Created and added Fysetc Spider pin aliases (#435)
* Created and added Fysetc Spider pin aliases * Changed top level readme to be alphabetical
This commit is contained in:
Marc Pot
GitHub
parent
e2628c7d96
commit
00ae703a59
|
|
@ -27,9 +27,9 @@ like so:
|
|||
|
||||
| Creator | Config title | Description | V0 | V1.8 | V2.4 | VSW |
|
||||
| --- | --- | --- | --- | --- | --- | --- |
|
||||
| revnull | [BTT Octopus Board Pins](./klipper/revnull/btt_octopus_pins) | Defines a set of `[board_pins]` aliases for use with the BTT Octopus controller | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
|
||||
| jaeger | [FYSETC Spider on V1.8](./klipper/jaeger/Spider_1.1_V1.8) | Example configuration and wiring diagram for a FYSETC Spider 1.1 board on the V1.8 | :x: | :heavy_check_mark: | :x: | :x: |
|
||||
|
||||
| MarcPot | [Fysetc Spider Board Pins](./klipper/MarcPot/fysetc_spider_pins) | Defines a set of `[board_pins]` aliases for use with the Fysetc Spider controller | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
|
||||
| revnull | [BTT Octopus Board Pins](./klipper/revnull/btt_octopus_pins) | Defines a set of `[board_pins]` aliases for use with the BTT Octopus controller | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
|
||||
---
|
||||
|
||||
## RepRapFirmware
|
||||
|
|
|
|||
|
|
@ -0,0 +1,7 @@
|
|||
# Fysetc Spider Pin Aliases
|
||||
|
||||
This file has been created by MarcPot of the 3D(IY) Printing NL/BE Community Discord server.
|
||||
It is based on the SPIDER info page on the Fysetc website at https://wiki.fysetc.com/Spider/
|
||||
|
||||
This file is made to be able to use more clear names in your klipper config for the different pins on the Fysetc SPIDER mcu.
|
||||
You can either add it to your printer.cfg or include it by using the klipper [include $PATH_TO_FILE] functionality.
|
||||
|
|
@ -0,0 +1,218 @@
|
|||
# This file has been created by MarcPot of the 3D(IY) Printing NL/BE Community Discord server.
|
||||
# It is based on the SPIDER info page on the Fysetc website at https://wiki.fysetc.com/Spider/
|
||||
|
||||
# This file is made to be able to use more clear names in your klipper config for the different pins on the Fysetc SPIDER mcu.
|
||||
# You can either add it to your printer.cfg or include it by using the klipper [include $PATH_TO_FILE] functionality.
|
||||
|
||||
# MCU SPIDER
|
||||
[board_pins]
|
||||
aliases =
|
||||
# Feature
|
||||
# Spider Pin
|
||||
# STM32 Pin
|
||||
# Pin No.
|
||||
# Comment
|
||||
# X_MOTOR(1)
|
||||
X_Step= PE11, #42
|
||||
X_DIR= PE10, #41
|
||||
X_EN= PE9, #40
|
||||
X_CS= PE7, #38
|
||||
X_PDN= X_CS, #38
|
||||
X_DIAG= PB14, #53 Share with X_MIN
|
||||
# Y_MOTOR(2)
|
||||
Y_Step= PD8, #55
|
||||
Y_DIR= PB12, #51
|
||||
Y_EN= PD9, #56
|
||||
Y_CS= PE15, #46
|
||||
Y_PDN= Y_CS, #46
|
||||
Y_DIAG= PB13, #52 Share with Y_MIN
|
||||
# Z_MOTOR(3)
|
||||
Z_Step= PD14, #61
|
||||
Z_DIR= PD13, #60
|
||||
Z_EN= PD15, #62
|
||||
Z_CS= PD10, #57
|
||||
