bf8c9a28ec
PR nova printhead - beaugalbraith ( #462 )
...
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
2021-10-05 21:29:40 -04:00
3baa900762
Removing mods ( #476 )
...
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* Updated based on PR comments
* Updated STL so it doesnt hit the bed
* Utility Belt
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Removing mods
* Removed links
2021-10-05 13:28:59 -04:00
a0a7dcc466
V2.4 Exhaust Housing for 120mm Fan and 4in Duct ( #475 )
...
* First commit so I can see the README
* Finished instructions and added STL files
* Update README.md
* Update README.md
* Update README.md
Images were stretch funny on mobile, remove the height=<> argument to try to fix that
* Fix overhang greater than 45 degrees
* Found a few more overhangs that needed fixing
2021-10-03 21:01:52 -04:00
3961a1da2c
Richardjm/adxl chain ( #460 )
...
* Work in progress (so no index link) for ADXL mount
* Fix readme
* Fix readme some more
* Untested prints
Clearance for electronics cover
Board closer to motor giving more wire clearance
Cleaned up CAD
Suggested JST XH
* Update CAD and fix readme
* Reorientation and re-exporting
* Should stop fiddling - added extra support bracket for chain
* Integrating with main CAD noticed there wasn't space for cover
* Update CAD image with latest design
* Add hardware to cad
* Add clearance image and design process
* Adafruit variant - untested
* Add adafruit mentions
* Add to readme for PR
* Finish of ADXL readme
* Remove WIP from ADXL readme
* Fix orientation which largely seems to be a matter of chance in Fusion 360
* PR Changes
Reduced overhang, by also removing attempt to use M3 threaded inserts for a 2.5mm through hole in the Adafruit board
* Fix readme some more
2021-10-03 08:20:20 -04:00
6cdf7a55a7
2x Mods for V2 Sept2021 ( #456 )
...
* Create Readme Plugpanel 3x Keystone
* create .gitkeep
* uploading pics
* Rename printer_mods/khay/micro_backplate/V2_3x_Keystone_Plugpanel/README.md to printer_mods/khay/V2_3x_Keystone_Plugpanel/README.md
* Rename printer_mods/khay/micro_backplate/V2_3x_Keystone_Plugpanel/Img/.gitkeep to printer_mods/khay/V2_3x_Keystone_Plugpanel/Img/.gitkeep
* Delete DSC_3253.JPG
* Delete Plug_Panel_CAD.png
* uploading pics
* Adding STL 3x Keystone for V2
* Creating Readme for 4020 Electronics Fan Mod
* Adding STL 4020 Electronics Fan Skirt
* Create .gitkeep
* Adding Pics for V2-200 4020 Electronics Fan Mod
* adding V2 Mods from Khay
* added Trident checkmarks
* Reupload STL - Correction of Filename
* Delete Plug Panel.stl
* Updating link to relative
2021-10-02 19:17:42 -04:00
c4e1df511e
Switchwire feed slot with pass-through ( #455 )
...
* Switchwire feed slot with passthrough
* Updated feed slot
* Fixed stl location, added cad
* Updated README, updated fillet to chamfer, renamed new files without spaces
2021-10-02 16:29:03 -04:00
349f04c6c0
Remove GalileoADXL, incompatible with newer Galileo ( #472 )
...
* Delete printer_mods/leandromarceddu/GalileoADXL directory
Does not work anymore
* Update README.md
Removed GalileoADXL
2021-10-02 13:55:05 -04:00
4854bd9ac1
Add LRS-100 DIN bracket ( #471 )
2021-10-02 11:12:26 -04:00
7c4bc3a04f
Orbiter clockwork adaptor mod ( #441 )
...
* Created Orbiter-Clockwork Folder
* Added mod description for the Orbiter clockwork.
* Updated Requested Changes
Updated Links and Compatibility check.
* Update README.md
* Updated BOM
* Updated spelling error.
* Updated Step file.
* Updated File name and STL
2021-09-30 20:38:30 -04:00
0b64858059
Richardjm/led mounts ( #448 )
...
* LED mounting with integrated cable runs that go behind the Z-idlers.
* Need to change case of images directory
* Change case of Images directory
* Fix markdown
* Fix alphabetical ordering
2021-09-26 08:13:23 -04:00
06b6cb528b
Cricut .SVG Files for Voron Design Logos ( #444 )
...
