4b4192dc82
remove Spider DIN mount in favor of the Trident version ( #627 )
...
* folks can now use the Trident mounts for the Spider board
* use stl permalink
2022-08-16 12:38:23 -04:00
c571aae76e
Added Image ( #642 )
...
* Update README.md
Added MakeALeft to table
* Clean Front Middle Grill for Switchwire
* Delete front_mid_grill_no_magnets.stl
* Switchwire Clean Front Middle Grill
* missed Trident not supported X
* Installation note added
* fixed last change
* Update README.md
* Create CleanGrill.jpg
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Delete SW Grill v2.step
* Add files via upload
* Delete SW_Grill_v2.step
* Add files via upload
2022-08-16 12:37:36 -04:00
1d4225f99d
Adding my Switchwire mods. Side spool holder parts and panel jig. ( #777 )
...
* Adding my Switchwire mods. Side spool holder parts and panel jig.
* Added forgotten README.md.
2022-08-02 20:50:02 -04:00
5377889497
Skirt-mounted power switch for 2.4 ( #760 )
...
* Skirt-mounted power switch for 2.4
* Fixed a typo
* Fixed headings in readme
2022-07-24 08:41:46 -04:00
0d566b8b12
nice handle for Voron 2.4 ( #764 )
...
* add Voron 2.4 handle mod
* fixed typo for check mark
* fixed typos
* add STEP export of 3D model
* renamed STL file to conform to Voron naming conventions for accent colors
* STL mesh repaired
Co-authored-by: Lutz Dittrich <lutz.dittrich@i-gos.de>
2022-07-24 08:35:12 -04:00
55921dc9ec
New mod C17-EXT and C17-EXT-CARTRIDGE ( #730 )
...
* Create Readme.md
* Update Readme.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Create Readme.md
* Create Readme.md
* Add files via upload
* Create Readme.md
* Add files via upload
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Create Readme.md
* Create Readme.md
* Add files via upload
* Delete Readme.md
* Create Readme.md
* Add files via upload
* Delete Readme.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update README.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Delete Readme.md
* Delete Readme.md
* Delete readme.md
* Delete Readme.md
* Delete Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
Strange I don't see the fifth column in my browser, I have corrected
* Update Readme.md
Done, remove tracking
* Update README.md
Last
* Add files via upload
STL flip
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Create readme.md
* Add files via upload
* Create Readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Delete LICENSE.html
* Delete LICENSE.html
* Delete readme.md
* Delete C17-EXT-CARTRIDGE.f3d
* Delete C17-EXT.f3d
* Delete Readme.md
2022-07-24 08:34:56 -04:00
b20b7b7a64
[filenames] Standardize file naming for some accent parts ( #752 )
...
* Add '_' after [a] if missing
ie. `sed -E 's/(\[a\])([a-zA-Z0-9])/\1_\2/g'`
* As these are accent parts, name them as such
2022-07-24 08:29:40 -04:00
59d0c6965c
Bigtreetech U2C Mounting Bracket ( #766 )
...
* U2C Mounting Commit
Commit of U2C Mouting Bracket
* Update README.md
* Delete U2C_Mounting.PNG
* Update README.md
* Update to include Instructions for V0
2022-07-20 11:24:42 -04:00
6f2e2f01e9
Tip tophat by chirpy ( #755 )
...
* TipTophat
* Update README.md
* TipTophat added STEP
* Update README.md
* Updated Body Quarters and STEP file
* Updated Body Quarters
* Repaired STL files
2022-07-20 11:22:36 -04:00
35f97709fc
Add Revo Nozzle Skirt ( #751 )
2022-07-20 11:22:02 -04:00
1136648f2a
VEFACH - Voron Exhaust Filter Activated Coal + Hepa ( #763 )
...
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* Add files via upload
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
2022-07-18 17:52:20 -04:00
c683a9b1bb
[V0.1_Movable_Pulley_Z] Update the upper parts ( #765 )
2022-07-18 17:50:44 -04:00
fe25261736
Clip on door frame 350mm ( #743 )
...
* Update README.md
* Rename .stls to prepare for addition of 350mm files.
* Add 350mm .stl files.
* Update readme.
* Add 250mm versions, fix 300mm angle.
* Update README.md
Remove reference to missing 250mm version.
* Add .step files.
* Fix print orientation.
2022-07-17 17:11:04 -04:00
de620ad469
Combo inlet fit update ( #745 )
...
* Added width to opening
* Updated CAD files
* Delete Trident_2.4_ComboInlet_v3.f3d
* Delete Trident_2.4_ComboInlet_v3.step
* Add files via upload
* Add files via upload
* Delete Trident_2.4_ComboInletSkirt_v6.f3d
* Delete Trident_2.4_ComboInletSkirt_v6.step
* Add files via upload
2022-07-17 16:39:58 -04:00
720e266170
Updated README.md file ( #744 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
* Update README.md
Added information about how to use the Rainbow Barf on Klipper using the main repo, and how to mix it with the nozzle RGBW LEDs.
* Update README.md
Added warning concerning JLCPCB not providing the WS2812B-2020 LEDs anymore.