Z_PDN= Z_CS, #57
|
||||
Z_DIAG= PA0, #23 Share with Z_MIN
|
||||
# E0_MOTOR(4)
|
||||
E0_Step= PD5, #86
|
||||
E0_DIR= PD6, #87
|
||||
E0_EN= PD4, #85
|
||||
E0_CS= PD7, #88
|
||||
E0_PDN= E0_CS, #88
|
||||
E0_DIAG= PA1, #24 Share with X_MAX
|
||||
# E1_MOTOR(5)
|
||||
E1_Step= PE6, #5
|
||||
E1_DIR= PC13, #7
|
||||
E1_EN= PE5, #4
|
||||
E1_CS= PC14, #8
|
||||
E1_PDN= E1_CS, #8
|
||||
E1_DIAG= PA2, #25 Share with Y_MAX
|
||||
# E2_MOTOR(6)
|
||||
E2_Step= PE2, #1
|
||||
E2_DIR= PE4, #3
|
||||
E2_EN= PE3, #2
|
||||
E2_CS= PC15, #9
|
||||
E2_PDN= E2_CS, #9
|
||||
E2_DIAG= PA3, #26 (Probe) Share with Z_MAX
|
||||
# E3_MOTOR(7)
|
||||
E3_Step= PD12, #39
|
||||
E3_DIR= PC4, #33
|
||||
E3_EN= PE8, #59
|
||||
E3_CS= PA15, #77
|
||||
E3_PDN= E3_CS, #77
|
||||
# E4_MOTOR(8)
|
||||
E4_Step= PE1, #34
|
||||
E4_DIR= PE0, #97
|
||||
E4_EN= PC5, #98
|
||||
E4_CS= PD11, #58
|
||||
E4_PDN= E4_CS, #58
|
||||
# TMC Driver SPI (SPI4)
|
||||
MOSI= PE14, #45
|
||||
MISO= PE13, #44
|
||||
SCK= PE12, #43
|
||||
# End_stops
|
||||
X_MIN= X_DIAG, #53 Share with X_DIAG
|
||||
X_MAX= E0_DIAG, #24 Share with E0_DIAG
|
||||
Y_MIN= Y_DIAG, #52 Share with Y_DIAG
|
||||
Y_MAX= E1_DIAG, #25 Share with E1_DIAG
|
||||
Z_MIN= Z_DIAG, #23 Share with Z_DIAG
|
||||
Z_MAX= E2_DIAG, #26 (Probe) Share with E2_DIAG
|
||||
# FAN/RGB
|
||||
FAN0= PB0, #35
|
||||
FAN1= PB1, #36
|
||||
FAN2= PB2, #37 /BOOT1
|
||||
LED_R= PB6, #92 Can be used for fan3
|
||||
FAN3= LED_R, #92 Can be used for LED_R
|
||||
LED_G= PB5, #91 Can be used for fan4
|
||||
FAN4= LED_G, #91 Can be used for LED_G
|
||||
LED_B= PB7, #93 Can be used for fan5
|
||||
FAN5= LED_B, #93 Can be used for LED_B
|
||||
5V_LED= PD3, #84 Share with flash indicator(Bootloader)
|
||||
LED_DATA= 5V_LED, #84 Share with flash indicator(Bootloader)
|
||||
# Heating
|
||||
HE_E0= PB15, #54
|
||||
HE_E1= PC8, #65
|
||||
HE_E2= PB3, #89
|
||||
HE_BED= PB4, #90
|
||||
# Temperature
|
||||
THERM0= PC0, #15 A 4.7kOhm 0.1% temperature sensor pull up resistor is used, PT1000 can be connected directly. For PT100, an amplifier board must be used.
|
||||
THERM1= PC1, #16 A 4.7kOhm 0.1% temperature sensor pull up resistor is used, PT1000 can be connected directly. For PT100, an amplifier board must be used.
|
||||
THERM2= PC2, #17 A 4.7kOhm 0.1% temperature sensor pull up resistor is used, PT1000 can be connected directly. For PT100, an amplifier board must be used.
|
||||
THERM3= PC3, #18 A 4.7kOhm 0.1% temperature sensor pull up resistor is used, PT1000 can be connected directly. For PT100, an amplifier board must be used.
|
||||
# EEPROM(4K) I2C Pin_Out
|
||||
SCL= PB8, #95 Connect to 24LC32(4K EEPROM)
|
||||
SDA= PB9, #96 Connect to 24LC32(4K EEPROM)
|
||||
# Pi_PWR/UART
|
||||
TX= PA9, #68 /TX1
|
||||
RX= PA10, #69 /RX1
|
||||
# SWD Debug
|
||||
SWDIO= PA13, #72 only used for debugging now and can be used for other purposes.
|
||||
SWCLK= PA14, #76 only used for debugging now and can be used for other purposes.