* Initial Commit
* Update README file
* Update
* Add Voron 0.1 Logo
* Add Voron 2.4 Logos
* Added Voron Design Plain Logo
* Added Logo for Voron SwitchWire
* Added My Own Logo
* Update Printer_mods README.md
* Update README.md
* Update
* Added Voron 2.4 1_Color_without_Logo_Outline
* Added Designs without the LOGO outline
* Update README files
* Update README
* Update README.md file
* Update README files
* Update README file
* Update README files
* Update README files
2021-09-25 08:55:41 -04:00
5a21a99492
LGX Mount for V0.1 ( #407 )
...
* Create README.md
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete LGX_A_Drive_Frame_Lower_x1.stl
* Delete LGX_A_Drive_Frame_Upper_x1.stl
* Delete LGX_B_Drive_Frame_Lower_x1.stl
* Delete LGX_B_Drive_Frame_Upper_x1.stl
* Delete LGX_Cowling_V0.1.stl
* Delete LGX_X_Endstop_Bumper.stl
* Delete LGX_X_carriage_back_plate.stl
* Delete LGX_X_carriage_top.stl
* Delete LGX_Y_Endstop_Bumper.stl
* Delete LGX_Z&Y_Endstop_Mount_x1.stl
* Delete LGX_strain_relive.stl
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Rename printer_mods/MikesMods/7x7 Drag chain Ends/README.md to printer_mods/MikesMods/7x7_Drag_chain_Ends/README.md
Spaces removed from dir name
* Delete printer_mods/MikesMods/7x7_Drag_chain_Ends directory
* Delete printer_mods/MikesMods/LGX mount for V0.1 with 2nd X rail directory
* Delete printer_mods/MikesMods/7x7 Drag chain Ends directory
* Add files via upload
* Update README.md
* Delete README.md
* Update README.md
* Update README.md
* Update README.md
* Delete LGX_strain_relive.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete LGX_Z&Y_Endstop_Mount_x1.stl
* Added Y endstop mount
* Update README.md
* Add files via upload
* Update README.md
* Delete LGX_Y_Endstop_Mount_x1.stl
* print orientation fixed
* mod added to printer_mods README.md in alphabetical order
* Fix README listing.
* errors are fixed
* Fix STL errors.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-23 17:49:11 -04:00
eb88b1e834
adxl345_skirt_keystone mod ( #440 )
...
* Create README.md
ADXL345 skirt keystone with 2 and 4pin microfit 3.0 connectors. I used what I had laying around.
It's based on alchemyEngine's iteration of the g-code buttons. You can also see how to use it there.
https://github.com/alchemyEngine/EnragedRabbitProject/tree/main/usermods/Skirt-Microfit-Inserts
* Add files via upload
* Create adxl345_skirt_keystone
* Fix skirt keystone
* Update README.md
* Update skirt.keystone.adxl345.jpg
* Update README.md
* Split parts
Update stl's
* Update README.md
Fixed typo's
2021-09-22 19:37:24 -04:00
798b94c6c8
Newer, better Wago mount ( #431 )
...
* Initial Mod upload
* Updated main readme
* Revert "Updated main readme"
This reverts commit 46bc0c2cea
2021-09-21 20:25:16 -04:00
11a81f91a5
Voron Switchwire_Y_Belt_Tensioner ( #437 )
...
