V2.2 wrench and updated klipper config (#1)
* Added new mod * Update README.md * Updated old printer.cfg
This commit is contained in:
danowar
Florian Heilmann
parent
7901071756
commit
b69a43fe7f
|
|
@ -24,6 +24,6 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
|
|||
| Creator | Config title | Description | V1.6 | V2.1 | V2.2 |
|
||||
|---------|--------------|-------------|------|------|------|
|
||||
| Chron | [SKR 1.3 TMC2208 UART Config](./klipper/Chron) | Configuration for SKR 1.3 TMC2208 UART | :x: | :heavy_check_mark: | :grey_question: |
|
||||
| Danowar | [FYSETC F6 1.3 Klipper Config](./klipper/Danowar/FYSETC_F6_V1.3_Klipper_Config) | Klipper config for a FYSETC F6 350 build. | :x: | :heavy_check_mark: | :grey_question: |
|
||||
| Danowar | [FYSETC F6 1.3 Klipper Config](./klipper/Danowar/FYSETC_F6_V1.3_Klipper_Config) | Klipper config for a FYSETC F6 350 build. UPDATED 11/14/19 | :x: | :heavy_check_mark: | :heavy_check_mark: |
|
||||
|
||||
---
|
||||
|
|
|
|||
|
|
@ -90,9 +90,9 @@ enable_pin: !ar56
|
|||
step_distance: 0.0125
|
||||
# connected to ymax on mcu_xye
|
||||
endstop_pin: ^!ar15
|
||||
position_min: -11
|
||||
position_endstop: 339
|
||||
position_max: 339
|
||||
position_min: 0
|
||||
position_endstop: 350
|
||||
position_max: 350
|
||||
homing_speed: 100
|
||||
homing_retract_dist: 5
|
||||
homing_positive_dir: true
|
||||
|
|
@ -100,17 +100,18 @@ homing_positive_dir: true
|
|||
[stepper_z]
|
||||
# connected to X on mcu_z (Front Left Stepper, from top)
|
||||
step_pin: z:ar54
|
||||
dir_pin: z:ar55
|
||||
dir_pin: !z:ar55
|
||||
enable_pin: !z:ar38
|
||||
# 1.8deg - 400 steps per mm
|
||||
step_distance: 0.00250
|
||||
# connected to zmax on mcu_z
|
||||
endstop_pin: !z:ar12
|
||||
endstop_pin: ^!z:ar12
|
||||
|
||||
# offset for nozzle to bed off z switch
|
||||
position_endstop: 1.84 ;ABS
|
||||
position_max: 340
|
||||
position_min: -1
|
||||
# position_endstop: 1.63 ;ABS ---FSR
|
||||
position_endstop: 0.12
|
||||
position_max: 335
|
||||
position_min: -5
|
||||
homing_speed: 15.0
|
||||
second_homing_speed: 3.0
|
||||
homing_retract_dist: 3.0
|
||||
|
|
@ -119,7 +120,7 @@ homing_positive_dir: false
|
|||
[stepper_z1]
|
||||
# connected to Y on mcu_z (Rear Left Stepper, from top)
|
||||
step_pin: z:ar60
|
||||
dir_pin: !z:ar61
|
||||
dir_pin: z:ar61
|
||||
enable_pin: !z:ar56
|
||||
# 1.8deg - 400 steps per mm
|
||||
step_distance: 0.00250
|
||||
|
|
@ -127,7 +128,7 @@ step_distance: 0.00250
|
|||
[stepper_z2]
|
||||
# connected to Z on mcu_z (Rear Right Stepper, from top)
|
||||
step_pin: z:ar43
|
||||
dir_pin: z:ar48
|
||||
dir_pin: !z:ar48
|
||||
enable_pin: !z:ar58
|
||||
# 1.8deg - 400 steps per mm
|
||||
step_distance: 0.00250
|
||||
|
|
@ -135,7 +136,7 @@ step_distance: 0.00250
|
|||
[stepper_z3]
|
||||
# connected to E0 on mcu_z (Front Right Stepper, from top)
|
||||
step_pin: z:ar26
|
||||
dir_pin: !z:ar28
|
||||
dir_pin: z:ar28
|
||||
enable_pin: !z:ar24
|
||||
