Z Belt Cover Mod (#539)

printer_mods/Akio/cable_routing_z_belt_cover/README.md

@@ -0,0 +1,42 @@
+# Hidden cable routing z belt cover mod
+## Credit
+Mod based on the design of the Voron crew.
+Thank you for your awesome work!
+## Print settings
+As stated in the Voron documentation:
+* ABS
+* 0.2mm layer hight
+* 0.4mm extrusion width
+* 40% infill
+* wall count 4
+* top/bottom layers 5
+* no supports
+
+## Bom
+Only the printed file.
+## Improvement
+Added the possibility to route cables on the bottom of the cover.
+## Description
+I liked the design of the old Voron 2.2 covers more than the current design so I based my mod on them.
+
+This mod allows to route cables that are hidden in the extrusions to the bottom compartment.
+To achieve that the inner part of the z belt cover is a bit thicker and a path is cut out on the bottom where cables can be routed. The overall dimensions are the same as the stock 2.2 covers.
+
+Note: Be careful to restrict the cable in the bottom compartment so it does not rub on your z-belts.
+## Pictures
+Top:
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_img_0.png)
+&nbsp;<br/>
+Bottom with path for routing cables:
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_img_1.png)
+&nbsp;<br/>
+Cable routing:
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_img_3.jpg)
+&nbsp;<br/>
+
+Closed:
+
+![z belt cover](img/cable_routing_z_belt_cover_mod_img_2.jpg)

printer_mods/README.md

@@ -36,6 +36,7 @@ like so:
 ||[Raspberry Pi DIN mount](./aeresov/Raspberry_Pi_DIN_mount)|A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:|
+|Akio| [Hidden cable routing z belt cover](./Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | :x: | :x: | :heavy_check_mark: | :x: | :x: |
 |alanho|[BTT PITFT50 v2 Mount](./alanho/BTT_PITFT50_v2_Mount)|A mount for the BTT PITFT50 v2 Touch Display |:x:|:grey_question:|:heavy_check_mark:|:x:|
 |albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:|
 |al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:|