* Create Switchwire Y Belt Tensioner
This mod for Switchwires Y axis Belt tension without cut pannels
Fasteners
2x M3x8mm SHCS2x M5x10mm SHCS1x M5x10mm BHCS1x M5x16 up to 20mm for tensioner2x M5 T-Nut (For 3030)1x M5 T-Nut (For 2020)2x M3 Threaded Insert
Use M5 Allen key for tension your beltYou can use brim while printing "Body" part
Have a good prints (:
Photos might be differences from STL s because of differences with tested parts, latest tested parts are uploaded and ready for your download
* Delete Switchwire Y Belt Tensioner
* Switchwire Y Belt Tensioner
* Update Readme
* Create SECURITY.md
* Update Readme
* Update and rename Readme to Readme.md
* Delete SECURITY.md
* Update Readme.md
* Add files via upload
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* Update Readme.md
* SW_Tensioner_body_V1.STL Upgraded
* Delete SW_Tensioner_Body.stl
* Delete SW_Tensioner_body_V1.stl
* Add files via upload
* Delete SW_Tensioner_Bearing Block.stl
* Add files via upload
* Delete SW Y Belt Tensioner.stp
* Add files via upload
* Update Readme.md
* Update Readme.md
* Rename printer_mods/Mckurt/Switchwire Y Belt Tensioner/Readme.md to printer_mods/Mckurt/Switchwire_Y_Belt_TensionerReadme.md
* Add files via upload
* Delete Switchwire_Y_Belt_TensionerReadme.md
* Delete Readme.md
* Create Readme.md
* Delete SW_Tensioner_Bearing_Block.stl
* Add files via upload
* Rename printer_mods/Mckurt/Switchwire Y Belt Tensioner/Readme.md to printer_mods/Mckurt/Switchwire_Y_Belt_TensionerReadme.md
* Create Readme.md
* Delete Switchwire_Y_Belt_TensionerReadme.md
* Delete Readme.md
* Create Readme.md
* Delete mod.png
* Delete asembly.png
* Delete 7.jpg
* Delete 6.jpg
* Delete 1.jpg
* Delete 5.jpg
* Delete 4.jpg
* Delete 3.jpg
* Delete 2.jpg
* Delete SW_Tensioner_Bearing_Block.stl
* Delete SW_Tensioner_Body.stl
* Delete SW_Tensioner_Cap.stl
* Delete SW_Y_Belt_Tensioner.stp
* Add files via upload
* Delete asembly (1).png
* Delete mod (1).png
* Add files via upload
* Update Readme.md
* Add files via upload
* Delete SW_Tensioner_Bearing_Block.stl
* Add files via upload
* Add files via upload
* Add files via upload
* fix markdown list
* Update README.md
* Use spaces in visible link name.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-21 09:11:11 -04:00
e2628c7d96
Schurter inlet for Trident + README fixes.
2021-09-16 14:02:31 +02:00
01c870e74e
Richardjm/picam corner ( #424 )
...
* Working picam mount with the best field of vision
* A little documentation
* Probably won't work on VSW, but maybe Trident
* Reduce image size and make jpg
* Fix typo
* Make link relative
2021-09-14 10:00:25 -04:00
035bba7d57
Huvud Chain Mount ( #425 )
...
* Added Huvud chain mount
* Updated STL to included built-in support
* Edited pictures for clarity
* Updated README
2021-09-13 19:08:29 -04:00
a935163062
Add LED Light Clip to VoronUsers ( #443 )
...
* Add CAD Files
* Update README.md
* Create Readme.md
* Update Readme.md
* Update Naming
2021-09-13 07:49:48 -04:00
a3a9e0494c
V0.1 Block Style Handle ( #384 )
...
* Create Derpimus
* Delete Derpimus
* Create Derpimus
* Delete Derpimus
* Create README.md
* Add files via upload
* Update README.md
* Create README.md
* Update README.md
* Delete block handlev0.1.stl
* Add files via upload
* Add files via upload
* Update README.md
* Update README.md
* Delete 20210711_204143.jpg
* Delete 20210711_203746.jpg
* Update README.md
* Delete block handlev0.1.stl
* Add files via upload
* Create images
* Delete images
* Add files via upload
* Update README.md
* Delete block_handlev0.1.stl
* Add files via upload
2021-09-12 20:51:22 -04:00
fe00af8e83
Tophat Hinge for V0 ( #391 )
...
* Create readme.md
TophatHinge for V0
* Add files via upload
* STL files updated to the correct orientation
* Updated readme
* Updated Readme
* Delete Lower_Corner_adapter_2_and_4_Clip_x2.stl
* No overhang and multiple thicknesses
* Delete Hinge_panel_left.stl
* Delete Hinge_panel_right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete Hinge_panel_left_2.5mm.stl
* Delete Hinge_panel_left_2mm.stl
* Delete Hinge_panel_left_3mm.stl
* Delete Hinge_panel_right_2.5mm.stl
* Delete Hinge_panel_right_2mm.stl
* Delete Hinge_panel_right_3mm.stl
* Overhang corrected + Multi-thickness
* STEPfiles
2021-09-12 19:36:40 -04:00
c066d9e3c8
Filament Runout Sensor ( #428 )
...