# 1.8deg - 400 steps per mm
|
||||
step_distance: 0.00250
|
||||
|
|
@ -144,6 +145,7 @@ step_distance: 0.00250
|
|||
# ar71 not in pin map, using actual pin number
|
||||
uart_pin: PG3
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 1.0
|
||||
hold_current: 0.6
|
||||
|
||||
|
|
@ -151,6 +153,7 @@ hold_current: 0.6
|
|||
# ar73 not in pin map, using actual pin number
|
||||
uart_pin: PJ3
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 1.0
|
||||
hold_current: 0.6
|
||||
|
||||
|
|
@ -158,6 +161,15 @@ hold_current: 0.6
|
|||
# ar76 not in pin map, using actual pin number
|
||||
uart_pin: PJ5
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.2
|
||||
|
||||
[tmc2208 extruder1]
|
||||
# ar80 not in pin map, using actual pin number
|
||||
uart_pin: PE7
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.2
|
||||
|
||||
|
|
@ -165,6 +177,7 @@ hold_current: 0.2
|
|||
# z:ar71 not in pin map, using actual pin number
|
||||
uart_pin: z:PG3
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.6
|
||||
|
||||
|
|
@ -172,6 +185,7 @@ hold_current: 0.6
|
|||
# z:ar73 not in pin map, using actual pin number
|
||||
uart_pin: z:PJ3
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.6
|
||||
|
||||
|
|
@ -179,6 +193,7 @@ hold_current: 0.6
|
|||
# z:ar78 not in pin map, using actual pin number
|
||||
uart_pin: z:PE2
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.6
|
||||
|
||||
|
|
@ -186,12 +201,13 @@ hold_current: 0.6
|
|||
# z:ar76 not in pin map, using actual pin number
|
||||
uart_pin: z:PJ5
|
||||
microsteps: 16
|
||||
interpolate: False
|
||||
run_current: 0.8
|
||||
hold_current: 0.6
|
||||
|
||||
# used to force a single stepper to move. not used once setup
|
||||
[force_move]
|
||||
enable_force_move: true
|
||||
# # used to force a single stepper to move. not used once setup
|
||||
# [force_move]
|
||||
# enable_force_move: true
|
||||
|
||||
# Probe
|
||||
[probe]
|
||||
|
|
@ -199,45 +215,56 @@ enable_force_move: true
|
|||
pin: ^!z:ar2
|
||||
x_offset: 0.0
|
||||
# offset for inductive probe y direction off nozzle
|
||||
y_offset: 25.0
|
||||
y_offset: 30.0
|
||||
# offset for inductive probe in z height
|
||||
z_offset: 0.00
|
||||
speed: 2
|
||||
speed: 10
|
||||
samples: 1
|
||||
sample_retract_dist: 2.0
|
||||
|
||||
# this is required for gantry leveling and replaces your G28 command
|
||||
# with the gcode used here. Used to home X/Y/Z with mechanical switches
|
||||
[homing_override]
|
||||
set_position_z: 0
|
||||
gcode:
|
||||
BED_MESH_CLEAR
|
||||
G90
|
||||
G0 Z15 F600
|
||||
G28 X Y
|
||||
# For the FSR Switch
|
||||
G0 X227 Y-11 F3000
|
||||
G0 X225 Y350 F5000
|
||||
G28 Z
|
||||
G0 Z10 F3000
|
||||
# Clean nozzle then rezero z
|
||||
G0 Z13 F2000
|
||||
# level gantry
|
||||
quad_gantry_level
|
||||
# Clean nozzle then rezero z
|
||||
nozzle_clean
|
||||
G0 X227 Y-11 F3000
|
||||
G0 X225 Y350 F5000
|
||||
G28 Z
|
||||
G0 Z10 F3000
|
||||
G0 Z13 F2000
|
||||
#G0 X175 Y170 Z10 F3000
|
||||
