Power Skirt mod for Schaffner FN284-10-06 (#280)

* Power Skirt mod for Schaffner FN284-10-06

Added Power Skirt mod for Schaffner FN284-10-06

* Requested Changes from KiloQubit

made changes recommended by KiloQubit and added more information about the Schaffner FN284-10-06

printer_mods/Empusas/PowerSkirt_FN284-10-06/README.md

@@ -0,0 +1,20 @@
+# Voron 2.x Skirt Mod for Schaffner FN284-10-06
+
+### Overview
+Voron 2.x skirt mod for the Schaffner FN284-10-06 power entry module with fuse and EMI filter.
+The Schaffner FN284-10-06 power entry module requires 2 fuses (Ø5 x 20mm) and is rated up to 10 A.
+There are 3 Faston 6.3 x 0.8mm connectors for spade female connectors or soldering and a 2 pole rocker switch.
+
+
+![Skirt Mod for Schaffner FN284-10-06](Screen_Shot_FN284_1.png)
+
+### Description
+This is an mod for the Voron 2.x skirt
+* You can use two M3x6mm countersunk screws with nuts to mount it on the skirt
+* There are two holes for keystone sockets for LAN and USB on the sides
+
+I liked the mod from DC67(../../DC67/plug_panel_schaffner), but could not find the Schaffner FN286-10-06 for a reasonable price. So I designed one for the Schaffner FN284-10-06.
+
+
+![Skirt Mod for Schaffner FN284-10-06 Render #1](Screen_Shot_FN284_2.png)
+![Skirt Mod for Schaffner FN284-10-06 Render #2](Screen_Shot_FN284_3.png)

printer_mods/README.md

@@ -33,7 +33,7 @@ like so:
 ||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:|
 |albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:|
-|al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:| 
+|al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:|
 | |[Analog Timer Mount](./al3ph/analog_timer_mount)|A skirt mount for analog timer |:heavy_check_mark:|:x:|:x:|:x:|
 | |[Filament Runout Sensor](./al3ph/filament_runout)|A simple filament runout sensor |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[PL05 Sensor Mount](./al3ph/pl05_mount)|A mount PL05 inductive sensor |:heavy_check_mark:|:x:|:x:|:x:|
@@ -72,6 +72,7 @@ like so:
 | Ellis |[15x15 Drag Chain Ends](./Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end pieces | :grey_question: | :grey_question: |:heavy_check_mark: |:x:|
 | |[Badge Retractor Mount](./Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the way. | :grey_question: | :grey_question: |:heavy_check_mark: |:x:|
 | |[Short Z Joints](./Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 |:x: |:x: |:heavy_check_mark: |:x:|
+| Empusas | [Power Skirt 2.x FN284-10-06](./Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | :x: | :x: | :heavy_check_mark: | :x:|
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |:x:|
 | GiulianoM | [Fly F407ZG Mount](./GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | :x: | :x: | :heavy_check_mark: | :x: |
 | Gizzle | [Ender 3 and Ender 3 Pro Switchwire Mod](./Gizzle/ender-3_(pro)_switchwire)| Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. | :x: | :x: | :x: | :heavy_check_mark: |
@@ -182,4 +183,5 @@ like so:
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 
+
 ---