Tridentified V2.4 Power Inlet - Side mounted power inlet like Trident (#528)

* Initial upload

* Update readme.md

* Update README.md

* Update README.md

* Update README.md

Appended trident column marking, Altered readme to credit to myself as author requested by @edwardyeeks

* Added credit to author at request of @edwardyeeks

* Update README.md

Added myself as author on readme table

* Revert "Update README.md"

This reverts commit 12557b3293.

* Fix link

Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>

printer_mods/README.md

@@ -103,6 +103,7 @@ like so:
 | |[LED Bar Clip](./eddie/LED_Bar_Clip) |Modular LED Clip for mounting LED Strip to 2020 Extrusions |:x: |:heavy_check_mark: |:heavy_check_mark:|:x:|:heavy_check_mark:|
 |edwardyeeks |[Decontaminator Purge Bucket & Nozzle Scrubber](./edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber) |Removeable purge bucket with nozzle scrubber |:x: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | |[V2.4 Z Drive Motor Tensioner Mod](edwardyeeks/V2.4_z_drive_motor_tensioner_mod) |Braced motor tensioner for z drive |:x: |:x: |:heavy_check_mark: |:x:|
+| |[Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) |Trident style side power inlet for V2.4 using Z Drive Motor Tensioner Mod - By @Amarpal89 |:x: |:x: |:heavy_check_mark: |:x:|:x:|
 | Ellis |[15x15 Drag Chain Ends](./Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end pieces | :grey_question: | :grey_question: |:heavy_check_mark: |:grey_question:|
 | |[Badge Retractor Mount](./Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the way. | :grey_question: | :grey_question: |:heavy_check_mark: |:x:|
 | |[Bed Fans](./Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | :x: | :x: |:heavy_check_mark: |:x:|

printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/readme.md

@@ -0,0 +1,23 @@
+<div style="text-align: right"><sub>A Team Dropbear Production</sub></div>
+<img align="right" width="100" height="100" src="images/db.png">
+
+## Tridentified V2.4 Power Inlet - by [@Amarpal89](https://github.com/Amarpal89)
+### Trident style side plug skirts for V2.4 to suit Edwardyeeks z-drive tensioner mod
+![Model.png](images/Model.png)
+
+**These skirts are only compatible with Edwardyeeks V2.4 z-drive Tensioner Mod [Found Here](../V2.4_z_drive_motor_tensioner_mod)**
+
+### **250:**
+
+``RightSkirt_250.stl`` + ``PlugSkirt_250_*.stl`` Replace the plug panel and both stock rear skirts.
+
+### **300 & 350:**
+
+``PlugSkirt_3x0.stl`` + ``FillSkirt.stl`` + [right side skirt from Eddie's mod]
+
+``*_Filtered.stl`` is for filtered inlet with separate switch.  
+``*_adamstech.stl`` is for single piece combination switch and inlet as per trident plug panel.  
+``*_single.stl`` is for single piece combination switch and inlet as per original V2.4 plug panel.
+
+Use the accent logo insert from trident stl's if you want a coloured logo on the rear fillskirt of 300/350 builds.  
+Want the inlet on the right instead of left? Then mirror the plug skirt.