|
||||
# gantry_level is to put a moving gantry into plan with
|
||||
# a fixed bed. Must have 4 steppers on the gantry
|
||||
[quad_gantry_level]
|
||||
gantry_corners:
|
||||
-46,-12
|
||||
416,396
|
||||
-59,0
|
||||
409,421
|
||||
points:
|
||||
80,60
|
||||
80,250
|
||||
270,250
|
||||
270,60
|
||||
speed: 100
|
||||
horizontal_move_z: 10
|
||||
samples: 1
|
||||
sample_retract_dist: 2.0
|
||||
30,0
|
||||
30,280
|
||||
320,280
|
||||
320,0
|
||||
# points:
|
||||
# 100,80
|
||||
# 100,230
|
||||
# 250,230
|
||||
# 250,80
|
||||
speed: 300
|
||||
horizontal_move_z: 8
|
||||
retries: 5
|
||||
retry_tolerance: 0.01
|
||||
max_adjust: 8
|
||||
|
||||
[extruder]
|
||||
# connected to E0 on mcu_xye
|
||||
|
|
@ -249,11 +276,13 @@ step_distance: 0.001803
|
|||
nozzle_diameter: 0.400
|
||||
|
||||
# PA can be disabled by declaring a 0.0 value
|
||||
pressure_advance: 0.15
|
||||
pressure_advance: 0.0
|
||||
#pressure_advance: 0.15
|
||||
# time seconds to look ahead for PA moves default is 0.010 or 10ms
|
||||
pressure_advance_lookahead_time: 0.030
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_distance: 800.0
|
||||
max_extrude_only_distance: 1000.0
|
||||
max_extrude_cross_section: 1000.0
|
||||
|
||||
# connected to E0 OUT on mcu_xye
|
||||
heater_pin: ar5
|
||||
|
|
@ -265,14 +294,33 @@ sensor_pin: analog12
|
|||
smooth_time: 3.0
|
||||
max_power: 1.0
|
||||
# PID for 230C
|
||||
control: pid
|
||||
pid_Kp: 20.097
|
||||
pid_Ki: 0.950
|
||||
pid_Kd: 106.265
|
||||
#control: pid
|
||||
#pid_Kp: 28.263
|
||||
#pid_Ki: 1.942
|
||||
#pid_Kd: 102.808
|
||||
min_extrude_temp: 0
|
||||
min_temp: 0
|
||||
max_temp: 300
|
||||
|
||||
[extruder1]
|
||||
# connected to E1 on mcu_xye
|
||||
step_pin: ar36
|
||||
dir_pin: ar34
|
||||
enable_pin: !ar30
|
||||
# 1.8deg - 555 steps per mm - 1/16 microstepping - M2
|
||||
step_distance: 0.001803
|
||||
nozzle_diameter: 0.400
|
||||
|
||||
# PA can be disabled by declaring a 0.0 value
|
||||
pressure_advance: 0.0
|
||||
#pressure_advance: 0.15
|
||||
# time seconds to look ahead for PA moves default is 0.010 or 10ms
|
||||
pressure_advance_lookahead_time: 0.030
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_distance: 1000.0
|
||||
max_extrude_cross_section: 1000.0
|
||||
shared_heater: extruder
|
||||
|
||||
# thermally controlled hotend fan
|
||||
[heater_fan my_nozzle_fan]
|
||||
# connected to FAN0 on mcu_z
|
||||
|
|
@ -283,39 +331,27 @@ heater: extruder
|
|||
heater_temp: 50.0
|
||||
fan_speed: 1
|
||||
|
||||
# # thermally controlled electronics bay cooling fans
|
||||
# [heater_fan cpu_fan]
|
||||
# # connected to FAN2 on mcu_xye
|
||||
# pin: ar46
|
||||
# max_power: 1.0
|
||||
# kick_start_time: 0.500
|
||||
# heater: extruder
|
||||
# heater_temp: 50.0
|
||||
# fan_speed: 1
|
||||
|
||||
# manually controlled electronics bay cooling fans
|
||||
[output_pin cpu_fan]
|
||||
# thermally controlled electronics bay cooling fans
|
||||
[heater_fan cpu_fan]
|
||||
