* Initial commit, base files
* Add readme
* Adjust directory structure, add images
* Improve read-me with more instructions/future plans
* Add todo for m3 drill template to readme
* Readme update
* Fix issue with extrusion size change causing overlap in mirroring. Group history into named sections. Fix orientation of model.
* Added more descriptions to parameters
* Reduce heatset count
* Add STEP file
* Update readme
* Update to use smaller magnets. Added drill guide prints. Updated design and STL files. Update readme with more details/instructions.
* Add source link for t nuts
* Add source for foam
* Add total estimated cost
* Add STL for 250 and 350 sizes
* Add top level readme entry
* Remove text specific to 300 size
* Remove m3 heatset offset that is no longer required
* Remove spaces
* Bug fix. Rail slot m3 hole fillet should have been chamfers. Export all the things again.
Co-authored-by: altmank <mailspamhere@gmail.com>
* I added a small extractor for a 4010 fan and 30mm filter material to the V0,
so I can be printed ABS at home. In addition, the new panel has 2 small holes to hide the cables of the
2 LED lamps behind the printer.
The lamps carry two 24V LED strips with 60 LEDs / meter (6 LEDs / 10cm) with a width of 1cm.
The panel is simply exchanged for the "Plug & Play" plexiglass panel.
A threaded insert with an M3x8 or M3x10 screw is used to fasten the cover. A
fter the LED strips have been glued in, the LED lamps are screwed together with 2 screws and 2 M3 threaded inserts each.
* Adjusted some dimensions. Name translated into English. CAD data added
* Final
* Maße geändert, neue Fotos hinzugefügt
* Readme.md updated
* STL/Skirt 12mm switch.stl update
* Update README.md
* Update README.md
* README.md update
* Remove spaces from files/directories.
* Fix AliExpress link.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Tircown's repository and mods.
Add Tircown's repository.
Add 3 mods in:
- Tiltable mount for a 5" display in skirts
- Plug panels with raspberry in vertically
- DIN bracket for the Meanwell RS-15-5 PSU
* Fix validation errors for existing mods
Fix facets reversed for:
display5inch_front_rear_skirt_a_350.stl
display5inch_front_rear_skirt_a_300.stl
display5inch_arm_b.stl
* Readme changes
Display_mount_5inch: add instructions to remove built-in support
Raspberry_plug_panel: add instructions with description of hardware
* Fix thin wall
Fix thin wall in display5inch_case.stl and display5inch_case_moretolerance.stl
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* added files for Y endstop relocation
* Update README.md
* Update README.md
* removed extra file and fixed orientation
* changed folder name, added new files
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* removed duplicate file
* added MGN12 Version of the Pinned XY joints to work with Arks MGN12 mod
* added MGN12 Pinned XY joints, removed umbilical stuff as thats not ready to be merged yet, moved the endstop relocation files all together in thier own folder, updated all the readmes for both mods
added MGN12 Pinned XY joints, moved the endstop relocation files all together in thier own folder and linked each mod to eachother , updated all the readmes for both mods
* Update README.md
* Update README.md
* update readmes, fixed file orientation
* Power Skirt mod for Schaffner FN284-10-06
Added Power Skirt mod for Schaffner FN284-10-06
* Requested Changes from KiloQubit
made changes recommended by KiloQubit and added more information about the Schaffner FN284-10-06
* Add mods
* Update README.md
* Improve mount
* add image
* Update README.md
* fix orientation
* add step f3d
* add support and update readme
* add support and update readme
* improve overhang and change img link
* fix orientation and images, also update design
* add in use iamge
* update LED readme and adjust filament sensor to reduce overhang
* Voron SW 9mm Belt Mod
This mod converts the current belt design from 6mm to 9mm belts.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* 9mm Y Belt Mod for SW
This is a simple mod for the SW. It converts the existing 6mm beltpath of the Y axis to 9mm Belts.
* Update README.md
* Update README.md
* Update README.md
* added picture
* Update README.md
* Update README.md
* removed the spaces between the filenames
* describtion changes
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* changed orientation
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update Koios's mods to be current
Add new glass rest. These all work on 2.4, tested on my printer.
* Fix readme/glassrest
Correct the glass rest to use fillet & readme
* Fix legacy printers warning
* Initial commit V0 C920 Mount
* Update README.md
* Repair Corner cable clip STL
* Updated compatibility note
* Fit voronusers repo rules, plus some grammar
* Update Koios's mods to be current
Add new glass rest. These all work on 2.4, tested on my printer.
* Fix readme/glassrest
Correct the glass rest to use fillet & readme
* Fix legacy printers warning
* Create Voron Part Logo
I have created Voron Parts Logo to be added to Your printer Panels
* Voron Parts Logo for laser cutting Vinyl
Created this Parts logo using Voron V2.4 parts for cutting Logo out of Vinyl Sticker for back panel
* Delete Voron Parts Logo.dxf
* Delete Voron Parts Logo.jpg
* Delete Voron Parts Logo.png
* Delete Voron Parts Logo.stl
* Delete Voron Parts Logo.stp
* Create README.md
* Delete Voron Part Logo
* Add files via upload
* Update README.md
* Add files via upload
* Update README.md
* Delete Image 1.jpg
* Delete Image 2.jpg
* Delete Image 3.jpg
* Delete Image 4.jpg
* Delete Image 5.jpg
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Delete Voron_Parts_Logo.stl
* Add files via upload
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Update nozzle_scrub.cfg
Fix error in script defining random selection of bucket halves for purging. Small speed unit correction. (thanks Deutherius#3295 on VD discord for pointing these out)
* Fix incorrect syntax
* Fix incorrect range definition
Range was incorrectly defined, leading to bucket_pos not actually being randomly selected.
* Add several features
- Scrubbing location and direction now follow the randomized location of left and right bucket.
- Added filament retract after a purge.
- Added a dwell/wait parameter after a purge for particularly oozy filaments.
Oakman
elpopo
John Gehrig
altmank
See1807
Tircown
Benjamin Spiekermann
tz
lococnc
Kyle
Clayton O'Neill
teookie
lakai
Nam Nguyen
empusas
Dr. Stefan Schimanski
0lympu5
sloscotty
chris gonzales
buzzdalf
Adrian Keet
Al
consibonsi
Justin Hunt
doubletrouble023
Justin Hunt
GiulianoM
Arek
piet206
omelethc
conqueror433
edwardyeeks
Keith
John Jardine
Kruppes
DaGrooch13
Joshua Longenecker
Leandro Marceddu
Marcus Forsell Stahre
JNP