printability) cutout for heatbreak setscrew is now a a straight-sided slot not a matching hole
- (printability) heatsink to toohead back mounting screws are no longer through holes, rear cutouts now print neatly.
* stls that were missing from last commit
* Delete Stealthburner_Printhead_Creality-1 v9.f3z
removal of interim .f3z
* Delete SB_C-E3_TH_Rear_CW1-nowing.stl
remove stl we don't need
* general tidyup
- Better arranged assembly, pneumatic coupler version is now a separate assembly rather than timeline trickery
- single step for both versions
- removed a tiny artefact as spotted by newphreak
* RC1 compatibility note
* fixed failing stls in netfabb
apparently i forgot to check this for this round of exports, should be sorted and build ok
* First commit
* add mod to README
* Fix typo on README
* Update README.md
* Update README.md
* add picture to README
* updated README
* Renamed from 'cable cover' to 'connector cover'
* Renamed stl
* updated picture info and prosject info
* Renamed stl in accordance with naming convention
Co-authored-by: Anders Samuelsen <sammynorway@samuelsen.in>
* Add files via upload
* Delete back_panel_dxf.dxf
* Delete back_panel.dxf
* Add files via upload
Was missing 73mm hole in DXF file for fan, cleaned up file name too
* Added files for Schurter plug panel mod
* Added more images for Schurter plug panel mod
* Updated README.md with the Schurter plug panel mod description
* Added CAD file for Schurter plug panel mod
* Removed necessity of support for plug panel mod
* Update of readme for Schurter plug panel
* updated image for Schurter plug panel mod printed
* minor update of CAD and STL for Schurter plug panel mod
* fixed typos in Schurter plug panel readme
* added 2.4r1 compatibility comment in Schurter plug panel mod readme
* NozzleWiper Mod
* Update README.md
* Fixed position in README.md
* Removed tracking from AliExpress URLs
* Doc and config updates
Removed LICENSE.TXT file
Modifications to klipper configuration to use nonsense default values to force the user to configure it appropriately
* Update nozzlewiper.cfg
Spelling Fix
* Improved printability and naming of parts
* Fixed printability issues
* Added mark for Trident
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update readme.md
* Duct Bracing
Helps with the resonance graphs (attenuates the ~125hz peak)
* Delete Duct_Brace_v1.0.stl
* Update readme.md
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Dragon directory
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Rapido_Crazy_Volcano directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete printer_mods/Long/Mantis_Dual_5015/STLs/Duct_Brace/Full_Brace/Rapido_Crazy_Volcano directory
5015s come in many sizes, this accounts for the 5015s that are slightly larger (~51mm instead of 50mm diameter)
* Add files via upload
5015s come in many sizes, this accounts for the 5015s that are slightly larger (~51mm instead of 50mm diameter)
* Add files via upload
* Update readme.md
* clarification
* Update readme.md
* Update readme.md
* Delete Duct_Brace_Upper_Only_v1.0.stl
* Add files via upload
* Add files via upload
* Delete Duct_Brace_Rapido_Crazy_Volcano_Full_v1.1_Closed_Mount.stl
* Delete Duct_Brace_Rapido_Crazy_Volcano_Full_v1.1_Open_Mount.stl
* Slotted back clamp hole. All 5015s are not 50mm.
allows adjustability in where the clamp sits. all 5015s are not 50mm diameter.
* Delete Duct_Brace_Dragon_Full_v1.0_Closed_Mount.stl
* Delete Duct_Brace_Dragon_Full_v1.0a_Open_Mount.stl
* added slots to account for different 5015 sizes
* Update readme.md
* more airflow, less buildplate clearance
* add info on duct 1.043e for Dragon and Mosquito
* Update readme.md
* Update carriage_assembly.md
* Hotend Mount with Brace for Sherpa
Hotend mount which adds a spot to triangulate the sherpa mini mounting at the front. Uses modified sherpa mini housing_front
* Update readme.md
* Add files via upload
* Update readme.md
* added sherpa front brace info
Hotend_Mount_Dragon_v1.040_sherpa_brace.stl allows usage of a modded front housing for the sherpa mini which triangulates the sherpa mini mounting for added stability.
* pics for modified hotend mount/sherpa bracing
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete Mantis_MGN12_v1.041.step
* Delete Mantis_MGN12_Dragon_v1.043e.step
* 1.041 and 1.043 ducts and hotend mounts with brace
* Delete Mantis_MGN12_CrazyVolcano_v1.0.step
* updated to include brace.
* deleting files to update
* updated CADs. Combined Some and added Brace
* Update readme.md
* repaired STL
* add cads
* add Voron 2.4 handle mod
* fixed typo for check mark
* fixed typos
* add STEP export of 3D model
* renamed STL file to conform to Voron naming conventions for accent colors
* STL mesh repaired
Co-authored-by: Lutz Dittrich <lutz.dittrich@i-gos.de>
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
* Update README.md
Added information about how to use the Rainbow Barf on Klipper using the main repo, and how to mix it with the nozzle RGBW LEDs.