# connected to FAN2 on mcu_xye
|
||||
pin: ar46
|
||||
pwm: True
|
||||
value: 1
|
||||
shutdown_value: 0
|
||||
max_power: 1.0
|
||||
kick_start_time: 0.500
|
||||
heater: extruder
|
||||
heater_temp: 50.0
|
||||
fan_speed: 1
|
||||
|
||||
# manually controlled stepstick cooling fans
|
||||
[output_pin z_driver_fan]
|
||||
# connected to FAN1 on mcu_z
|
||||
pin: z:ar45
|
||||
pwm: True
|
||||
value: 1
|
||||
shutdown_value: 0
|
||||
# stepstick cooling fans
|
||||
[multi_pin driver_fans]
|
||||
# connected to FAN1 on each mcu
|
||||
pins: z:ar45, ar45
|
||||
|
||||
# manually controlled stepstick cooling fans
|
||||
[output_pin xye_driver_fan]
|
||||
# connected to FAN1 on mcu_exy
|
||||
pin: ar45
|
||||
pwm: True
|
||||
value: 1
|
||||
shutdown_value: 0
|
||||
[controller_fan CPU_Fans]
|
||||
pin: multi_pin:driver_fans
|
||||
max_power: .5
|
||||
heater: extruder, heater_bed
|
||||
cycle_time: 0.010
|
||||
hardware_pwm: True
|
||||
|
||||
# manually controlled chamber exhaust (SET_PIN PIN=chamber_fan VALUE=1)
|
||||
[output_pin chamber_fan]
|
||||
|
|
@ -324,6 +360,18 @@ pin: z:ar46
|
|||
pwm: True
|
||||
value: 0
|
||||
shutdown_value: 0
|
||||
cycle_time: 0.010
|
||||
hardware_pwm: True
|
||||
|
||||
# manually controlled hotend light (SET_PIN PIN=hotend_light VALUE=1)
|
||||
[output_pin HOTEND_LIGHT]
|
||||
# connected to HEATER1 on mcu_xye
|
||||
pin: ar6
|
||||
pwm: True
|
||||
value: 0.5
|
||||
shutdown_value: 0
|
||||
cycle_time: 0.010
|
||||
hardware_pwm: True
|
||||
|
||||
# bed heater configuration
|
||||
[heater_bed]
|
||||
|
|
@ -349,7 +397,8 @@ max_temp: 120
|
|||
# connected to FAN0 on mcu_xye
|
||||
pin: ar44
|
||||
max_power: 1.0
|
||||
kick_start_time: 0.500
|
||||
kick_start_time: 1.00
|
||||
hardware_pwm: true
|
||||
|
||||
[printer]
|
||||
# settings below are the max and can't be commanded over in gcode
|
||||
|
|
@ -369,6 +418,19 @@ square_corner_velocity: 10.0
|
|||
# cornering velocity. If this is set to zero then the toolhead will
|
||||
# decelerate to zero at each corner. The default is 5mm/s.
|
||||
|
||||
[bed_mesh]
|
||||
speed: 100
|
||||
horizontal_move_z: 10
|
||||
min_point: 25,0
|
||||
max_point: 325,295
|
||||
probe_count: 7,7
|
||||
fade_end: 10
|
||||
split_delta_z: .01
|
||||
move_check_distance: 3
|
||||
mesh_pps: 2,2
|
||||
algorithm: lagrange
|
||||
relative_reference_index: 24
|
||||
|
||||
[idle_timeout]
|
||||
# high motor off time so I don't have to relevel gantry often
|
||||
timeout: 600000
|
||||
|
|
@ -380,9 +442,7 @@ timeout: 600000
|
|||
[gcode_macro g32]
|
||||
gcode:
|
||||
G28
|
||||
quad_gantry_level
|
||||
quad_gantry_level
|
||||
quad_gantry_level
|
||||
#quad_gantry_level
|
||||
|
||||
|
||||
# macro to level the gantry. use G32 in the terminal to call
|
||||
|
|
@ -400,43 +460,31 @@ gcode:
|
|||
# change for your starting scripting needs
|
||||
[gcode_macro print_start]
|
||||
gcode:
|
||||
#G21 ; set units to mm
|
||||
#G90 ; use absolute coordinates
