* Added a Klipper configuration and wiring diagram for the V1.8 using a FYSETC Spider 1.1 board
* Added the wiring diagram image to the readme for Spider 1.1 config on V1
* Duet 3 RRF3.1.1 example config
Work in progress example config.
* Update homez.g
* Correct homeall.g uploaded
* M566 typo corrected
* Delete old config - get ready for new
* Duet 3 6HC + 3HC example config
Still work in progrss - hasn't been cleaned yet
* Create readme.md
* Update readme.md
* Fixed macro call in homez.g
* Fixed macro call in homeall.g
* Fixing comments (with a proper github client this time).
* Fixed current on Z axis
thanks oc_geek :)
* Limit to Z axis
thanks oc_geek
* Corrected microswitch Y offset.
* Mesh macros correction
Home Z should not be needed after mesh
* Update move_over_microswitch.g
Co-authored-by: TheDorje <45540765+TheDorje@users.noreply.github.com>
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Added Articulating Raspberry Pi 7" Display Mount
* Fixed line endings in README.md
* Fixed typo in README.md
* One more time
* Cleaned up Tinker CAD model artifacts in Fusion 360
* Added BTT Octopus pin aliases config
* Added newline to the end of the config.
Please use this for reference only when converting from Duet2 RRF2 to RRF3 firmware.
(based on the Voron 2.1 firmware with all the macros and then further butchered by me.)
Minor things to note:
-Printer is 300^3
-0.9deg steppers on A/B drive and extruder.
-PT100 sensor.
Marc Pot
Matt Housh
DorjeDorf
Ray Ramirez
Joshua Longenecker
Florian Heilmann
P3D LLC
Norbs12
Benoit Miller
chron-kh
bryansj
danowar