Collection of my mods for Voron Printers. (#235)

* Add mods

* Update README.md

* Improve mount

* add image

* Update README.md

* fix orientation

* add step f3d

* add support and update readme

* add support and update readme

* improve overhang and change img link

* fix orientation and images, also update design

* add in use iamge

* update LED readme and adjust filament sensor to reduce overhang

printer_mods/README.md

@@ -33,6 +33,10 @@ like so:
 ||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:|
 ||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:|
 |albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:|
+|al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:| 
+| |[Analog Timer Mount](./al3ph/analog_timer_mount)|A skirt mount for analog timer |:heavy_check_mark:|:x:|:x:|:x:|
+| |[Filament Runout Sensor](./al3ph/filament_runout)|A simple filament runout sensor |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
+| |[PL05 Sensor Mount](./al3ph/pl05_mount)|A mount PL05 inductive sensor |:heavy_check_mark:|:x:|:x:|:x:|
 |arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
 | |[Magnetic hotend fan cover](./arkeet/magnet-fan-cover)|A replacement hotend fan cover, held with magnets instead of screws. |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
 | |[MGN12 X-axis](./arkeet/mgn12/)|Replaces the dual MGN9H rails with a single MGN12H. |:x:|:x:|:heavy_check_mark:|:x:|

printer_mods/al3ph/analog_timer_mount/README.md

@@ -0,0 +1,5 @@
+Skirt mount for V0, to allow mounting of analog timer.
+
+Mounts in back/right position.
+
+Fits https://www.aliexpress.com/item/799301917.html, or similar.

printer_mods/al3ph/filament_runout/README.md

@@ -0,0 +1,30 @@
+# FilamentDet
+Voron themed filament detection.
+
+I fancied making my own simple filament detection module, using spares from my Voron V0 build, and here it is..
+
+BOM
+
+4x M3 Nut
+
+4x M3x6 bolt (SH/BH)
+
+2x M2x10 Self Tapping Screws
+
+1x Omron Mouse Button - Micro Switch
+
+Bowden tube can be inserted to guide the filament in to the module, you might need to fettle this, as it maybe a bit tight and restrict the filament movement.
+There should be very little friction if all goes well. 
+
+The module works in either direction, it should be mounted away from the extrusion motor, as klipper buffers commands, so the further from the motor the better.
+
+
+I printed with 0.4mm nozzle 0.2mm layer height, no supports need.
+
+Print one of each STL.
+
+
+![Front](images/front.jpeg)
+![back](images/back.jpeg)
+![Internal](images/inside.jpeg)
+![In Use](images/in_use.jpeg)

printer_mods/al3ph/led_mount/README.md

@@ -0,0 +1,6 @@
+Led holder for WS2812 type LED strings, includes channel for data line to loop back for second strip.
+
+Includes additional print support (between led strip retainers), which needs to be removed before use.
+Mounts on top of the top extrusion, using 2 M3 bolts per strip, two strips required per side, (so they can be printed on V0).
+It does not interfere with the top hat. 
+

printer_mods/al3ph/pl05_mount/README.md

@@ -0,0 +1,11 @@
+Mount for PL05N2 Sensor.
+
+Designed for this model, but others may fit. https://www.aliexpress.com/item/32805983692.html
+
+Print 1 of each STL.
+
+Requires 8 x 6mmx3mm Round Neodymium Magnets.
+
+This is designed for temporary installation to level bed and build bedmesh.
+
+![Probe](probe.jpg)