|
||||
#T0 ; select tool 0
|
||||
#G92 E0.0 ; reset e count
|
||||
#M220 S100 ; reset speed multiplier
|
||||
|
||||
#M140 S[first_layer_bed_temperature] ; set bed temperature and do not wait
|
||||
#M109 S190 ; set print head temperature and wait
|
||||
#M190 S[first_layer_bed_temperature] ; set bed temperature and wait
|
||||
|
||||
G28 ; home printer
|
||||
quad_gantry_level ; final level check
|
||||
#G28 ; home printer
|
||||
G28 Z ; rehome just z after gantry level
|
||||
G0 Z10 F3000
|
||||
G0 X175 Y170 F3000
|
||||
G28 ; home printer
|
||||
G91
|
||||
G1 E15.00 F1000
|
||||
G90
|
||||
G0 X175 Y170 Z10 F3000
|
||||
|
||||
|
||||
# Use print_end for you slicer ending script
|
||||
[gcode_macro print_end]
|
||||
gcode:
|
||||
G91 ;relative positioning
|
||||
G1 E-5.00 F1000 ;retract 5mm of filament
|
||||
G1 E-15.00 F1000 ;retract 5mm of filament
|
||||
G1 Z+1.00 X-20.0 Y-20.0 F20000 ;short quick move to disengage from print
|
||||
G1 Z+10.00 F20000 ;move Z-Axis 10mm away from part
|
||||
|
||||
G90 ;absolute positioning
|
||||
G1 X350 Y339 ; move to back corner
|
||||
|
||||
#G91 ; relative positioning
|
||||
#G1 E-8.00 F500 ;retract additional filament to prevent oozing
|
||||
#G90 ;absolute positioning
|
||||
|
||||
M104 S0 ;turn off hotend
|
||||
M140 S0 ;turn off heatbed
|
||||
M106 S0 ; shut off blower
|
||||
G90 ;absolute positioning
|
||||
G1 X350 Y339 ; move to back corner
|
||||
|
||||
M104 S0 T0 ;turn off hotend
|
||||
M104 S0 T1 ;turn off hotend
|
||||
M104 S0 ;turn off hotend
|
||||
M140 S0 ;turn off heatbed
|
||||
M106 S0 ; shut off blower
|
||||
T0
|
||||
|
||||
# Set Temps for ABS Warmup
|
||||
[gcode_macro abs_warmup_temp]
|
||||
gcode:
|
||||
|
|
@ -452,33 +500,66 @@ gcode:
|
|||
[gcode_macro nozzle_clean]
|
||||
gcode:
|
||||
G1 Z10 F3000 ;lift nozzle 25mm
|
||||
G1 X80 Y-4 F7500 ;move to nozzle brush
|
||||
G1 Z5 F3000 ;move nozzle into brush
|
||||
G1 X120 Y-11 F6000 ;scrub
|
||||
G1 X80 Y-4 F6000 ;scrub
|
||||
G1 Y-11 F6000 ;move
|
||||
G1 X120 Y-4 F6000 ;scrub
|
||||
G1 X80 Y-11 F6000 ;scrub
|
||||
G1 Y-4 F6000 ;move
|
||||
G1 X120 Y-11 F6000 ;scrub
|
||||
G1 X80 Y-4 F6000 ;scrub
|
||||
G1 Y-11 F6000 ;move
|
||||
G1 X120 Y-4 F6000 ;scrub
|
||||
G1 X80 Y-11 F6000 ;scrub
|
||||
G1 Y-4 F6000 ;move
|
||||
G1 Z10 F3000 ;lift z 10mm
|
||||
G1 X70 Y350 F9000 ;move to nozzle brush
|
||||
G1 Z1 F3000 ;move nozzle into brush
|
||||
G1 X135 F9000 ;scrub
|
||||
G1 X70 F9000 ;scrub
|
||||
G1 X135 F9000 ;scrub
|
||||
G1 X70 F9000 ;scrub
|
||||
G1 X135 F9000 ;scrub
|
||||
G1 X70 F9000 ;scrub
|
||||
G1 X135 F9000 ;scrub
|
||||
G1 Z10 F3000 ;lift z 10mm
|
||||
#G1 X175 Y170 F9000 ;move nozzle to center
|
||||
|
||||
|
||||
# Tool 0 Filament Load - Only runs when hot
|
||||
[gcode_macro load_primary]
|
||||
gcode:
|
||||
{% if printer.extruder0.temperature > 185 %}
|
||||
G91
|
||||
G1 E825 F10000
|
||||
G1 E15 F150
|
||||
G90
|
||||
{% endif %}
|
||||
|
||||
# Tool 0 Filament Unload - Only runs when hot
|