* Update README.md
Added an entry on the 'Updates' section.
2022-07-17 16:22:40 -04:00
1283f5f49d
Add Monster8 heatsert mount ( #746 )
...
- Can print 2x on V0 bed with no issue
- Uses heatsets
- Fits Monster8 V1 and V2
2022-06-22 05:10:06 -04:00
56b234fdc3
Door update ( #739 )
...
* Simplify to a single fusion file.
Update all the DXF to new v2.4R2 dimensions (1mm smaller across both dimensions)
Update README with details
Add new screenshot to show how to save DXF files from Fusion
* fix table formatting
* fix CAD link
2022-06-05 11:58:43 -04:00
aac299cb7e
Lgx lite side can board mount ( #737 )
...
* LGX Lite Side Mount
* Readme tweaks
2022-06-05 11:54:11 -04:00
55263c68db
Add DIN rail bracket for OrangePi 3 LTS ( #729 )
...
* Add DIN rail mount for OrangePi 3 LTS
* Fix orientation of parts.
2022-06-05 11:38:04 -04:00
e238ec3c02
Trident Internal Filament Spool Holder ( #719 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
* Create Readme
* Create README
* Added new STLs
Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame
* Update README.md
* Create README.md
* Update README.md
* Update README.md
* Create README.md
* Initial Release STL Upload
* Create README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2022-05-26 07:40:49 -04:00
3796f238c1
Adding RevoVoron Support ( #735 )
...
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
* added REVO_VORON and removed slice announcement
Its been a year, I don't need to keep the slice announcement in there
2022-05-26 07:39:06 -04:00
3b151667a5
restarted pull request for flush and overlapping profile covers ( #733 )
2022-05-23 14:52:59 -04:00
921360d085
Added step files where missing, remove files that were added to TridentR1 and added a few more mods frequesntly requested. ( #732 )
2022-05-23 13:43:48 -04:00
d839c6f6af
MKS CANable DIN Mount ( #728 )
...
* canablepro
* Delete canable_pro_cad.JPG
* Create canable_pro_cad.jpg
2022-05-21 10:26:59 -04:00
f2caa290f1
Addition of my Mod PiTFT Mount ( #720 )
...
* Added PiTFT Mount
Added PiTFT Mount
* Update readme.md
* Create STL
* Add files via upload
* Delete STL
* Create readme.md
* Added STL files
* Delete [a]_display_mount_x2.stl
* Delete display_middle_skirt.stl
* Delete pitft70_housing_front.stl
* Delete pitft70_housing_rear.stl
* Create placeholder.md
* Added Some Pictures
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/Pictures directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Display_Far.jpg
* Delete Display_Close.jpg
* Add files via upload
* Update readme.md
* Added Pictures and updated Instructions
* Update readme.md
* Added Printing Instructions
* Add files via upload
* Update readme.md
* Update readme.md
* Added my Entry in the List
* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/SLT directory
* Add files via upload
2022-05-21 10:25:42 -04:00
44dacde39c
Create README.md ( #709 )
...
* Create README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete README.md
* Create README.md
* Add files via upload
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
Order correction
2022-05-21 10:25:22 -04:00
203c5a62b1
RockNRoll-Mod ( #615 )
...
* Create README.md
* Update README.md
Added M3x20 to BOM
* Update README.md
* Add files via upload
uploaded STLs
* add CAD data and folder structure
* Update README.md
* Update README.md
* Update README.md
* uploaded pictures
* Create support_03.jpg
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed STEP and STLs
* renamed STLs
* changed hole design of brace screw hole
Thanks barthini for the idea!
* added images
* Update README.md
* changed M3 screw length and renamed project
* added assembly instructions and pictures
* Update assembly_base_plates_01.jpg
* Update README.md
* removed image
* added mod to modlist
* Update README.md
* Update README.md
* added supports and compatibility to 2.4r2
added base plates with forks for the rockers compatible with the new r2 feet. Also added in-model-supports to support the holes over the overhang for the rear panel. As requested by user ✪Runanaツ#3906 I added a version for 6mm thick panels (including foam tape).
* Updated the README and pictures to encorporate the recent changes.
* Update README.md
* Add additional support to shorten bridging
also removed supports entirely in CAD data
* Delete Thumbs.db
removed Thumbs.db - thanks Windows
2022-05-21 10:25:04 -04:00
191eca4484
fix alphabetical ordering issue. ( #731 )
2022-05-19 11:37:30 -04:00
0229a0fa06
update readme.md ( #724 )
...
* add rear umbilical mod
* Update README.md
* Update README.md
* update folder structure
* Create Rear_Umbilical.step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
initial commit was wrong (1.8) mod is only confirmed by me to work with 2.4
Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
2022-05-19 11:00:14 -04:00
0db2e68db2
PCB/CAN Mount Adaptor ( #722 )
2022-05-19 10:59:29 -04:00
ef0aecfc7d
AngryCAM USB V2.0 Update ( #718 )
...
