Hartk ge5c (#439)

* GE5C and Sexbolt mod addition

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update readme.md

* Update README.md

* Update README.md

* Update readme.md

printer_mods/README.md

@@ -129,15 +129,17 @@ like so:
 | Gizzle | [Ender 3 and Ender 3 Pro Switchwire Mod](./Gizzle/ender-3_(pro)_switchwire)| Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. | :x: | :x: | :x: | :heavy_check_mark: |
 | GSL12 | [Pocketwatch Nema 17](./GSL12/pocketwatch_nema17)| Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. | :grey_question: | :grey_question: | :grey_question: |:x:|
 | hhammarstrand | [Afterburner connector cover for 42STH20-1004AS](./hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | :x: | :x: | :x: | :heavy_check_mark: |
-| hartk1213 | [Voron0 deck panel with logo and VORON0](./hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name VORON0 | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 display dualcolor](./hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 C14Inlet](./hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts  | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 Hinged Top Hat](./hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on  | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 ExtendedLegs](./hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more  | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 ExtrusionSkirt](./hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom   | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron0 MGN9C X Axis](./hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0  | :heavy_check_mark:| :x: | :x: |:x:|
-| | [Voron2.4 Pins Mod](./hartk1213/Voron2.4_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins  | :x:| :x: | :heavy_check_mark: |:x:|
-| | [Voron2.4 Y Endstop Relocation](./hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece, to work with Arkeets MGN12 mod  | :x:| :x: | :heavy_check_mark: |:x:|
+| hartk1213 | [Voron0 deck panel](./hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name VORON0 | :heavy_check_mark:| :x: | :x: |:x:|
+| | [Voron0 display dualcolor](./hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | :heavy_check_mark:| :x: | :x: |:x:| :x:| 
+| | [Voron0 C14Inlet](./hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts  | :heavy_check_mark:| :x: | :x: |:x:|:x:| 
+| | [Voron0 Hinged Top Hat](./hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on  | :heavy_check_mark:| :x: | :x: |:x:|:x:| 
+| | [Voron0 ExtendedLegs](./hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more  | :heavy_check_mark:| :x: | :x: |:x:|:x:| 
+| | [Voron0 ExtrusionSkirt](./hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom   | :heavy_check_mark:| :x: | :x: |:x:|:x:| 
+| | [Voron0 MGN9C X Axis](./hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0  | :heavy_check_mark:| :x: | :x: |:x:|:x:| 
+| | [Voron2.4 Pins Mod](./hartk1213/Voron2.4_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins  | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | 
+| | [Voron2.4 Y Endstop Relocation](./hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece, to work with Arkeets MGN12 mod  | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | 
+| | [Voron2.4 GE5C](./hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal spherical bearing  | :x:| :x: | :heavy_check_mark: |:x:|:x:| 
+| | [Voron2.4 SexBolt ZEndstop](./hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style| :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: |
 | henrikssn | [Plug Panel Mod for Generic Unfiltered Modules](./henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm cutout such as the Delta 06A2 and Qualtek 761-18 | :x: | :x: | :heavy_check_mark: | :x:|
 | | [Parametric Spool Holder](./henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | :x: | :heavy_check_mark: | :heavy_check_mark: |:x:  | :heavy_check_mark:|
 | hergtoler | [Exhaust Housing for 120mm Fan and 4in Duct](./hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | :x: | :x: | :heavy_check_mark: | :x: | :x: |

printer_mods/hartk1213/Voron2.4_GE5C/readme.md

@@ -0,0 +1,54 @@
+# Voron 2.4 GE5C Z joint  
+
+
+##
+
+### BOM
+Screws			
+|Size|Qty|
+|---|---|		
+|M3x12 |4|
+|M3x16 or M3x20 SHCS|16|	
+|M5x20 |4|	
+|Ge5C Bearing|4|
+|M5x1mm spacer|4|
+|If using Halleffect 6x3 magnet | 1 |
+
+
+![1](Images/1.png) 
+
+First just insert GE5C bearing , it should just pop in
+
+![2](Images/2.png)
+
+
+![1](Images/3.png) 
+
+Now if you are using the "No Endstops" version you need 4 m3x16 screws per z joint, if you are using the endstop/halleffect version then you need 4 m3x20 per z joint.
+
+![1](Images/4.png) 
+
+![1](Images/5.png) 
+
+![1](Images/7.png)
+
+Use an M5x20 BHCS and 1 m5x1mm washer and screw it into the gantry using a roll in tnut
+
+
+![1](Images/6.png) 
+
+This is how it should be assembled when all done
+
+
+
+### NOTE: To address the question on whether to use the offset or non-offset pieces
+
+* if you are building a new printer using the ge5c mod, then i recommend the offset parts
+
+* if you are just installing these in a currently built printer then the stock non-offset parts are fine
+
+
+
+
+
+

printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/README.md

@@ -0,0 +1,53 @@
+# SexBolt Z endstop 
+![1](Images/9.png) 
+
+This an alternative way to do the Z endstop pin in a V2, instead of using a deflanged GT2 20T pulley, it uses 2  5x7x8 sleeve copper bearings/bushing 
+this is pretty simple to assemble. The reason behind this is to help keep the pin from falling out.
+
+
+
+##
+
+### BOM
+Screws			
+|Size|Qty|Link|
+|---|---|---|			
+|M4x8 SHCS|1|[Bolt Depot - M4x8 SHCS](https://www.boltdepot.com/Product-Details.aspx?product=6505)|
+|5mmx20mm Binding Screw|1|[Amazon - Binding Screw](https://www.amazon.com/dp/B07SNQXKKC)|
+|M2x8 Self Tapping|4|[Amazon - M2x8 SHCS Self Tapping](https://www.amazon.com/dp/B00YBMRAH4)|		
+|5x7x8 Sleeve Bearing|2|[Amazon - Sleeve Bearing](https://www.amazon.com/dp/B07JLVRYKT)|
+|Z endstop PCB | 1 | [Formosissima - Z endstop PCB](https://deepfriedhero.in/products/z-endstop-pcb-for-voron-v2-4)|
+
+
+Full kit can be purchased [here](https://deepfriedhero.in/products/voron-2-4-sexbolt-kit) 
+##
+
+![1](Images/1.png) 
+
+First just insert two of the sleeve bearings into the top, they should bottom out with about 2mm or so poking out the top
+
+![2](Images/2.png)
+
+
+![1](Images/3.png) 
+
+Next insert the female side of a 5mmx20mm chicago screw (sex bolt, binding barrel) and screw in the M4x6 or M4x8 SHCS with some loctite to make sure it doesn't move over time
+
+![1](Images/4.png) 
+
+![1](Images/5.png) 
+
+Next insert the Z endstop PCB and secure it with 4 m2x10 self tapping screws
+
+![1](Images/6.png) 
+
+![1](Images/7.png) 
+
+Next just secure it to your V2 like you would the stock Z endstop
+
+![1](Images/8.png) 
+
+
+
+### This mod was based on the work done by Voron Discord User L.e.o.p.a.r.d for the [Micron](https://github.com/hartk1213/Micron) 3d printer. 
+