* Delete 1_coal_for_infill_mesh.stl
New coal container with lid.
* Delete 1_coal_with_mesh.stl
New coal container with lid.
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before. Many thanks to Kevin Rahhal!
* Delete Lid.stl
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before. Many thanks to Kevin Rahhal!
* New coal container with lid.
A new coal container with lid to avoid mess when moving the printer. The printing instructions are still the same as before.
* Delete VEFACH.step
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
With a new coal container with lid to avoid mess when moving the printer.
* Create README.md
ADXL345 skirt keystone with 2 and 4pin microfit 3.0 connectors. I used what I had laying around.
It's based on alchemyEngine's iteration of the g-code buttons. You can also see how to use it there.
https://github.com/alchemyEngine/EnragedRabbitProject/tree/main/usermods/Skirt-Microfit-Inserts
* Add files via upload
* Create adxl345_skirt_keystone
* Fix skirt keystone
* Update README.md
* Update skirt.keystone.adxl345.jpg
* Update README.md
* Split parts
Update stl's
* Update README.md
Fixed typo's
* Initial commit
* Update README.md
Add zeh new mount to the list
* rename
* yes? no?
bettererer pictures
* Update README.md
Initial description
* Update README.md
Nope. Not a pro at this. It'll work.
* Alphabetical, Biblical, and so on
* Update README.md
Minor wording
* Fix readme
* Update again with correct list
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Add V0.1 skirt buttons
Add V0.1 buttons for spec skirts with 10 common pictograms
* V0.1 skirt buttons - fix typo
Fix typo in the readme
* V0.1 skirt buttons - escape button name
V0.1 skirt buttons - escape button name
* Fix typo and Trident column
Following KiloQubit comments:
- fix the typo in the readme of the mod
- add the cross in the Trident column
* Motor Panel Modification to keep umbilical safe
* Add Motor Panel Modification
* Fix type Motor Panel
* Fixed orientation of STL and removed 3MF
* Fixed typo bowtub -> reverse bowden tube
* Move filament panel latch into main VoronUsers repo
* Should work with anything 2020 extrusion based
* Modify the correct line
* A few tweaks
Spotted while adjusting a v0.1 variant
More clearance for the middle hinge vs hinge body
More chamfers to make it easier to insert filament
Outer hinge clearance from frame
Slight kick back to encourage latch not to pinch panel
* Add assembly image after feedback from user
* Improve description
Had feedback that people were searching for "quick release" so added that the name
* Assembly gif
* Remove old assembly
* Reworded and made space for the 1515 latch that I'll do as a separate PR
* Create readme.md
* Add files via upload
* Delete Cowling_Dragon_v3.stl
* Create readme.md
* Add files via upload
* Update readme.md
* Create readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Update readme.md
* Pinda Probe mount for the miniAB toolhead.
* Rename printer_mods/MrDespair/readme.md to printer_mods/MrDespair/MiniAB_Pinda/readme.md
* File Organization
File Organization so that it's actually in a subfolder
* Update readme.md
Added some printer.cfg info.
* Update README.md
Added my mod's info to the table.
* Delete Cowling_Dragon_v3.stl
Replacing this with an STL that has the correct orientation.
* Add files via upload
Reuploading the STL with it oriented in the correct orientation to print easily.
* Add files via upload
Add a picture of the mount in action.
* Update readme.md
Adding one more picture to the readme
* Update README.md
Added ❌ to the Trident Column.
* Update readme.md
Changed VO.1 to V0.1
* Update Cowling_Dragon_v3.stl
Repaired manifold errors (and then confirmed that it opens without errors).
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* initial pull request for Angry CAM USB module
* corrected readme.md file
* updated readme.md file and removed obsolete images
* added missing images for cable path description
* remove obsolete images
* removed spaces from all file names and added more pictures to the readme.md
* reduced number of pictures and corrected typos in ReadMe.md
* Create README.md
A modified version of the z_carriage_stop that allows pass through of the wires such as the Neopixel light bars.
This is a direct replacement for the stock z_carriage_stop part.