* AngryCAM USB V2 Update
* corrected Readme.md, due to missing content
* removed redundant image and updated ReadMe.md
* updated ReadMe.md with more details on V2 and re-added V1 pictures for history reasons
* remove typos from ReadMe.md and updated/added some images
* Final changes to ReadMe.md
* bugfix #1 : corrected length of used M3 SHCS screw in ReadMe.md to M3x20
* bugfix 1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20
2022-05-19 10:57:27 -04:00
38d475bbd8
V2.4r2 Z-Drive Motor Tensioner Mod base plates ( #707 )
...
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
* 2.4r2 version
Modded the original design for the new r2 feet and cutouts of the baseplate.
Only the baseplate has changed.
* Moved the whole mod to the "abandoned_mods" folder.
* Update README.md
* Update [a]_2.4_base_plate_b_mod_x2.stl
* added the change log section
* Fixed Link
* Fixed Link
2022-05-10 10:14:06 -04:00
f377353ae0
add rear umbilical + y endstop relocation mod ( #704 )
...
* add rear umbilical mod
* Update README.md
* Update README.md
* update folder structure
* Create Rear_Umbilical.step
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
2022-05-09 18:32:00 -04:00
8f1d3f9a35
Updated PCB, solve need for inline resistor for impedance matching ( #716 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* Removed non-necessary components
Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.
* Delete bom.csv
* Delete cpl.csv
* Delete RGBW_LED_circular_panel_for_Stealthburner.zip
* Updated production files
* Update README.md
2022-05-09 14:24:33 -04:00
d515bf02b0
Added bed holder for kirigami bed ( #713 )
2022-05-09 14:11:31 -04:00
1ac2fb06ed
Horseshoe spool holder ( #712 )
...
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
2022-05-09 14:06:45 -04:00
a109b9af81
Add part numbers for inlet parts. ( #710 )
2022-05-09 14:00:07 -04:00
339b14cd11
Abandoned mods ( #700 )
...
* fix order in readme.md
* move purge bucket mod to abandoned mods
* update readme.md for abandoned mods.
* Fix broken link to abandoned mod.
* fix broken link to mod *for real this time*
* Fix typo in readme
2022-05-07 09:15:38 -04:00
64260d6916
SB+CW1+PCB Cover Added ( #663 )
...
* SB+CW1+PCB Cover Added
Added a low-poly style cover for users that are still rocking the Clockwork1 and PCB with Stealthburner. This should be compatible with ERCF and Hartk style PCBs.
* Update README.md
* Update README.md
* Fixed empty STP
Fixed the STP file which was empty for some reason and hopefully corrected the merge issues with the main readme.md
* Fixed formatting on mods README.md
* Update README.md
2022-05-02 22:44:52 -04:00
0461850f78
4.3 Fly Screen Mount ( #705 )
...
* 4.3 Fly Screen Mount
* removed a couple of files and updated STL orientation
2022-04-26 13:14:20 -04:00
2f8760c06e
Pull-out_electrical_store for Voron 2.4 ( #690 )
...
* Add files via upload
* Delete printer_mods/ZZP8202/Pull-out_electrical_store directory
* Pull-out_electrical_store
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* update
* Delete Guide_rail_C-SR36Y18.stp
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* update 3d
* Create README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* update 3D
* update drawing
* upload photo
* upload photo
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* change name
* Create fan_balnk_X2.STL
* Delete fan_balnk_X2.STL
* Create Fan_decorative_panel_X2.STL
* Update README.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Update README.md
* Update README_CN.md
* Delete Voron_V2.4_Pull-out_electrical_store.SLDASM
* Create Voron_V2.4_Pull-out_electrical_store.STEP
* Update README_CN.md
* Update README_CN.md
* Update README_CN.md
* Update README.md
* Create STEEL_CORNER_LBSB6-2020_X8.pdf
* Delete STEEL CORNER_LBSB6-2020_X8.pdf
2022-04-26 13:13:58 -04:00
4142122e55
VEFACH - Voron Exhaust Filter Activated Coal + Hepa ( #706 )
...
* Update README.md
* Add files via upload
* Create Readme.md
* Create Readme.md
* Add files via upload
* Add files via upload
* Delete 0_filterdummy_dont_print.stl
* Delete 1_coal_for_infill_mesh.stl
* Delete 1_coal_with_mesh.stl
* Delete 1_hepa.stl
* Delete 1_lid.stl
* Rename stlcad.md to Readme.md
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* Update README.md
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
2022-04-26 13:13:19 -04:00
ad9dcb3ace
Combo inlet ( #708 )
...
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
2022-04-26 13:08:38 -04:00
c44511f856
Adding Z Locks ( #703 )
...
* adding z locks
* updated z lock readme
* updated main readme
* updated exports
2022-04-23 10:44:51 -04:00
16353a785d
3dpandme mods ( #676 )
...
* Add thermistor holder zero
* Add fannypack zero
* Update to level readme
* Add cad for fannypack
* Add dxf for fannypack zero
* orientate fannypack zero for printing
* fixed readme links
* Fixed missing section that I didn't push
* Added non affiliate links
* Fixed last affiliate link
* Update README.md
Co-authored-by: rr-david <david@rivelinrobotics.com>
2022-04-23 10:44:10 -04:00
e836a31b10
Clip on door frame ( #628 )
...