* Create README.md
* Create README.md
* Add files via upload
* Delete README.md
* Create readme.md
* Add files via upload
* Delete readme.md
* Add left and right handed housings
* Create readme.md
* Add files via upload
* Delete readme.md
* Add files via upload
* Update README.md
* Create filament_runout.cfg
* Delete Switch_Cross_Section .png
* Fix file name
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-09-12 11:50:24 -04:00
05d3f6a36e
Add midspan clips to Magnetic_Panels mod ( #427 )
...
* Add Midspan Clips
* Delete Magnetic Panel Midspan Clips v1.f3d
* Change CAD file name
* Create readme.md
* Add files via upload
* Delete readme.md
* Add midspan STLs
* Update README.md
* Update README.md
* Update STL
* Delete Mid_Cap.stl
* Delete Mid_Mount.stl
* Update CAD
2021-09-12 11:04:43 -04:00
ff562ac11c
Parametric Spool Holder ( #422 )
...
* Parametric Spool Holder
* Fix review comments
2021-09-07 20:24:47 -04:00
e0ab0b4fa2
Bed fans, single MGN9H carriage, 15x15 drag chain end updates ( #416 )
...
* Bed fans initial commit
* Fix readme formatting
* Fix formatting
* fix formatting
* fix formatting
* fix stl orientation
* initial commit for single mgn9 carriage
* modify readme
* reorganize
* reorganize
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* max_power warning
* update readme
* update readme
* update readme
* rename MGN9 to MGN9H
* reorganize
* rename
* fix image
* remove cycle_time
* increase M3 tolerance
* add photo
* add image
* add to mod table
* add photo
* add photo
* Bed fans initial commit
* Fix readme formatting
* Fix formatting
* fix formatting
* fix formatting
* fix stl orientation
* initial commit for single mgn9 carriage
* modify readme
* reorganize
* reorganize
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* update readme
* max_power warning
* update readme
* update readme
* update readme
* rename MGN9 to MGN9H
* reorganize
* rename
* fix image
* remove cycle_time
* increase M3 tolerance
* add photo
* add image
* add to mod table
* add photo
* add photo
* fix bug causing bed fans to not turn off with bed
* set thresholds to integer values
* Support TURN_OFF_HEATERS
* Modify comments
* Modify fast speed
* Update readme
* Update README.md
* Update readme
* update readme
* update readme
* update readme
* update readme
* update readme / photos
* add photo
* formatting
* Update short Z joints CAD to remove the rest of v2.4 assembly
* Reorder readme
* update readme
2021-09-04 18:16:27 -04:00
59c3ede646
Voron V0 LCD Touchscreen Skirt ( #323 )
...
An extended 40mm skirt + touchscreen for the Voron V0.
Adds a 3.2" Adafruit PiTFT Plus resistive touchscreen, mounted to the
front skirt area. Faces up at a ~30 degree angle.
Optional laser-cut bottom electronics panel. This panel could also be 3D
printed on larger printers with a ~230mm x ~230 mm bed area.
2021-09-04 16:31:17 -04:00
418481ea07
V0.1 Movable Pulley Z Drive Mod ( #413 )
...
* Initial commit
* Update README.md
* Adjust the depth of M3 screw holes for bed_mount
* Add explanation about the 80T gear stl
* Adjust the markdown format
* Remove overhangs
* Add a hidden M5 washer to BOM
* Fix typo
2021-08-31 20:02:53 -04:00
2804e6f86c
Magnetic Panels ( #405 )
...
* Create README.md
* Create README.md
* Add files via upload
* Delete README.md
* Create README.md
* Delete README.md
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Delete Cap Assembly.png
* Add files via upload
* Update README.md
* Update README.md
* Delete Magnetic_Cap_6mm.stl
* Add files via upload
* Update README.md
* Rename printer_mods/bobbleheed/V2.4_Magnetic_Panels/README.md to printer_mods/bobbleheed/Magnetic_Panels/README.md
* Update README.md
* Create README.md
* Add files via upload
* Update README.md
* Delete README.md
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Delete printer_mods/bobbleheed/V2.4_Magnetic_Panels directory
* Create README.md
* Add files via upload
* Delete README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete Magnetic Panel Corner Clips.f3d
* Delete Magnetic_Panel_Corner Clips_6mm.f3d
* Create readme.md
* Add files via upload
* Delete readme.md
* Delete Magnetic_Cap_6mm.stl
* Add files via upload
* Correct STL orientation
* Correct Orientation of Cap
* Correct File Orientation
2021-08-29 19:33:23 -04:00
e2bd7188ba
added SW Fan Mount Mode ( #400 )
...
