Ender 3 Switchwire Conversion Taller Z Mod (#273)

* Create README.md

* Create README.md

* Add files via upload

* Create README.md

* Add files via upload

* Delete README.md

* Delete README.md

* Create README.md

* Add files via upload

* Delete README.md

* Update README.md

* Delete tall z front.PNG

* Delete tall z rear.PNG

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Delete bowden guide shorter v7.f3d

* Delete left front.f3d

* Delete left rear.f3d

* Delete right front.f3d

* Delete right rear.f3d

* Create README.md

* Add files via upload

* Delete README.md

* Update README.md

printer_mods/README.md

@@ -51,6 +51,7 @@ like so:
 ||[Ziptie Mount](./BlueBear/Ziptie_Mount)|Clippable Ziptie hooks for 1515 extrusions| :heavy_check_mark: | :x: | :x: |
 | btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount/README.md) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:|
 | buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:|
+||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: |
 | Conqueror433 | [Voron Parts Logo](./conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | :x: | :x: | :heavy_check_mark: | :x: |
 |consibonsi | [Y-Mod SW 9mm](./consibonsi/Y-Mod_SW_9mm)| 9mm Y belt mod for SW | :x: |:x: |:x: |:heavy_check_mark:|
 | d3nny | [Filtered Power Plug with RND_165-00057](./d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | :x: | :x: | :heavy_check_mark: |:x:|
@@ -177,4 +178,4 @@ like so:
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 
----
+---

printer_mods/buzzdalf/ender_switchwire_taller_z/README.md

@@ -0,0 +1,12 @@
+I loved the Ender 3 to Switchwire conversions that Gizzle and Triano did, but I didn't like the idea of losing z-height, so I created this mod.
+These parts are to extend the usable z-height of the printer back up around 250mm (I get 247mm with it on my own printer).  I re-used the upper Z parts Gizzle designed, and am including those here as well so you have everything you need in this repository.
+
+I also designed a bowden guide that will let you route your bowden tube between the belts and the upper cross member of the printer as seen in the picture below.  This works really well with a bowden setup, like the dual M4 extruders I use.
+
+You will need a base conversion for your Ender 3 in addition to these files.  You can find [Gizzle's Ender 3 conversion](../../Gizzle/ender-3_(pro)_switchwire) in the VoronUsers github page.
+
+![image1](IMAGES/picture.jpg)
+
+![image2](IMAGES/tall_z_front.PNG)
+
+![image3](IMAGES/tall_z_rear.PNG)