* Update README.md
Added warning concerning JLCPCB not providing the WS2812B-2020 LEDs anymore.
* Update README.md
Added an entry on the 'Updates' section.
* Simplify to a single fusion file.
Update all the DXF to new v2.4R2 dimensions (1mm smaller across both dimensions)
Update README with details
Add new screenshot to show how to save DXF files from Fusion
* fix table formatting
* fix CAD link
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
* added REVO_VORON and removed slice announcement
Its been a year, I don't need to keep the slice announcement in there
* Create README.md
* Update README.md
Added M3x20 to BOM
* Update README.md
* Add files via upload
uploaded STLs
* add CAD data and folder structure
* Update README.md
* Update README.md
* Update README.md
* uploaded pictures
* Create support_03.jpg
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed STEP and STLs
* renamed STLs
* changed hole design of brace screw hole
Thanks barthini for the idea!
* added images
* Update README.md
* changed M3 screw length and renamed project
* added assembly instructions and pictures
* Update assembly_base_plates_01.jpg
* Update README.md
* removed image
* added mod to modlist
* Update README.md
* Update README.md
* added supports and compatibility to 2.4r2
added base plates with forks for the rockers compatible with the new r2 feet. Also added in-model-supports to support the holes over the overhang for the rear panel. As requested by user ✪Runanaツ#3906 I added a version for 6mm thick panels (including foam tape).
* Updated the README and pictures to encorporate the recent changes.
* Update README.md
* Add additional support to shorten bridging
also removed supports entirely in CAD data
* Delete Thumbs.db
removed Thumbs.db - thanks Windows
* AngryCAM USB V2 Update
* corrected Readme.md, due to missing content
* removed redundant image and updated ReadMe.md
* updated ReadMe.md with more details on V2 and re-added V1 pictures for history reasons
* remove typos from ReadMe.md and updated/added some images
* Final changes to ReadMe.md
* bugfix #1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20
* bugfix 1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
Only the baseplate has changed.
* Moved the whole mod to the "abandoned_mods" folder.
* Update README.md
* Update [a]_2.4_base_plate_b_mod_x2.stl
* added the change log section
* Fixed Link
* Fixed Link
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
* fix order in readme.md
* move purge bucket mod to abandoned mods
* update readme.md for abandoned mods.
* Fix broken link to abandoned mod.
* fix broken link to mod *for real this time*
* Fix typo in readme
* SB+CW1+PCB Cover Added
Added a low-poly style cover for users that are still rocking the Clockwork1 and PCB with Stealthburner. This should be compatible with ERCF and Hartk style PCBs.
* Update README.md
* Update README.md
* Fixed empty STP
Fixed the STP file which was empty for some reason and hopefully corrected the merge issues with the main readme.md
* Fixed formatting on mods README.md
* Update README.md
* Add thermistor holder zero
* Add fannypack zero
* Update to level readme
* Add cad for fannypack
* Add dxf for fannypack zero
* orientate fannypack zero for printing
* fixed readme links
* Fixed missing section that I didn't push
* Added non affiliate links
* Fixed last affiliate link
* Update README.md
Co-authored-by: rr-david <david@rivelinrobotics.com>
* Creation (from prior attempt) of a laser-cut door panel for 2.4
* add stuff to master readme
* Update README.md
Change the links to relative links per request
* Added entry and files for the Raspberry Pi Camera Mount
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Adjusted naming convention of files to remove spaces
* Added the flex cable requirements
* Minor fix to README.md
* Minor fix to README.md
* 6mm slot cover
Simple cover for extrusions with 6mm slot width to prevent intrusion of dust and leaked fused filamet
* update
* update
* Delete slot_cover.3mf
* Delete slot_cover_one_side.3mf
* Update README.md
* Update README.md
Moved at the bottom of the file as required
* Update README.md
Moved under the following line:
| | LGX Lite toolhead PCB mount | Mount for Hartk's toolhead PCB(s) for LGX Lite | ❌ | ✔️ | ✔️ | ✔️ | ✔️ |
* Inital Upload
1. Contrains rough draft of Readme.md. Will provide updates with Images soon.
2. Added images directory with some images of the build.
3. Added STL directory with all printed parts.
* added note about the nevermore micro.
updated readme with note about coupling this exhaust filter with the nevermore micro.
* Update README.md
minor update to improve wording.
* Update README.md
fixed heading formatting.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed project directory, updated mods README
updated printer_mods readme.
renamed HEPA filter directry to remove spaces.
* added image of filter
* Update README.md
Modified instructions to inlcude steps for mounting to the chamber.
* Changes requested by cbc02009
* removed ref from Amazon links.
* reordered dePrintinator in printer_mods README.md
* fixed non-manifold geometry issue in lid
Fixed, hopefully should pass the CI process now.