||||
[gcode_macro unload_primary]
|
||||
gcode:
|
||||
{% if printer.extruder0.temperature > 185 %}
|
||||
G91
|
||||
G1 E10 F300
|
||||
G1 E-835 F10000
|
||||
G90
|
||||
{% endif %}
|
||||
|
||||
# Tool 1 Filament Load - Loads to pre tool change position (-100mm)
|
||||
[gcode_macro load_secondary]
|
||||
gcode:
|
||||
T1
|
||||
G91
|
||||
G1 E725 F10000
|
||||
G90
|
||||
T0
|
||||
|
||||
# Tool 1 Filament Unload
|
||||
[gcode_macro unload_secondary]
|
||||
gcode:
|
||||
T1
|
||||
G91
|
||||
G1 E-725 F10000
|
||||
G90
|
||||
T0
|
||||
|
||||
# Macro to Babystep Up 0.02mm
|
||||
[gcode_macro babystep_up]
|
||||
gcode:
|
||||
SET_GCODE_OFFSET Z_ADJUST=0.02
|
||||
|
||||
SET_GCODE_OFFSET Z_ADJUST=0.02 move=1
|
||||
|
||||
# Macro to Babystep Down 0.02mm
|
||||
[gcode_macro babystep_down]
|
||||
gcode:
|
||||
SET_GCODE_OFFSET Z_ADJUST=-0.02
|
||||
|
||||
SET_GCODE_OFFSET Z_ADJUST=-0.02 move=1
|
||||
|
||||
# BED_MESH_CALIBRATE: Perform Mesh Bed Leveling
|
||||
# BED_MESH_CLEAR: Clear the Mesh so no z-adjusment is made
|
||||
# BED_MESH_MAP: Probe the bed and serialize output
|
||||
|
|
@ -503,3 +584,9 @@ gcode:
|
|||
# STEPPER_BUZZ: Oscillate a given stepper to help id it
|
||||
# UNLOAD_FILAMENT: G-Code macro
|
||||
# Z_TILT_ADJUST: Adjust the Z tilt
|
||||
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 23.580
|
||||
#*# pid_ki = 1.131
|
||||
#*# pid_kd = 122.910
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 472 KiB |
Binary file not shown.
|
|
@ -0,0 +1,8 @@
|
|||
# Wrench for 2.2 Knobs and Panel Clips
|
||||
|
||||
### Overview
|
||||
|
||||
|
||||
Two sided wrench for tightening knobs on the Voron 2.2 Z Drive and A/B Drives.
|
||||
Purpose of this wrench is to assist with gripping the knobs, NOT for over-torquing
|
||||
them. Please follow guidelines in manual for proper tightness.
|
||||
|
|
@ -34,6 +34,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
|
|||
| | [Load Cell Spool Holder](./Danowar/Load_Cell_Spool_Holder)| Spool holder with built in weight scale|:x: |:heavy_check_mark: |:heavy_check_mark: |
|
||||
| | [TL 2-to-1 Mosquito Toolhead Adapter](./Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter)| Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
|
||||
| | [Tablet mount](./Danowar/Tablet_Mount)|Detachable mount for tablet using magnets |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark: |
|
||||
| | [V2.2 Wrench](./Danowar/V2.2_Wrench)|3 sided wrench for 2.2 bearing caps and panel clips |:x: |:x: | :heavy_check_mark: |
|
||||
| daveidmx| [30mm Fan Adapter](./daveidmx/VORON2)|30mm Fan Adapter | :grey_question:| :grey_question:|:grey_question: |
|
||||
|Dunar |[Panel Rest](./Dunar/Panel_Rest) | External panel holder | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
|
||||
|etherwalker |[Pi Zero Camera Mount](./etherwalker/Pi_Zero_Camera_Mount) | Pi Zero Camera Mount| :grey_question:| :grey_question:|:grey_question: |
|
||||
|
|
|
|||
Loading…
Reference in New Issue