|
||||
|
||||
# EXP1 header
|
||||
# ____________________________
|
||||
# | | EXP1_1 | | EXP1_2 | |
|
||||
# | | EXP1_3 | | EXP1_4 | |
|
||||
# | | EXP1_5 | | EXP1_6 <--
|
||||
# | | EXP1_7 | | EXP1_8 | |
|
||||
# | | EXP1_9 | | EXP1_10 | |
|
||||
# ____________________________
|
||||
|
||||
EXP1_10= <5V>,
|
||||
EXP1_9= <GND>,
|
||||
EXP1_8= PD1, #82 Share with CAN_TX1 /CAN-TX1
|
||||
LCD_D7= EXP1_8, #82 Share with CAN_TX1 /CAN-TX1
|
||||
EXP1_7= PD0, #81 Share with CAN_RX1 /CAN-RX1
|
||||
LCD_D6= EXP1_7, #81 Share with CAN_RX1 /CAN-RX1
|
||||
EXP1_6= PC12, #80 /MOSI3/TX5/SDA2
|
||||
LCD_D5= EXP1_6, #80 /MOSI3/TX5/SDA2
|
||||
EXP1_5= PC10, #78 /SCK3/TX3/4
|
||||
LCD_D4= EXP1_5, #78 /SCK3/TX3/4
|
||||
EXP1_4= PD2, #83 /RX5
|
||||
LCD_RS= EXP1_4, #83 /RX5
|
||||
EXP1_3= PC11, #79 /MISO3/RX3/4
|
||||
LCD_EN= EXP1_3, #79 /MISO3/RX3/4
|
||||
EXP1_2= PA8, #67 /SCL3
|
||||
ENC1_C= EXP1_2, #67 /SCL3
|
||||
EXP1_1= PC9, #66 /SDA3
|
||||
BEEP= EXP1_1, #66 /SDA3
|
||||
|
||||
# EXP2 header
|
||||
# ____________________________
|
||||
# | | EXP2_1 | | EXP2_2 | |
|
||||
# | | EXP2_3 | | EXP2_4 | |
|
||||
# | | EXP2_5 | | EXP2_6 <--
|
||||
# | | EXP2_7 | | EXP2_8 | |
|
||||
# | | EXP2_9 | | EXP2_10 | |
|
||||
# ____________________________
|
||||
|
||||
EXP2_10= <5V>,
|
||||
EXP2_9= <GND>,
|
||||
EXP2_8= <NRST>, #14
|
||||
EXP2_7= PB10, #47 /SCL2
|
||||
SD_DET= EXP2_7, #47 /SCL2
|
||||
EXP2_6= PA7, #32 /MOSI1
|
||||
SD_MOSI= EXP2_6, #32 /MOSI1
|
||||
EXP2_5= PC7, #64 /RX6
|
||||
ENC_B= EXP2_5, #64 /RX6
|
||||
EXP2_4= PA4, #29 /CS1
|
||||
EXP2_CS= EXP2_4, #29 /CS1
|
||||
EXP2_3= PC6, #63 /TX6
|
||||
ENC_A= EXP2_3, #63 /TX6
|
||||
EXP2_2= PA5, #30 /SCK1
|
||||
EXP2_SCK= EXP2_2, #30 /SCK1
|
||||
EXP2_1= PA6, #31 /MISO1
|
||||
SD_MISO= EXP2_1#, #31 /MISO1
|
||||
|
||||
# BTT EXP-MOT Expander
|
||||
# Only use when using a BTT EXP-MOT Expander and connected correctly
|
||||
# The SPIDER or BTT EXP-MOT Expander EXP ports have to be turned around 180
|
||||
#
|
||||
# Because the SPIDER pinout image and my personal SPIDER didn't correspond, I'll describe my SPIDER EXP ports and my BTT EXP-MOT EXP ports.
|
||||
#
|
||||
#_____________________________________________________________________________________________
|
||||
# After reversing the BTT EXP-MOT ports the port opening was aimed to the outside of the board
|
||||
# and the EXP1 header was at the V-in/V-out side of the board.
|
||||
# ____________________________________________________________________________________________
|
||||
# The spider port opening were aimed at the inside of the board
|
||||
# and the EXP1 header was at the Thermistor headers side of the board.
|
||||
# ____________________________________________________________________________________________
|
||||
|
||||
# BTT - (Reversed Connector) EXP1 header --> SPIDER - EXP1 header
|
||||
# _________________________
|
||||
# | | M3DIAG | | M3RX | |
|
||||
# | | M2DIAG | | M2RX | |
|
||||
# | | M1DIAG | | M1RX <--
|
||||
# | | M3EN | | M2EN | |
|
||||
# | | GND | | NC | |
|
||||
# _________________________
|
||||
|
||||
# BTT - (Reversed Connector) EXP2 header --> SPIDER - EXP2 header
|
||||
# _________________________
|
||||
# | | M3STP | | M3DIR | |
|
||||
# | | M2STP | | M2DIR | |
|
||||
# | | M1DIR | | M1STP <--
|
||||
# | | M1EN | | NC | |
|
||||
# | | GND | | NC | |
|
||||
# _________________________
|
||||
|
||||
# MOT1_Step= EXP2_6,
|
||||
# MOT1_DIR= EXP2_5,
|
||||
# MOT1_EN= EXP2_7,
|
||||
# MOT1_CS= EXP1_6,
|
||||
# MOT1_PDN= MOT1_CS,
|
||||
# MOT1_DIAG= EXP1_5,
|
||||
|
||||
# MOT2_Step= EXP2_3,
|
||||
# MOT2_DIR= EXP2_4,
|
||||
# MOT2_EN= EXP1_8,
|
||||
# MOT2_CS= EXP1_4,
|
||||
# MOT2_PDN= MOT2_CS,
|
||||
# MOT2_DIAG= EXP1_3,
|
||||
|
||||
# MOT3_Step= EXP2_1,
|
||||
# MOT3_DIR= EXP2_2,
|
||||
# MOT3_EN= EXP1_7,
|
||||
# MOT3_CS= EXP1_2,
|
||||
# MOT3_PDN= MOT3_CS,
|
||||
# MOT3_DIAG= EXP1_1
|
||||
Loading…
Reference in New Issue