This config also works for MKS Robin Nano V3.1.
- V0.1 example config
- MKS Eagle/Robin Nano V3.1 board pin aliases
- new README with `make menuconfig` screenshot
* Add sample printer.cfg for Fysetc Spider 2.2 for Voron Trident
* Fix comments to say Fysetc Spider instead of BTT Octopus
* Remove 'Common Temperature Sensors' section as it contained some outdated information
* Swap Left and Right Z Steppers to match Trident Manual
* Initial work for BTT SKR2
* Fix typo in file name
* Remove old file
* Beautify README
* Cleanup PINs definition
* Revert back commented stuff for build size
* Remove the Rev.B in the name
* Remove old files
* Add wiring diagram for MCU X/Y/E
* Update readme file
* Add wiring diagram for MCU Z
* Add Klipper menuconfig selection
* Change instructions order
* Merge latest updates from master
* Add line return
* Update recommended settings
* Comment out recommended sensor
* Comment bed sensor
* Use controller fan instead
* Remove old thermistor types
* Put back heater_bed
* Add heater and stepper relation for controller fans
* Remove stepper and space
Co-authored-by: Marc Bernard <marc.guy.bernard@gmail.com>
* Add fly-super8 configuration
* Add files via upload
* Add Fly Super8 board klipper cfg
* update docs url
* Add Fly-Gemini configuration and model for v0
* Repair model orientation and configuration
* Add a blank line at the end
* Add BOM and description
* Add BOM and description
* Modify * to x
Co-authored-by: kluoyun <2339883672@qq.com>
* Added a Klipper configuration and wiring diagram for the V1.8 using a FYSETC Spider 1.1 board
* Added the wiring diagram image to the readme for Spider 1.1 config on V1
* Duet 3 RRF3.1.1 example config
Work in progress example config.
* Update homez.g
* Correct homeall.g uploaded
* M566 typo corrected
* Delete old config - get ready for new
* Duet 3 6HC + 3HC example config
Still work in progrss - hasn't been cleaned yet
* Create readme.md
* Update readme.md
* Fixed macro call in homez.g
* Fixed macro call in homeall.g
* Fixing comments (with a proper github client this time).
* Fixed current on Z axis
thanks oc_geek :)
* Limit to Z axis
thanks oc_geek
* Corrected microswitch Y offset.
* Mesh macros correction
Home Z should not be needed after mesh
* Update move_over_microswitch.g
Co-authored-by: TheDorje <45540765+TheDorje@users.noreply.github.com>
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Added Articulating Raspberry Pi 7" Display Mount
* Fixed line endings in README.md
* Fixed typo in README.md
* One more time
* Cleaned up Tinker CAD model artifacts in Fusion 360
* Added BTT Octopus pin aliases config
* Added newline to the end of the config.
Please use this for reference only when converting from Duet2 RRF2 to RRF3 firmware.
(based on the Voron 2.1 firmware with all the macros and then further butchered by me.)
Minor things to note:
-Printer is 300^3
-0.9deg steppers on A/B drive and extruder.
-PT100 sensor.
Mastah
Chris Lee
Rich Edelman
technophreak
kluoyun
cbc02009
Stephen Hurd
kluoyun
Marc Pot
Matt Housh
DorjeDorf
Ray Ramirez
Joshua Longenecker
Florian Heilmann
P3D LLC
Norbs12
Benoit Miller
chron-kh
bryansj
danowar