MiniAB Pinda Probe Mount (#535)

* Create readme.md

* Add files via upload

* Delete Cowling_Dragon_v3.stl

* Create readme.md

* Add files via upload

* Update readme.md

* Create readme.md

* Add files via upload

* Update readme.md

* Update readme.md

* Create readme.md

* Add files via upload

* Update readme.md

* Pinda Probe mount for the miniAB toolhead.

* Rename printer_mods/MrDespair/readme.md to printer_mods/MrDespair/MiniAB_Pinda/readme.md

* File Organization

File Organization so that it's actually in a subfolder

* Update readme.md

Added some printer.cfg info.

* Update README.md

Added my mod's info to the table.

* Delete Cowling_Dragon_v3.stl

Replacing this with an STL that has the correct orientation.

* Add files via upload

Reuploading the STL with it oriented in the correct orientation to print easily.

* Add files via upload

Add a picture of the mount in action.

* Update readme.md

Adding one more picture to the readme

* Update README.md

Added ❌ to the Trident Column.

* Update readme.md

Changed VO.1 to V0.1

* Update Cowling_Dragon_v3.stl

Repaired manifold errors (and then confirmed that it opens without errors).

Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>

printer_mods/MrDespair/MiniAB_Pinda/CAD/readme.md

@@ -0,0 +1 @@
+Here are some .step files in case you want to modify things. Good luck!

printer_mods/MrDespair/MiniAB_Pinda/Images/readme.md

@@ -0,0 +1 @@
+Here are some pictures to enjoy!

printer_mods/MrDespair/MiniAB_Pinda/STLs/readme.md

@@ -0,0 +1 @@
+Files to print

printer_mods/MrDespair/MiniAB_Pinda/readme.md

@@ -0,0 +1,61 @@
+Mini Afterburner Pinda Probe Mount
+==============================
+
+A modified dragon toolhead cowling to mount a pinda (or superpinda, or vinda) probe to your V0.1! (Mosquito will come someday if I get this working). 
+
+BOM
+---
+
+- 1x Some kind of Pinda probe. Looking for something that's about 8mm diameter. Ideally you'd get a superpinda or vinda probe, the temperature drift with a standard style pinda v2 probe is wild and makes it hard to use if you don't preheat your chamber (in addition to your bed and hotend!). 
+- 1x M2x8 self tapping screw. Head is countersunk for a Flat Head style screw, but a BHCS should work too, there's clearance for it to stick out. 
+- Everything else you'd need for a standard Dragon MiniAB toolhead. 
+
+
+Instructions
+------------
+
+- Print the new toolhead
+- Install it on your V0.1, I wired up the ground and signal pin to my z-endstop port and the 5v to the bltouch port on my skr mini e3 v2. 
+- Install the pinda probe and tighten it down and follow the probe calibrate guide here: https://www.klipper3d.org/Probe_Calibrate.html
+- My offsets wound up being x_offset: -30.7 and y_offset: -13, but you should double check on your own machine just to be safe!
+- I've been using just the superPinda as my endstop and bedmesh using the following settings in my printer.cfg: 
+
+```
+[probe]
+pin: PC14
+#z_offset: 2.345
+x_offset: -30.7
+y_offset: -13
+samples: 3
+speed: 100
+samples_tolerance: 0.010
+samples_tolerance_retries: 4
+
+[bed_mesh]
+speed: 250
+horizontal_move_z: 5
+mesh_min: 15,10
+mesh_max: 89, 105
+#mesh_pps: 2,3
+move_check_distance: 3.0
+split_delta_z: .01
+probe_count: 5,5
+algorithm: bicubic
+relative_reference_index: 12
+
+# ~~~probe homing~~~
+[safe_z_home]
+home_xy_position: 60,60
+speed: 100
+z_hop: 15
+z_hop_speed: 5
+```
+
+
+Images
+------
+![CAD](Images/CAD1.png)
+![CAD](Images/cad2.png)
+![CAD](Images/cad3.png)
+![CAD](Images/ProbeInAction.jpg)
+

printer_mods/README.md

@@ -209,6 +209,7 @@ like so:
 |Mosher|[Door hinges with M3 screws shafts](./mosher/m3_door_hinges) |Simple mod of print in place door hinges, which uses m3 screws as shafts. |:x:|:x:|:heavy_check_mark:|:x:|
 |mpfl |[V0.1 OLED-skirt](./mpfl/V0.1_skirt_OLED) |V0.1 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
 |MrBean66| [SKR Pro DIN Mount](./MrBean66/SKR_PRO_Mount/) |Simple mod to mount the SKR Pro board from BTT to a DIN rails. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
+|MrDespair| [MiniAB Pinda Probe Mount](./MrDespair/MiniAB_Pinda/) |Replacement MiniAB Cowling to add a mount for a Pinda style probe. |:heavy_check_mark:|:x:|:x:|:x:|:x:|
 |MSiemons| [Tophat Hinge V0](./MSiemons/TophatHingeV0.1)| Simple hinge for V0 Tophat  |:heavy_check_mark:|:x:|:x:|:x:|
 |Nashuar|[V0 Dragon Toolhead M2.5x8](./Nashuar/V0_Dragon_ToolheadStockScrews) |This toolhead uses the stock M2.5 screw that came with the dragon hotend |:heavy_check_mark:|:x:|:x:|:x:|
 |natewalck |[V1.8 Jigs](./natewalck/v1.8_Jigs) |Jigs for assembling V1.8 |:x: |:heavy_check_mark: |:x: |:x:|