* Initial commit.
* Upload STLs, images, and update readme.
* Add photos to readme.
* Update README.md
* Update README.md
* Update README.md
* Delete extended_door_latch.stl
* Rename extended__door_latch
* Update README.md
* Correct typo.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
2022-04-23 10:23:23 -04:00
51274cec36
Door panels ( #686 )
...
* Creation (from prior attempt) of a laser-cut door panel for 2.4
* add stuff to master readme
* Update README.md
Change the links to relative links per request
2022-04-21 18:18:54 -04:00
72ddd62140
[V0.1_Movable_Pulley_Z] Redesign upper parts ( #697 )
2022-04-21 17:47:32 -04:00
0ed572f147
update to latest version ( #698 )
...
* update to latest version
* crop picture
2022-04-21 17:44:49 -04:00
78b16e37b4
WagoMounts mod ( #695 )
...
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Add files via upload
* Delete Wago_221-41x_Extrusion_&_Thin_Din_Mount.f3d
* Delete Wago_221-41x_Extrusion_&_Thin_Din_Mount.step
* Delete Wago_3x_221-41x_Angled_Din_Rail_Mount.f3d
* Delete Wago_3x_221-41x_Angled_Din_Rail_Mount.step
* Create README.md
2022-04-21 17:38:10 -04:00
d340bd97fd
fix order in readme.md ( #699 )
2022-04-20 13:51:55 -04:00
f64c79319b
Johanncc ( #678 )
...
* Added entry and files for the Raspberry Pi Camera Mount
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Adjusted naming convention of files to remove spaces
* Added the flex cable requirements
* Minor fix to README.md
* Minor fix to README.md
2022-04-18 16:42:13 -04:00
7ea4c4d483
Minor updates for Trident Inverted Electronics - added rear Z stepper mount for easier plate insertion. ( #692 )
...
* Add files via upload
* Add files via upload
* Delete printer_mods/LoganFraser/TridentInvertedElectronics directory
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update README.md
* Add files via upload
* Delete Trident_r2_Inverted_Electronics_v2.f3d
* Delete Trident_r2_Inverted_Electronics_v2.step
2022-04-17 06:55:24 -04:00
a243b64f87
Added new STLs for spool holder variations ( #679 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
* Create Readme
* Create README
* Added new STLs
Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame
* Update README.md
2022-04-16 19:37:11 -04:00
5359cf570d
PiPlate Skirt mod and raspberry pi mount --- Trident Inverted Electronics mod ( #688 )
...
* Add files via upload
* Add files via upload
* Delete printer_mods/LoganFraser/TridentInvertedElectronics directory
* Add files via upload
* Update README.md
* Update README.md
* Update readme.md
* Update README.md
2022-04-16 19:36:17 -04:00
d8f6b1ecc2
printer_mods/Mini_After-LGX-Lite ( #623 )
...
* Mini_After-LGX-Lite
Mini_After-LGX-Lite
* Update README
Update README
* Update README.md
Updated README.md
* Update README
Update README
* adj print orientation
adj print orientation
* Delete printer_mods\Mini_After-LGX-Lite folder
* Renamed folder, removed spaces
* Adj STL orientation
* repaired mesh, added revo versions
* Delete x-carriage.stl
* Update README.md
2022-04-14 09:56:16 -04:00
18c7940976
Added 2-hole version, added STEP files to comply with new requirements ( #681 )
2022-04-11 14:32:54 -04:00
282eadbe6b
A remake of ryandam's Mod for an easy centered cable management ( #651 )
...
* Create Center_cable_management_duct
A remake of ryandam's Mod for a centered cable management.
I reinforced the slots to make it more robust.
* Add files via upload
* Update README.txt
* Delete printer_mods/davidauvergne/Pictures directory
* Add files via upload
* Delete printer_mods/davidauvergne/Pictures directory
* Add files via upload
* Update README.txt
* Update README.txt
* Delete CableDuct_Body_50X208mm_hole.stl
* Delete CableDuct_Body_50X208mm_no_hole.stl
* Delete cover_duct_50x208.stl
* Add files via upload
* Add files via upload
* Delete Center_cable_management_duct
* Update README.txt
* Create Center_cable_management_duct
* Update README.md
* Update README.md
* Update README.txt
* Update README.md
* Update README.md
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-04-10 14:39:57 -04:00
3384caf830
6mm slot cover ( #576 )
...
* 6mm slot cover
Simple cover for extrusions with 6mm slot width to prevent intrusion of dust and leaked fused filamet
* update
* update
* Delete slot_cover.3mf
* Delete slot_cover_one_side.3mf
* Update README.md
* Update README.md
Moved at the bottom of the file as required
* Update README.md
Moved under the following line:
| | LGX Lite toolhead PCB mount | Mount for Hartk's toolhead PCB(s) for LGX Lite | ❌ | ✔️ | ✔️ | ✔️ | ✔️ |
2022-04-10 10:57:08 -04:00
2854c7afbe
V2.4-Trident-Spool-Holders ( #620 )
...
