* initial pull request for Angry CAM USB module
* corrected readme.md file
* updated readme.md file and removed obsolete images
* added missing images for cable path description
* remove obsolete images
* removed spaces from all file names and added more pictures to the readme.md
* reduced number of pictures and corrected typos in ReadMe.md
* Create README.md
A modified version of the z_carriage_stop that allows pass through of the wires such as the Neopixel light bars.
This is a direct replacement for the stock z_carriage_stop part.
* Update README.md
* Added modified z carriage stop
* Adding images
* Modified Z Carriage Stop for wire pass through
* Correct file names
Remove spaces in files names
* Klicky Probe Update
Updated Klicky Probe to the latest version
* removed some filename spaces
* some more filename corrections
* Added pressfit helper parts
* added Trident as supported
* some corrections
white space in the file names corrected
file corrections to allow easier printing
* removed duplicates & more spaces
* typos and errors corrections
* link error corrected
* uppercase corrections
* Initial commit of ABBN for 4020
* corrected format error
* Update Readme.md
adding an extra line after the headings so they hopefully appear as headings.
* updating readme for 5015 and 4020 abbn
these are also compatible with trident and VSW
* fixing issues with stl name, readme, and adding in Rapido support
In addition to fixing the naming issues, and readme issues, I am adding in support for Phaetus Rapido.
* Update README.md
adding Rapido to description in readme
* fixing rapido stls
These are required but not mentioned in the BOM. The mount mentioned says 8mm M3 screws are required but I found those to be too short, so I mentioned 10-12mm. Happy to change it if preferred.
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
* Added printhead_rear_v1.1
The new printhead_rear keeps the hotend rigid
* Updated readme
Nova is coming out with v1.2 so I updated readme to specify v1.1
* add lgx
* add new information
* adjustments
* tyop
* add LGX to top level...
* spider bracket works with trident
* add LGX models
* add LGX model
* tyop
* fix tyop
* add toc, call out Nemgra's work a bit more
* change to proper gear_ratio (thanks to @KiloQubit!)
* resolve conflicts
* fix tyop (again)
* one last tweak
* Rough and ready back plate design
* Fix incorrect image markdown
* Add newline
* Words, use the right words
* Improved CAD, many depths, better instructions
* Add blanking plate to readme
* Missing newline
* Fix PR - 4mm version and typos
Must have been tired
* Add MGN12 Euclid mount, based on Trident carriage
* Add Trident check mark, and update readme to link to docks
* I always mess up markdown links like that
* nova printhead
stls and images
* Added nova printhead to readme table
beaugalbraith
* Added Nova Hotend to table
Capitalized to look better
* Updated readme
Fixed putting my mod in alphabetical order 🤦
mine goes after baltojikale now
* deleting my images directory
they were bad quality, deleting directory then uploading a new one.
* added new images directory
better quality images
* Updated readme to include image
* Afterburner Triple bowden and Spider Mount for 2020/3030 extrusions
* Printable orientation, removed spaces and renamed file
* Printable orientation, removed spaces and renamed file
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* TFT Display for Switchwire and Input Shaper mount for Afterburner
* Updated based on PR comments
* Updated STL so it doesnt hit the bed
* Utility Belt
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Removing mods
* Removed links
* First commit so I can see the README
* Finished instructions and added STL files
* Update README.md
* Update README.md
* Update README.md
Images were stretch funny on mobile, remove the height=<> argument to try to fix that
* Fix overhang greater than 45 degrees
* Found a few more overhangs that needed fixing
* Work in progress (so no index link) for ADXL mount
* Fix readme
* Fix readme some more
* Untested prints
Clearance for electronics cover
Board closer to motor giving more wire clearance
Cleaned up CAD
Suggested JST XH
* Update CAD and fix readme
* Reorientation and re-exporting
* Should stop fiddling - added extra support bracket for chain
* Integrating with main CAD noticed there wasn't space for cover
* Update CAD image with latest design
* Add hardware to cad
* Add clearance image and design process
* Adafruit variant - untested
* Add adafruit mentions
* Add to readme for PR
* Finish of ADXL readme
* Remove WIP from ADXL readme
* Fix orientation which largely seems to be a matter of chance in Fusion 360
* PR Changes
Reduced overhang, by also removing attempt to use M3 threaded inserts for a 2.5mm through hole in the Adafruit board
* Fix readme some more
* Update AB-BN-30_Hotend-E3D_REVO-front.stl
fixing a problem in the revo-fron stl
* Update AB-BN-30_Hotend-E3D_REVO-front.stl
tried to fix the geometry issue (fingers crossed!)
* LED mounting with integrated cable runs that go behind the Z-idlers.
* Need to change case of images directory
* Change case of Images directory
* Fix markdown
* Fix alphabetical ordering
* Create README.md
ADXL345 skirt keystone with 2 and 4pin microfit 3.0 connectors. I used what I had laying around.
It's based on alchemyEngine's iteration of the g-code buttons. You can also see how to use it there.
https://github.com/alchemyEngine/EnragedRabbitProject/tree/main/usermods/Skirt-Microfit-Inserts
* Add files via upload
* Create adxl345_skirt_keystone
* Fix skirt keystone
* Update README.md
* Update skirt.keystone.adxl345.jpg
* Update README.md
* Split parts
Update stl's
* Update README.md
Fixed typo's
* Adding support for Zodiac BMO and BMS
* fixed an issue with print orientation
* and rotate the front stl as well
* Update Readme.md
fixed the formatting error
* Initial Mod upload
* Updated main readme
* Revert "Updated main readme"
This reverts commit 46bc0c2cea.
* Update README.md
updated readme with links and fixed a typo
* Add files via upload
very slight change to a chamfer
* Add files via upload
slight changes to chamfer
* Update README.md
Added boingomw/Wago_mount
* Update README.md
fixed order
* Fix name and link in README.
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>
* Working picam mount with the best field of vision
* A little documentation
* Probably won't work on VSW, but maybe Trident
* Reduce image size and make jpg
* Fix typo
* Make link relative
Scotty Orr
Geoffrey Young
DorjeDorf
Akio
chri-kai-in
gen2eng
jlas1
AaronHerrick
Chris Lee
Ryan Wilson
hymness1
JoAnn Manges
beaugalbraith
bythorsthunder
Slidr666
Richard Mitchell
Frank Tackitt
Thiago Locatelli
hergtoler
kluoyun
khay8485
mandryd
Jason Ragsdale
Leandro Marceddu
Bart Lammers
spacelab2021
Adrian Keet
MikesMods
newphreak
boingomw
Mustafa Cosku KURT
Marc Pot
KiloQubit
120decibell
eddie
Derpimus
Marijn Siemons