* Update README.md
* Added modified z carriage stop
* Adding images
* Modified Z Carriage Stop for wire pass through
* Correct file names
Remove spaces in files names
* Klicky Probe Update
Updated Klicky Probe to the latest version
* removed some filename spaces
* some more filename corrections
* Added pressfit helper parts
* added Trident as supported
* some corrections
white space in the file names corrected
file corrections to allow easier printing
* removed duplicates & more spaces
* typos and errors corrections
* link error corrected
* uppercase corrections
* Initial commit of ABBN for 4020
* corrected format error
* Update Readme.md
adding an extra line after the headings so they hopefully appear as headings.
* updating readme for 5015 and 4020 abbn
these are also compatible with trident and VSW
* fixing issues with stl name, readme, and adding in Rapido support
In addition to fixing the naming issues, and readme issues, I am adding in support for Phaetus Rapido.
* Update README.md
adding Rapido to description in readme
* fixing rapido stls
These are required but not mentioned in the BOM. The mount mentioned says 8mm M3 screws are required but I found those to be too short, so I mentioned 10-12mm. Happy to change it if preferred.
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
* Added printhead_rear_v1.1
The new printhead_rear keeps the hotend rigid
* Updated readme
Nova is coming out with v1.2 so I updated readme to specify v1.1
* add lgx
* add new information
* adjustments
* tyop
* add LGX to top level...
* spider bracket works with trident
* add LGX models
* add LGX model
* tyop
* fix tyop
* add toc, call out Nemgra's work a bit more
* change to proper gear_ratio (thanks to @KiloQubit!)
* resolve conflicts
* fix tyop (again)
* one last tweak
* Rough and ready back plate design
* Fix incorrect image markdown
* Add newline
* Words, use the right words
* Improved CAD, many depths, better instructions
* Add blanking plate to readme
* Missing newline
* Fix PR - 4mm version and typos
Must have been tired
* Add MGN12 Euclid mount, based on Trident carriage
* Add Trident check mark, and update readme to link to docks
* I always mess up markdown links like that
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* Updated based on PR comments
* Updated STL so it doesnt hit the bed
* Utility Belt
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Removing mods
* Removed links
* First commit so I can see the README
* Finished instructions and added STL files
* Update README.md
* Update README.md
* Update README.md
Images were stretch funny on mobile, remove the height=<> argument to try to fix that
* Fix overhang greater than 45 degrees
* Found a few more overhangs that needed fixing
* Work in progress (so no index link) for ADXL mount
* Fix readme
* Fix readme some more
* Untested prints
Clearance for electronics cover
Board closer to motor giving more wire clearance
Cleaned up CAD
Suggested JST XH
* Update CAD and fix readme
* Reorientation and re-exporting
* Should stop fiddling - added extra support bracket for chain
* Integrating with main CAD noticed there wasn't space for cover
* Update CAD image with latest design
* Add hardware to cad
* Add clearance image and design process
* Adafruit variant - untested
* Add adafruit mentions
* Add to readme for PR
* Finish of ADXL readme
* Remove WIP from ADXL readme
* Fix orientation which largely seems to be a matter of chance in Fusion 360
* PR Changes
Reduced overhang, by also removing attempt to use M3 threaded inserts for a 2.5mm through hole in the Adafruit board
* Fix readme some more
* Update AB-BN-30_Hotend-E3D_REVO-front.stl
fixing a problem in the revo-fron stl
* Update AB-BN-30_Hotend-E3D_REVO-front.stl
tried to fix the geometry issue (fingers crossed!)
Autocrit
Kevin Aka Sam
jlas1
Dr. Stefan Schimanski
splitified
3vilson
aTinyShellScript
Alexander Þór
MCMBen
hart
jappaj
Tiago Barata
Adam Demuri
Nathan
Antoine Cellerier
Amarpal89
newphreak
Tircown
Kosh42
kyleisah
camerony
Richard Mitchell
DrDespa1r
Scotty Orr
Geoffrey Young
DorjeDorf
Akio
chri-kai-in
gen2eng
AaronHerrick
Chris Lee
Ryan Wilson
hymness1
JoAnn Manges
beaugalbraith
bythorsthunder
Slidr666
Frank Tackitt
Thiago Locatelli
hergtoler
kluoyun