* Create elcrni
* Delete elcrni
* Create sdfsdfs
* Update and rename sdfsdfs to Voron spool holder mods
* V2.4 Trident Spool Holders
* Delete V2.4-Trident-Spool-Holders
* Delete Voron spool holder mods
* V2.4-Trident-Spool-Holders
* V2.4-Trident-Spool-Holders
* Updates
* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory
* Create 1
* Create 2
* V2.4-Trident-Spool-Holders
* File Updates
* Updates
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete BB__spool_arm_left.3mf
* Delete BB__spool_arm_right.3mf
* Delete BB__spool_core.3mf
* Add files via upload
* Delete BB__spool_arm_left.stl
* Delete BB__spool_arm_right.stl
* Fixed STL orientation
* Update README.md
* Update README.md
2022-04-08 17:59:20 -04:00
3d7aeb5b8c
Belt tension helper for V0.1 ( #609 )
...
* Create readme.md
* Create readme.md
* Update readme.md
* Create readme.md
* Add files via upload
* Create readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
* Delete belttool-btm_v2.3mf
delete per request from Voron team
* Delete belttool-top_v2.3mf
delete per request from Voron team
* updated orientation
2022-04-08 10:48:09 -04:00
efaecd26f8
Add my mods to user mods directory ( #611 )
...
* Create readme.md
* Add files via upload
* Delete printer_mods/Hobson318 directory
* Create readme.md
* Add files via upload
* Create readme.md
* Update readme.md
* Add files via upload
* https://github.com/Hobson318/VoronUsers/tree/master/printer_mods/Hobson318/Belt_Tension_Wrench
* Add files via upload
* Update README.md
* Add files via upload
* Delete Tool 2.jpg
* Rename belt wrench v4.step to belt_wrench_v4.step
* Rename STM32_Klipper_Expander No Holes v2.step to STM32_Klipper_Expander_No_Holes_v2.step
* Rename STM32_Klipper_Expander v5.step to STM32_Klipper_Expander_v5.step
* Delete readme.md
* Delete readme.md
2022-04-06 21:49:05 -04:00
d5b492175f
Fix skirt_a_350 for the Display mount 5inch ( #616 )
...
* Fix skirt_a_350
Fix mirroring for the skirt_a_350.
* Repair stl
Repair stl
2022-04-06 21:45:43 -04:00
8b445ae57e
Add PITFT50 45-degree mount ( #677 )
...
* Add PITFT50 45-degree mount
* typo
* Use relative links
2022-04-06 21:38:37 -04:00
f7ac2039c7
Voron 1.x/2.x hepa filter exhaust ( #625 )
...
* Inital Upload
1. Contrains rough draft of Readme.md. Will provide updates with Images soon.
2. Added images directory with some images of the build.
3. Added STL directory with all printed parts.
* added note about the nevermore micro.
updated readme with note about coupling this exhaust filter with the nevermore micro.
* Update README.md
minor update to improve wording.
* Update README.md
fixed heading formatting.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed project directory, updated mods README
updated printer_mods readme.
renamed HEPA filter directry to remove spaces.
* added image of filter
* Update README.md
Modified instructions to inlcude steps for mounting to the chamber.
* Changes requested by cbc02009
* removed ref from Amazon links.
* reordered dePrintinator in printer_mods README.md
* fixed non-manifold geometry issue in lid
Fixed, hopefully should pass the CI process now.
2022-04-06 08:11:16 -04:00
8f3bf42e71
Bracket for Octopus (PRO) Boards ( #568 )
...
* Create README.md
* created and uploaded all files
* updated readme.md's
* updated readme.md
* updated README.md
* update
* Updated printer_mods/README.md
* Updated printer_mods/README.md, corrected typos and namechanges in mod README.md
* stl repair
2022-04-06 08:10:47 -04:00
2e52c1c72c
Mathematical potato ( #622 )
...
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* V0 Belted Z Revisions
Updated bed mount to have better grip on belt teeth
* Update V0-ZBelt-KirigamiBed_body.stl
revised body
* Updated Repo
Removed problem CAD files
* Re-commit
attempt to fix problem stl
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
2022-04-05 13:18:42 -04:00
01d4189ab7
Fixed problem with mirrored logo on z_belt_cover_b. Now the logo has … …the correct orientation. ( #617 )
2022-04-04 19:05:11 -04:00
8bbca2d0d0
Add Trident Parts Design Logo and correct Typos in README files ( #646 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
* Initial comit
* Update README file
* Update README
* Update README
* Update README
* update main README
* update main README
* fix missing ')' on footnote 1
* Update README
* Inital Commit for Octopus V1.1 Color PIN Diagram
* Update README file
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Add footnote about MOTOR_PWR_IN Fuse if >24V used
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_Pro_V1.0_Color_PIN_Diagram directory
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_V1.1_Color_PIN_Diagram directory
* Shorten filename
* Update README
* update README
* Update README
* update README
* update README
* update README
* update README
* update README
* update README
* Update README
* update README
* update README
* Shoten Filenames
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update Voron 0.1 design
* Add Trident Parts Design Logo files; Update README
* Update README
* Update README files
* Update relative path
* Update relative paths in README files
* Update Trident README file
* Repaired .stl file
* removoe .vscode folder
* update
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2022-04-04 18:07:42 -04:00
f1f820e4b0
Trident bed fans ( #661 )
...