* added SW Fan Mount Mode
* fixed readme
2021-08-29 16:58:43 -04:00
60b3801976
BMO afterburner toolheads ( #398 )
2021-08-29 14:06:21 -04:00
4593c23472
Added side entry exhaust housing ( #412 )
...
* Added side entry exhaust housing
* Fix filename
2021-08-23 11:37:53 -04:00
620a669340
Vertical PSU Mount ( #375 )
...
* Vertical PSU Mount
* updated readme
2021-08-22 20:11:21 -04:00
bc32449724
LoudOwl aka Stabby a dual 5015 mod directly swappable on Afterburner ( #395 )
...
* Create README.md
* Update README.md
* Delete printer_mods/Baltojikale directory
* Create README.md
* Add files via upload
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
* Add files via upload
removed spaces in names
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/CAD directory
bad naming
* Add files via upload
corrected naming
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory
incorrect naming
* Add files via upload
corrected naming
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
wrong orientation
* Add files via upload
fixed stl orientation
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Add files via upload
* Update README.md
text change houses>>> house
* Rename printer_mods/Baltojikale/LoudOwl aka Stabby/README.md to printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md
* Rename printer_mods/Baltojikale/LoudOwl_aka_Stabby/README.md to printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md
* Rename printer_mods/Baltojikale/LoudOwl aka StabbyREADME.md to printer_mods/Baltojikale/LoudOwl aka Stabby/README.md
* Fixed name
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/STL directory
* Delete printer_mods/Baltojikale/LoudOwl aka Stabby/Visual directory
* Reuploading to LoudOwl_aka_Stabby
* Create Visual
* Delete Visual
* Add files via upload
* Add files via upload
* Add files via upload
* Delete printer_mods/Baltojikale/LoudOwl_aka_Stabby/STL/Old_need_supports directory
* Add files via upload
* Update README.md
* Delete Front_piece_supports.stl
* Delete Logo_piece_w_support.stl
* Add files via upload
* Delete Front_piece_w_supports.stl
* Add files via upload
* Delete Logo_piece_w_support.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
fixing English in readme
* Delete Back.stl
* Add files via upload
* Add files via upload
small improvements for printability
* Delete LoudOwl_V14.f3d
* Delete LoudOwl_V14.step
* Delete LoudOwl v15.f3d
* Delete LoudOwl v15.step
* Add files via upload
updated geometries
* Delete Back.stl
* Add files via upload
updated geometry
* Delete comparison.jpg
* Add files via upload
2021-08-22 16:34:10 -04:00
2dfacf062f
Bed Wiring Grommet for Voron 2.4 ( #397 )
...
* Create readme.md
* Add files via upload
* Update README.md
* Update README.md
* Create Readme.md
* Add files via upload
* Update Readme.md
* Update README.md
* Update Readme.md
Updated, printed and tested parts, updated readme to reflect the fact it has been printed and tested.
* Add files via upload
* Update Readme.md
* Create readme.md
* Add files via upload
* Update README.md
* Add files via upload
* Update readme.md
* Create readme.md
* Add files via upload
* Delete pic1.JPG
* Delete pic2.JPG
* Delete pic3.JPG
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Create readme.md
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Update readme.md
* Add files via upload
* Create readme.md
* Create readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
* Delete readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update README.md
* Delete Microswitch_PCB_Pod.step
* Delete Microswitch_PCB_Pod.stl
2021-08-13 08:48:01 -04:00
41734ec93e
add 4.3 inch display mount for switchwire ( #392 )
...
* add 4.3 inch display mount for switchwire
* update readme
Co-authored-by: Gi7mo! <github@gi7mo.org>
2021-08-08 09:49:25 -04:00
4487d37362
Magnetic grill mount ( #393 )
...
