Added Voron SW SB CR Touch (No Tools) Mod (#791)

* Added CRTouch Mod for SW SB

Added CR Touch Mod for Voron SwitchWire with StealthBurner X-rail (MGN12)

* Fixed Image Path

* Removed LICENSE, Corrected README typos

* Corrected README typos

printer_mods/README.md

@@ -313,6 +313,7 @@ like so:
 |Phalanx |["Other" Idlers Mod](./Phalanx/Other-V2-Idlers/) | Allow usage of wider toolheads on the V2 |:x: |:grey_question: |:heavy_check_mark: |:x:|
 |piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:|
 | Polared | [Power Inlet with Keystone Insert](./Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | :heavy_check_mark: | :x: | :x: | :x: | :x:|
+| prasadp4009 | [StealthBurner CR Touch Mod](./prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | :x: | :x: | :x: | :heavy_check_mark: | :x:|
 |Polar-Ted|[V0.1 Two Piece Back Panel](./Polar-Ted/V0_Two_Piece_Back_Panel/) | Vented 2 piece back panel for V0 |:heavy_check_mark: |:x: | :x: | :x: | :x: |
 | |[V0.1 Z nozzle endstop switch](./Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/) | Sexbolt style switch for V0 |:heavy_check_mark: | :x: | :x: | :x: | :x: |
 | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: |

printer_mods/prasadp4009/SW_SB_CRTouch/README.md

@@ -0,0 +1,19 @@
+# Voron Switchwire StealthBurner CR Touch Mod
+
+This repo contains the STL for Voron SW SB CR Touch Mod.
+
+I used the SB 1.05Beta during development. But it should work on the SB v1 release as it's only X rail carriage.
+
+- The STL is only for MGN12 Carriage for SW
+- No supports are needed during the print
+- No tools are needed to fit the CR Touch, it's a **press fit**
+- I used Dragon Standard hotend for deciding height of CR touch and it's 2mm above the nozzle when pin is up
+- It should work with other hotends as well (Hotends of same form factor as Dragon)
+
+## Preview of how CR Touch Fits in the SB X rail carriage:
+
+![Full View](./images/SB_CR_FullView.png)
+
+![Exploded View](./images/SB_CR_Exploded.png)
+
+### Thanks to Voron Developers for building rocket making tools