* Add trident bed fans
* Add CannedBass mods
* Add installation instructions
2022-04-04 08:54:07 -04:00
15a143256b
In-Line Filament Dust Scrubber ( #577 )
...
* Create README.md
* Create Scrubby
* Delete Scrubby
* Create README.md
* Delete README.md
* Add files via upload
* Update README.md
* Create test
* Add files via upload
* Delete test
* Update README.md
* Update README.md
* Update README.md
* Delete Scrubby.STL
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
2022-04-04 06:41:49 -04:00
3ea38c4b9f
Lgx lite toolhead pcb mount ( #610 )
...
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
* Uploading untested PCB cover
* Rearrage
* Fixed readme
* Changed image
* jpg not jpeg
* Typo in readme
* Delete STL
* PCB cover
* Change to readme
* Update readme
* Update readme
* Added download instructions and image to readme
* Update readme
* Update readme
* Remove cover folder
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-04-03 18:52:34 -04:00
d336b43a0b
C92X_PsycHoShafts_Mount ( #665 )
...
* Create PsychoShaft
* Delete PsychoShaft
* Create README.MD
* Add files via upload
* Update README.MD
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete C92X_Extrusion_Bracket.stl
* Add files via upload
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create CAD
* Delete CAD
* Create CAD
* Delete CAD
* Add files via upload
* Create CAD
* Delete CAD
* Create CAD FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Add files via upload
* Delete CAD FILES
* Delete C92X_Camera_Bracket.stl
* Delete C92X_Extrusion_Bracket - No Support Required.stl
* Delete C92X_Extrusion_Bracket - Requires Support.stl
* Delete C92X_Spacer_Arm.stl
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/STL. directory
* Create FILES
* Add files via upload
* Delete FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create FILES
* Add files via upload
* Delete FILES
* updated all stl's for PR
Updated CAD and STL finds, no longer requires support for all files.
2022-04-03 18:51:54 -04:00
253556d06f
add V0 No-Drop Nuts for door latches ( #671 )
2022-04-03 18:51:27 -04:00
33a8da178b
New mods: VSW_Double_60mm_Fan_Mount and AB_Turbo_Mod ( #668 )
...
* Added new mod 'VSW_Double_60mm_Fan_Mount'
* Added new mod 'AB_Turbo_Mod'
* AB_Turbo_Mod edits
Added photos
* AB_Turbo_Mod edits
Minor changes to improve print quality
* AB_Turbo_Mod edits
Minor edits to further improve print quality
* Added step file for each mod for GPLv3 compliance
2022-04-03 18:13:57 -04:00
034a3b3053
Adding MKS Mosfet Mount ( #664 )
...
* Adding MKS Mosfet Mount
* Add image, part number and link to Mosfet
* fix link to Mosfet
2022-04-01 09:33:51 -04:00
94925a6c34
Revo Voron Added ( #652 )
...
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
2022-03-31 19:06:03 -04:00
4960ffb761
Simplified klicky documentation ( #669 )
...
* Simplified klicky documentation
Moved all the setup to the klicky repository.
Updated the probe dock.
* removed duplicate dock
* photo links corrected
* corrected dock orientation
2022-03-31 12:58:42 -04:00
4058b94da0
Adding Kirigami bed led front ( #633 )
...
* Kirigami_LED_Bed_Front.stl
Kirigami bed front with space for LED (Neopixel or equivalent)
* Add files via upload
* Delete printer_mods/reQu1em00/Kirigami_LED_Bed_Front/STL directory
* Create README.md
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete STL
* Update README.md
* update of readme to amend spelling mistake
* Delete Kirigami_LED_Bed_Front.stl
* Delete Kirigami_LED_Bed_Front_defuser.stl
* Create STL
* Delete STL
* Add files via upload
updated stls. Rechecked and, repaired
2022-03-19 14:48:10 -04:00
2575e29aad
Adding the Rainbow Barf Logo LED for Stealthburner ( #634 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
2022-03-19 14:45:13 -04:00
5149e65364
CR Touch Probe "Snap Mount" for v2.4 (MGN9) ( #655 )
...
* Create README.md
* Added CR Touch Mount for v2.4 MGN9
* Update README.md
* Update README.md
* Update printer_mods README.md
2022-03-19 14:41:50 -04:00
c90527f57a
More robust belt paths for Voron Switchwire ( #657 )
...
* adding first version of the mod
* renaming the files to respect proper name
* fix formatting of readme
* add pics of install
* adding clarification in the readme
* readme formatting
* readme formatting
* better name and link to master readme
* table formatting fixes
Co-authored-by: Jan 'Yenda' Trmal <jtrmal@apptek.com>
2022-03-19 14:41:24 -04:00
e9b9e5948e
Add ab plug for gantry ( #600 )
...