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* V0 Belted Z Revisions
Updated bed mount to have better grip on belt teeth
* Update V0-ZBelt-KirigamiBed_body.stl
revised body
* Updated Repo
Removed problem CAD files
* Re-commit
attempt to fix problem stl
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
* Uploading untested PCB cover
* Rearrage
* Fixed readme
* Changed image
* jpg not jpeg
* Typo in readme
* Delete STL
* PCB cover
* Change to readme
* Update readme
* Update readme
* Added download instructions and image to readme
* Update readme
* Update readme
* Remove cover folder
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
* Added new mod 'VSW_Double_60mm_Fan_Mount'
* Added new mod 'AB_Turbo_Mod'
* AB_Turbo_Mod edits
Added photos
* AB_Turbo_Mod edits
Minor changes to improve print quality
* AB_Turbo_Mod edits
Minor edits to further improve print quality
* Added step file for each mod for GPLv3 compliance
* Simplified klicky documentation
Moved all the setup to the klicky repository.
Updated the probe dock.
* removed duplicate dock
* photo links corrected
* corrected dock orientation
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* adding first version of the mod
* renaming the files to respect proper name
* fix formatting of readme
* add pics of install
* adding clarification in the readme
* readme formatting
* readme formatting
* better name and link to master readme
* table formatting fixes
Co-authored-by: Jan 'Yenda' Trmal <jtrmal@apptek.com>
* fix potential lock up with M190 override
It's common to have a slicer configured to send "M190 S0" before PRINT_START (to discourage the slicer from inserting it's own M190.) Klipper's handling of "M190 S0" is to ignore the command instead of waiting for the bed to cool to a temperature it likely will never reach. This change fixes the bedfans.cfg version of M190 to also ignore a S0 parameter (and doesn't freeze the entire printer waiting for the bed to cool to 0 degrees.)
* update
* update
* update
* update
Co-authored-by: garyd9 <garyd9@gmail.com>
* 24r2 mod updates
updated pin mod for 24r2, moved old files but moved to "old" folder
renamed and removed confusing GE5C files
added trident pin mod
* Update README.md
* renamed files
* added images
* Update README.md
* Update readme.md
* fixed printing orientation
* Update README.md
* add 4 channel relay
* Update README
* Create mods index readme at root samwiseg0 folder
* Update Main README
* Remove Pi bootscreens
* Do not remove trailing space
* Add esp8266 nodemcu din mount
* Update din clip link
* Update esp8266 mount to be universal
* Fix Din clip link
* Remove 2.4 din clip
* Update main readme
* Add link to what an esp8266/nodemcu is
* Update README to include WLED information
* Add voyager gtx din mount
* Update din clip link
* Update mount to be universal to work with trident din clip or 2.4
* Fix din clip link
* Add M2x10 to BOM
* Update Mod README & Main README
* initial pull request for Angry CAM USB module
* corrected readme.md file
* updated readme.md file and removed obsolete images
* added missing images for cable path description
* remove obsolete images
* removed spaces from all file names and added more pictures to the readme.md
* reduced number of pictures and corrected typos in ReadMe.md
* added exhaust adapter for 100mm ventilation systems
* update of ReadMe.md files to correct typos and add more mounting information
* removed space characters from names
* corrected link to *.stl file
* added newline as trigger for CI to Readme.md
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Delete Render_of_Raspberry_Pi_Zero_Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
newphreak
Gerrit Wellen
Muradir
Ryan DeShone
Obomaker3D
AndrewEllis93
RockNLol
Prasad Pandit
Rowland
Anders Samuelsen
Polar-Ted
th0mpy
baccula
Andrew
oookamiii
GalvanicGlaze
Ran Bao
Chris
Barna
slitte
Jonathan Michaelson
#2559
Richard Mitchell
Lukas
Chaoticlab
DatenThielt
Le0n
mandryd
Geoffrey Young
makealeft
Steve Peterson
ScramblerUSA
1-0-R
whi-tw
electroleon
Maple Leaf Makers
Kevin Aka Sam
Nathan
scanlory
LoganFraser
VinnyCordeiro
Chris Lee
Jot Powers
Oli Wright
Amey
elcrni
AaronHerrick
chri-kai-in
reapola
Mac10goesBRRRT
Backenfutter
cbc02009
Stephan Kohls
KiloQubit
Wile.e
jaysuk
zzp8202
tallman5
dmason1992
JoAnn Manges
johannchung
jooole
120decibell
3dconceptauvergne
filotto78
msagit
Hobson318
Tircown
Nic Eggert
dePrintinator
DaStivi
MathematicalPotato
Akio
LJ
Autocrit
Paul
Sascha Ohms
Maximilian Förg
Mike Thomas
jlas1
reQu1em00
jjgraphix
Jan "yenda" Trmal
samwiseg0
bythorsthunder
TheSquiffy
hart
Bart Lammers
Samori Gorse
tz
Damian Gola
D4rkCelerity
Keith
Mrgl-Mrgl
Dam Vu Duy
Edwin
Jeremy Ruhland
Heenne
hymness1