* Initial commit
* Removed spaces in filenames
2021-08-07 10:51:11 -04:00
de87b598bf
Voron 2.4 USB Camera Mount ( #389 )
...
* Create ReadMe.md
* Add files via upload
* Update ReadMe.md
* Update ReadMe.md
* Update README.md
* Update README.md
* Create ReadMe.md
* Rename printer_mods/Takuya/ReadMe.md to printer_mods/Takuya/USBCameraMount/ReadMe.md
* Delete VoronCamMount.zip
* Add files via upload
* Delete printer_mods/Takuya/CameraMount directory
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update ReadMe.md
* Update ReadMe.md
* Create ReadMe.md
* Update ReadMe.md
* Update ReadMe.md
* Add files via upload
* Delete VoronCamMount.zip
* Update ReadMe.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update ReadMe.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-08-04 20:59:33 -04:00
8f40b51112
Extrusion backers to counteract bimetallic frame bowing ( #390 )
...
* transferred from other repo
* fixed link
* added panzerchain compatible hole spacing
2021-08-04 19:57:45 -04:00
5f9287ce1c
Adafruit NeoPixel mounts for V0 ( #388 )
...
* Initial commit
* Address comments in PR #388
2021-08-04 08:21:40 -04:00
1e1bdf058e
Mantis Dual 5015 by Long ( #387 )
...
* Delete Duct_v1.033.2_Left.stl
* Delete Duct_v1.033.2_Right.stl
* Delete Mount_Dragon_v1.036.stl
* Delete Readme_v1.02.pdf
* Add files via upload
* Add files via upload
* Update Macros_and_Config.txt
* Delete Readme_v1.04.pdf
* Add files via upload
* Delete Mantis Dual 5015 v1.037 v10.step
* Add files via upload
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
* Add files via upload
* Update Macros_and_Config.txt
* Update README.md
* Update README.md
* Add files via upload
* Delete readme.md
* Delete Carriage_v1.036.stl
* Delete Chain_Anchor_v3.1.stl
* Delete Magprobe_Dock_Arm_v1.0.stl
* Delete Magprobe_Dock_Mount_v1.0.stl
* Delete Magprobe_Gantry_Dock_Arm_v0.21.stl
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Dock_Mount_by_JosAr_v1.stl
* Delete Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
* Delete Magprobe_Longs_v0.31.stl
* Delete Mantis_Dual_5015_v1.037.step
* Delete Readme_v1.04.pdf
* Delete Duct_v1.037_Left.stl
* Delete Duct_v1.037_Right.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete Magprobe_Gantry_Dock_Arm_v1.5_Single_magnet_Longer.stl
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update Macros_and_Config.txt
* Update README.md
* Delete Magprobe_Gantry_Dock_Mount_SinglePiece_by_JosAr_v1.stl
* Update README.md
* Update README.md
* Add files via upload
2021-08-03 19:39:03 -04:00
e1aba7145d
ADXL345 Chain Anchor mod ( #386 )
...
* add ADXL345 Chain Anchor mod
* Spelling
* fix insert amount
* remove spaces from filenames
fix some markdown warnings
* didnt actually test it on 1.8 and SW
* Adding the change requests from @KiloQubit
* Rotated stl to a printable orientation
* Readme file formatted
* typo in Markdown file
Co-authored-by: Padok <padok@disroot.org>
Co-authored-by: louis.frank <lfrank@dpz.eu>
2021-07-28 14:45:13 -04:00
723129277d
V1 3z mod ( #371 )
...
* Initial import
* Added instructions, dxf and config files
* Update README.md
* Update Bottom_Panel_Cutout_Cover_2_Color.stl
* Added photos and updated docs
* Update README.md
* Added slots for motor mounts to allow for more adjustment
* File cleanup
* Added note about stepper position
* Update README.md
* Update README.md
* Changed motor mount holes to use bridge cutter
2021-07-27 07:54:24 -04:00
cb8036fd67
BTT Octopus DIN vertical mount ( #385 )
...
* feat: BTT octopus DIN virtical mount
* fix: rename folder
* fix: remove space
* fix: spelling
* fix: stl oriantation, broken link, docs.
* fix: read me doc
* fix: read me
2021-07-20 19:40:20 -04:00
751291c769
added my e3 to sw mod ( #362 )
...