* add ab plug for gantry
* Fix README spacing
* Update README
* Update README to remove 2.4 clip. Change to direct commit
* remove incorect README
* Update Main README
2022-03-16 18:37:34 -04:00
49f1df8abb
Klicky for v0 ( #580 )
...
* new file structure and v0 release
* Update README.md
* updated printer path
* V2 readme update
* Update Klicky_v0_family.jpg
* Update README.md
* pictures cleaning up
* corrected STL errors
* Create klicky_base.jpg
* corrected v0 stepper_y reference
* updated integrated cowling
* uploaded Dragonfly BMO cowlimg
With integrated klicky mount
* corrected Dragonfly cowling
* small flaw corrected on Sherpa mini cowling
2022-03-16 18:35:53 -04:00
1c9fadcad8
Update V0-Adafruit Pixel Sticks README ( #641 )
2022-03-16 15:12:21 -04:00
2e8c80aa92
Updated for 2.4r2 ( #645 )
...
* Create README.md
* Delete printer_mods/bythorsthunder directory
* Create README.md
* Add files via upload
* Added Image
* Create stls
* Add files via upload
* Delete stls
* Create cad
* Add files via upload
* Delete cad
* Create image
* Add files via upload
* Update README.md
* Delete Front_Idler_MGN9_Backer.JPG
* Delete image
* Delete printer_mods/bythorsthunder/MGN9_Backers/CAD directory
* Create cad
* Add files via upload
* Delete cad
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Add files via upload
* Update README.md
Updated to reflect changes to Voron 2.4 with R2 release.
* Update README.md
Added BOM
* Update README.md
* Update README.md
* Add files via upload
Add stls for 2.4r2
* Create test
Added Folder for 2.4r1
* Delete test
* Create 2.4r1
Added 2.4r1 Folder
* Add files via upload
Moved Old files to new folder
* Delete 2.4r1
* Delete [a]_left_upper_belt_clip_MGN9_backer.stl
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete [a]_xy_chain_bridge_modified.stl
* Delete left_idler_upper_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Update README.md
* Add files via upload
Add CAD
* Delete Belt_Clamp.f3d
* Delete Front_Idler_A_Top_Modified.f3d
* Delete Front_Idler_B_Top_Modified.f3d
* Add files via upload
Updated Photos
* Add files via upload
* Update README.md
* Add files via upload
* Delete Front_Idler_MGN9_Backer.JPG
* Delete Rail_with_idler.jpg
* Delete Rails_installed.JPG
* Update README.md
2022-03-16 15:09:55 -04:00
5147698542
Ellis/Bed_Fans: Update readme, fix bug where M190 S0 would cause Klipper to wait indefinitely ( #649 )
...
* fix potential lock up with M190 override
It's common to have a slicer configured to send "M190 S0" before PRINT_START (to discourage the slicer from inserting it's own M190.) Klipper's handling of "M190 S0" is to ignore the command instead of waiting for the bed to cool to a temperature it likely will never reach. This change fixes the bedfans.cfg version of M190 to also ignore a S0 parameter (and doesn't freeze the entire printer waiting for the bed to cool to 0 degrees.)
* update
* update
* update
* update
Co-authored-by: garyd9 <garyd9@gmail.com>
2022-03-16 15:07:26 -04:00
194bd78df4
Update design with detent as suggested by devincody ( #650 )
2022-03-16 15:06:01 -04:00
6f41ddac2b
Belts Holder for v0 ( #542 )
2022-03-16 15:02:27 -04:00
035f700b57
keeping LGX current with MGN12/Trident info and mod (plus some extras) ( #596 )
...
* add MGN12/Trident information and mod, also a few helpful extras
* update links
* add SB notes
2022-03-16 14:50:27 -04:00
e0a76a50e8
Add LRS PSU screw terminal cover ( #604 )
...
* Add LRS PSU screw terminal cover
* Fix typo in README
* Update main README
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-03-16 14:49:32 -04:00
ae7937dc0e
Hartk mod update for 24r2 ( #638 )
...
* 24r2 mod updates
updated pin mod for 24r2, moved old files but moved to "old" folder
renamed and removed confusing GE5C files
added trident pin mod
* Update README.md
* renamed files
* added images
* Update README.md
* Update readme.md
* fixed printing orientation
* Update README.md
2022-02-23 18:45:28 -05:00
362d4f21f0
Add 4 channel relay under deck mount ( #599 )
...
* add 4 channel relay
* Update README
* Create mods index readme at root samwiseg0 folder
* Update Main README
* Remove Pi bootscreens
* Do not remove trailing space
2022-02-17 16:55:54 -05:00
7f66b8cbcc
Updated README file to explain issue with the Circuit Design Space Software. ( #629 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
* Initial comit
* Update README file
* Update README
* Update README
* Update README
* update main README
* update main README
* fix missing ')' on footnote 1
* Update README
* Inital Commit for Octopus V1.1 Color PIN Diagram
* Update README file
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Add footnote about MOTOR_PWR_IN Fuse if >24V used
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_Pro_V1.0_Color_PIN_Diagram directory
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_V1.1_Color_PIN_Diagram directory
* Shorten filename
* Update README
* update README
* Update README
* update README
* update README
* update README
* update README
* update README
* update README
* Update README
* update README
* update README
* Shoten Filenames
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update Voron 0.1 design
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2022-02-16 09:20:40 -05:00
7a217221ac
Add esp8266 nodemcu din mount ( #602 )
...
