* Added entry and files for the Raspberry Pi Camera Mount
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Minor fix to README.md
* Adjusted naming convention of files to remove spaces
* Added the flex cable requirements
* Minor fix to README.md
* Minor fix to README.md
This config also works for MKS Robin Nano V3.1.
- V0.1 example config
- MKS Eagle/Robin Nano V3.1 board pin aliases
- new README with `make menuconfig` screenshot
* 6mm slot cover
Simple cover for extrusions with 6mm slot width to prevent intrusion of dust and leaked fused filamet
* update
* update
* Delete slot_cover.3mf
* Delete slot_cover_one_side.3mf
* Update README.md
* Update README.md
Moved at the bottom of the file as required
* Update README.md
Moved under the following line:
| | LGX Lite toolhead PCB mount | Mount for Hartk's toolhead PCB(s) for LGX Lite | ❌ | ✔️ | ✔️ | ✔️ | ✔️ |
* Inital Upload
1. Contrains rough draft of Readme.md. Will provide updates with Images soon.
2. Added images directory with some images of the build.
3. Added STL directory with all printed parts.
* added note about the nevermore micro.
updated readme with note about coupling this exhaust filter with the nevermore micro.
* Update README.md
minor update to improve wording.
* Update README.md
fixed heading formatting.
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* renamed project directory, updated mods README
updated printer_mods readme.
renamed HEPA filter directry to remove spaces.
* added image of filter
* Update README.md
Modified instructions to inlcude steps for mounting to the chamber.
* Changes requested by cbc02009
* removed ref from Amazon links.
* reordered dePrintinator in printer_mods README.md
* fixed non-manifold geometry issue in lid
Fixed, hopefully should pass the CI process now.
* Added V0.1 Belted Z mod, V0.1 2.5mm Tophat panel mounting parts, V0.1 3mm Tophat panel mounting parts
* Updated parts for proper print orientation
V0-ZBelt-FrontBottom-Bracket.stl
V0-ZBelt-Pancake-Stepper-Bracket.stl
V0-ZBelt-Top-Idler-Front.stl
* Removed requested files, updated README
* Updated README
* Update README.md
* Create V0.1_belted_z_drive.step
* Fixed broken STL
* Added Kirigami Bed parts
These parts replace the bed mount and belt clamps to make the V0.1 Belted Z drive compatible with Christoph Müller's Kirigami Bed design.
* Kirigami Bed Mounts
Updated branch using upstream master
Removed spaces from directory name
* updated readme
Updated readme and images with mid panel cutout dimensions.
* Updated Kirigami Bed Parts
Added CAD assembly for Kirigami bed and mounts
Updated Kirigami bed mounts STLs for belted Z
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* V0 Belted Z Revisions
Updated bed mount to have better grip on belt teeth
* Update V0-ZBelt-KirigamiBed_body.stl
revised body
* Updated Repo
Removed problem CAD files
* Re-commit
attempt to fix problem stl
* V0.1 Belted Z - Kirigami Mount Revisions
Better grip on Z belt
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
* Uploading untested PCB cover
* Rearrage
* Fixed readme
* Changed image
* jpg not jpeg
* Typo in readme
* Delete STL
* PCB cover
* Change to readme
* Update readme
* Update readme
* Added download instructions and image to readme
* Update readme
* Update readme
* Remove cover folder
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
* Added new mod 'VSW_Double_60mm_Fan_Mount'
* Added new mod 'AB_Turbo_Mod'
* AB_Turbo_Mod edits
Added photos
* AB_Turbo_Mod edits
Minor changes to improve print quality
* AB_Turbo_Mod edits
Minor edits to further improve print quality
* Added step file for each mod for GPLv3 compliance
* Simplified klicky documentation
Moved all the setup to the klicky repository.
Updated the probe dock.
* removed duplicate dock
* photo links corrected
* corrected dock orientation
* Add sample printer.cfg for Fysetc Spider 2.2 for Voron Trident
* Fix comments to say Fysetc Spider instead of BTT Octopus
* Remove 'Common Temperature Sensors' section as it contained some outdated information
* Swap Left and Right Z Steppers to match Trident Manual
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
* adding first version of the mod
* renaming the files to respect proper name
* fix formatting of readme
* add pics of install
* adding clarification in the readme
* readme formatting
* readme formatting
* better name and link to master readme
* table formatting fixes
Co-authored-by: Jan 'Yenda' Trmal <jtrmal@apptek.com>
* fix potential lock up with M190 override
It's common to have a slicer configured to send "M190 S0" before PRINT_START (to discourage the slicer from inserting it's own M190.) Klipper's handling of "M190 S0" is to ignore the command instead of waiting for the bed to cool to a temperature it likely will never reach. This change fixes the bedfans.cfg version of M190 to also ignore a S0 parameter (and doesn't freeze the entire printer waiting for the bed to cool to 0 degrees.)
* update
* update
* update
* update
Co-authored-by: garyd9 <garyd9@gmail.com>
Nathan
JoAnn Manges
LoganFraser
cbc02009
johannchung
elcrni
Chris Lee
jooole
120decibell
3dconceptauvergne
filotto78
msagit
Hobson318
Tircown
Nic Eggert
dePrintinator
DaStivi
MathematicalPotato
Akio
LJ
Autocrit
Paul
Sascha Ohms
Maximilian Förg
Tim Abraham
Mike Thomas
AaronHerrick
jlas1
Rich Edelman
reQu1em00
VinnyCordeiro
jjgraphix
Jan "yenda" Trmal
samwiseg0
Stephen Hurd
bythorsthunder
AndrewEllis93
Richard Mitchell
TheSquiffy