* Create readme
* added my mods
idk if im doing this right
* Create ender 3 to sw conversion
* Delete ender 3 to sw conversion
* gave mod name
* renamed folder
* Update README.md
* Update README.md
typo
* Update README.md
* Update README.md
* Update README.md
* converted f3d to step
* Update README.md
* Update README.md
* Update README.md
* stls updated
* renamed stls
* Update README.md
* updated names
* updated names
* Update README.md
* updated stuff to fulfil kiloqubit's request
* rename to have no spaces
* updated names
* Update README.md
* Update front_display.stl
* name update
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
2021-07-18 16:12:18 -04:00
256ff119a7
V0.1 LED Tophat Mod ( #378 )
...
* Create Shteeeeeve
* V0.1 LED Tophat Mod
* Update README.md
* Moving to Folder / Readme Updates
* Updates
* Updates
* V0.1 LED Tophat
* V0.1 LED Tophat
* V0.1 LED Tophat
* Update README.md
* V0.1 LED Tophat
* Update README.md
2021-07-17 13:07:34 -04:00
ff290f56f2
V0.1 skirt mod for SSD1306 OLED ( #380 )
...
* Add V0.1 skirt OLED mod
* Add V0.1 OLED skirt mod to mod list
* User nicer photo
* Remove redundant licensing statement
2021-07-12 19:38:39 -04:00
a425971f29
"Other" V2 Idlers Mod ( #369 )
...
* Create README.md
* Update README.md
* Add files via upload
* Create README.md
* Delete README.md
* Delete Other_Idler_V2.step
* Delete Other_Idler_V2.f3d
* Delete Front_Idler_Bottomx2.stl
* Delete Front_Idler_Topx2.stl
* Delete [a]_Idler_Carrierx2.stl
* Add files via upload
* Add files via upload
* Update README.md
* Delete printer_mods/Phalanx directory
* Create Other-V2-Idlers
* Delete printer_mods/Phalanx directory
* Create README.md
* Update README.md
* Update README.md
* Initial File Upload
* Added Other Idlers to readme.md - alphabetical
* Fixed Link
* Added Images File
* Update README.md
* Update README.md
* Update README.md
* Update README.md
Changed BOM to list format
* Update README.md
Added note for fully-threaded screw
* Update README.md
* Add files via upload
* Delete 20210619_102801.jpg
* Delete 20210619_203112.jpg
* Delete 20210619_204308.jpg
* Delete 20210624_092643.jpg
* Delete 20210709_210049.jpg
* Update README.md
* Update README.md
Updated image links
* Delete Heat_Set_Note.jpg
* Delete Idler comparison.jpg
* Add files via upload
Updated image files
* Update README.md
updated file type in links
* Update README.md
Corrected Case on Images folder
* Update README.md
Added standards and settings
* Add files via upload
Added standards and settings snips
* Update README.md
* Update README.md
2021-07-12 15:55:55 -04:00
67ccf3287b
Voron_V0.1_Parts_Logo ( #383 )
...
* Create README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
2021-07-11 15:48:52 -04:00
259cc6c5ee
add Dual Rail Installation Guide ( #379 )
2021-07-11 13:16:16 -04:00
732a9e28c7
Added Articulating Raspberry Pi 7" Display Mount ( #376 )
...
* Added Articulating Raspberry Pi 7" Display Mount
* Fixed line endings in README.md
* Fixed typo in README.md
* One more time
* Cleaned up Tinker CAD model artifacts in Fusion 360
2021-07-06 08:05:32 -04:00
beaugalbraith
Thiago Locatelli
hergtoler
Richard Mitchell
khay8485
Jason Ragsdale
Leandro Marceddu
Bart Lammers
spacelab2021
JoAnn Manges
MikesMods
newphreak
boingomw
Mustafa Cosku KURT
KiloQubit
120decibell
eddie
Derpimus
Marijn Siemons
bobbleheed
henrikssn
AndrewEllis93
John Gehrig
Nathan
csch0
christophmuellerorg
Eric Kelly
Baltojikale
lococnc
Gi7mo
Oli Wright
ObstacleTAKUYA
Jon Sanders
QuackProfit
mandryd
Padok
Yeriwyn
Robert
UltraWaffles
Shteeeeeve
Matthias Liffers
selliott79
conqueror433
Geoffrey Young
Ray Ramirez