* Add esp8266 nodemcu din mount
* Update din clip link
* Update esp8266 mount to be universal
* Fix Din clip link
* Remove 2.4 din clip
* Update main readme
* Add link to what an esp8266/nodemcu is
* Update README to include WLED information
2022-02-13 12:36:04 -05:00
f9b123b81f
Adafruit adxl board changed size ( #613 )
...
* Address issues found by PineappleTuesday
* Fix IGUS mount for GY-291 and change file names for clarity
* Change Adafruit to reflect new CAD
https://learn.adafruit.com/adxl345-digital-accelerometer/downloads
2022-02-13 12:17:48 -05:00
5b152020c2
fix: Rapido mount for ABBN for stock AB ( #619 )
2022-02-13 07:06:18 -05:00
b86d7ead31
Add V2.4 corner cable hide ( #601 )
...
* Add corner_cable_hide
* Update main README
* Update files to be able to print right side up
2022-02-05 06:09:24 -05:00
0b1066d0d2
Mantis Dual 5015 - Usermods, More Hotend support(Mosquito, Rapido, Crazy Volcano), Redo Documentation, plus more. ( #594 )
...
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Add files via upload
* Delete carriage_assembly_hotend_mount.jpg
* Add files via upload
* Add files via upload
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left_cut_fan_ears.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right_cut_fan_ears.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v1.037.stl
* Add files via upload
* Update firmware_slicer_settings.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Delete Readme_v1.07.pdf
* Delete README.md
* Delete Macros_and_Config.txt
* Delete printer_mods/Long/Mantis_Dual_5015/images directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete printer_mods/Long/Mantis_Dual_5015/tmp directory
* Delete duct_rapido_v0.02_left.stl
* Delete duct_rapido_v0.02_right.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.01.stl
* Add files via upload
there was a slight interference between duct and hotend mount in 0.01. fixed this
* Update readme.md
* Add files via upload
* Delete Hotend_Mount_Dragon_v1.037.stl
* Delete duct_v1.037_Left.stl
* Delete duct_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Add files via upload
* Delete Hotend Mount_Rapido_v.02.stl
* Add files via upload
* Delete duct_rapido_HF_v0.02_left.stl
* Delete duct_rapido_HF_v0.02_right.stl
* Add files via upload
* Add files via upload
* Delete Magprobe Longs Rapido UHF v0.4.stl
* Delete Magprobe_v0.31_Crazy_Volcano.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.03.stl
* Add files via upload
* Add files via upload
* Update readme.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
Upper mount rotated 120 degrees. This varies depending on how your rapido was assembled.
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right.stl
* Add files via upload
* Delete duct_rapido_HF_v0.03_left.stl
* Delete duct_rapido_HF_v0.03_right.stl
* Add files via upload
* Delete duct_dragon_v1.037_Left.stl
* Delete duct_dragon_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.02_left.stl
* Delete duct_rapido_UHF_v0.02_right.stl
* Add files via upload
* Delete printer_mods/Long/Mantis_Dual_5015/CAD directory
* Add files via upload
updated CADs to include newer versions of ducts which have tighter fit to the hotend mount
* Delete Mantis_MGN12_CrazyVolcano_v0.03.step
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.03_left.stl
* Delete duct_rapido_UHF_v0.03_right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Delete duct_brace_v1.0.stl
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Delete printer_mods/Long/Mantis_Dual_5015/Usermods directory
* Update bom_acknowledgements.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Update readme.md
* Update readme.md
2022-02-02 18:53:59 -05:00
c4a0ac1ac9
Add extrusion thermistor mount ( #603 )
...
* Add extrusion thermistor mount
* Update main README
2022-02-02 18:40:19 -05:00
Geoffrey Young
makealeft
Steve Peterson
ScramblerUSA
1-0-R
Obomaker3D
whi-tw
electroleon
Jonathan Michaelson
Maple Leaf Makers
Kevin Aka Sam
Nathan
scanlory
LoganFraser
VinnyCordeiro
Chris Lee
Jot Powers
Oli Wright
Amey
elcrni
AaronHerrick
chri-kai-in
reapola
Mac10goesBRRRT
Backenfutter
RockNLol
cbc02009
#2559
Stephan Kohls
KiloQubit
Wile.e
jaysuk
zzp8202
tallman5
dmason1992
JoAnn Manges
johannchung
jooole
120decibell
3dconceptauvergne
filotto78
msagit
Hobson318
Tircown
Nic Eggert
dePrintinator
DaStivi
MathematicalPotato
Akio
LJ
Autocrit
Paul
Sascha Ohms
Maximilian Förg
Mike Thomas
jlas1
reQu1em00
jjgraphix
Jan "yenda" Trmal
samwiseg0
bythorsthunder
AndrewEllis93
Richard Mitchell
TheSquiffy
hart
Bart Lammers
mandryd