15a143256b
In-Line Filament Dust Scrubber ( #577 )
...
* Create README.md
* Create Scrubby
* Delete Scrubby
* Create README.md
* Delete README.md
* Add files via upload
* Update README.md
* Create test
* Add files via upload
* Delete test
* Update README.md
* Update README.md
* Update README.md
* Delete Scrubby.STL
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
2022-04-04 06:41:49 -04:00
3ea38c4b9f
Lgx lite toolhead pcb mount ( #610 )
...
* Initial commit of LGX Lite toolhead PCB mount
* Added discord username
* Update README.md
* Change to threaded insert holes
Holes for threaded inserts step down to 3.4mm with a chamfer for printability
* Added spacer
Mount will interfere with the gears without washers or a spacer
* Changes due to adding spacer
* Update LGX_Lite_toolhead_PCB_mount.stl
Change to go with spacer
* Spacer and mount improvements
Should work better with the screw lengths
* Updated images and readme
* Added CAD folder and file
* Removed V0 check mark for LGX Lite toolhead PCB mount
* Update README.md
State how it was tested (version 3.2 of the toolhead PCB)
* Uploading untested PCB cover
* Rearrage
* Fixed readme
* Changed image
* jpg not jpeg
* Typo in readme
* Delete STL
* PCB cover
* Change to readme
* Update readme
* Update readme
* Added download instructions and image to readme
* Update readme
* Update readme
* Remove cover folder
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-04-03 18:52:34 -04:00
d336b43a0b
C92X_PsycHoShafts_Mount ( #665 )
...
* Create PsychoShaft
* Delete PsychoShaft
* Create README.MD
* Add files via upload
* Update README.MD
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Add files via upload
* Update README.md
* Delete C92X_Extrusion_Bracket.stl
* Add files via upload
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create CAD
* Delete CAD
* Create CAD
* Delete CAD
* Add files via upload
* Create CAD
* Delete CAD
* Create CAD FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Add files via upload
* Delete CAD FILES
* Delete C92X_Camera_Bracket.stl
* Delete C92X_Extrusion_Bracket - No Support Required.stl
* Delete C92X_Extrusion_Bracket - Requires Support.stl
* Delete C92X_Spacer_Arm.stl
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/STL. directory
* Create FILES
* Add files via upload
* Delete FILES
* Delete Voron_C92X_Camera_Complete.f3d
* Delete Voron_C92X_Camera_Complete.step
* Create FILES
* Add files via upload
* Delete FILES
* updated all stl's for PR
Updated CAD and STL finds, no longer requires support for all files.
2022-04-03 18:51:54 -04:00
253556d06f
add V0 No-Drop Nuts for door latches ( #671 )
2022-04-03 18:51:27 -04:00
33a8da178b
New mods: VSW_Double_60mm_Fan_Mount and AB_Turbo_Mod ( #668 )
...
* Added new mod 'VSW_Double_60mm_Fan_Mount'
* Added new mod 'AB_Turbo_Mod'
* AB_Turbo_Mod edits
Added photos
* AB_Turbo_Mod edits
Minor changes to improve print quality
* AB_Turbo_Mod edits
Minor edits to further improve print quality
* Added step file for each mod for GPLv3 compliance
2022-04-03 18:13:57 -04:00
830897cd6c
firmware_configurations/klipper: Fysetc S6 V2.1 ( #675 )
...
- V0.1 example config
- S6 V2.1 board pin aliases
2022-04-03 18:13:02 -04:00
f2db0fea5c
Update PULL_REQUEST_TEMPLATE.md ( #674 )
...
Update to add CAD requirement in either .STEP or .SCAD format (as openSCAD cannot export STEP files)
2022-04-01 11:51:24 -04:00
034a3b3053
Adding MKS Mosfet Mount ( #664 )
...
* Adding MKS Mosfet Mount
* Add image, part number and link to Mosfet
* fix link to Mosfet
2022-04-01 09:33:51 -04:00
94925a6c34
Revo Voron Added ( #652 )
...
* Revo Voron Added
by request, adding Revo Voron
* Fixed stl error on revo voron front
2022-03-31 19:06:03 -04:00
4960ffb761
Simplified klicky documentation ( #669 )
...
* Simplified klicky documentation
Moved all the setup to the klicky repository.
Updated the probe dock.
* removed duplicate dock
* photo links corrected
* corrected dock orientation
2022-03-31 12:58:42 -04:00
c5187ef5b1
Change stepper_z2 uart pin to PD15 as PD12 is incorrect and already used. ( #672 )
2022-03-31 12:57:33 -04:00
7c8888cf55
Add sample printer.cfg for Fysetc Spider 2.2 for Voron Trident ( #626 )
...
* Add sample printer.cfg for Fysetc Spider 2.2 for Voron Trident
* Fix comments to say Fysetc Spider instead of BTT Octopus
* Remove 'Common Temperature Sensors' section as it contained some outdated information
* Swap Left and Right Z Steppers to match Trident Manual
2022-03-19 14:52:46 -04:00
4058b94da0
Adding Kirigami bed led front ( #633 )
...
* Kirigami_LED_Bed_Front.stl
Kirigami bed front with space for LED (Neopixel or equivalent)
* Add files via upload
* Delete printer_mods/reQu1em00/Kirigami_LED_Bed_Front/STL directory
* Create README.md
* Create STL
* Delete STL
* Create STL
* Add files via upload
* Delete STL
* Update README.md
* update of readme to amend spelling mistake
* Delete Kirigami_LED_Bed_Front.stl
* Delete Kirigami_LED_Bed_Front_defuser.stl
* Create STL
* Delete STL
* Add files via upload
updated stls. Rechecked and, repaired
2022-03-19 14:48:10 -04:00
2575e29aad
Adding the Rainbow Barf Logo LED for Stealthburner ( #634 )
...
* Create README.md
* Create README.md
* Update README.md
* Added KiCad project files
* Create README.md
* Added production files
* Update README.md
Added note on mixing RGB and RGBW LEDs.
* Update README.md
typo
* Create README.md
* Update README.md
Added VinnyCordeiro's RGB LED grid for Stealthburner
* Add files via upload
Animated GIF of the board working
* Update README.md
* Update README.md
* Update README.md
Added the KiCad version that was used to design the PCB
2022-03-19 14:45:13 -04:00
5149e65364
CR Touch Probe "Snap Mount" for v2.4 (MGN9) ( #655 )
...
* Create README.md
* Added CR Touch Mount for v2.4 MGN9
* Update README.md
* Update README.md
* Update printer_mods README.md
2022-03-19 14:41:50 -04:00
c90527f57a
More robust belt paths for Voron Switchwire ( #657 )
...
* adding first version of the mod
* renaming the files to respect proper name
* fix formatting of readme
* add pics of install
* adding clarification in the readme
* readme formatting
* readme formatting
* better name and link to master readme
* table formatting fixes
Co-authored-by: Jan 'Yenda' Trmal <jtrmal@apptek.com>
2022-03-19 14:41:24 -04:00
e9b9e5948e
Add ab plug for gantry ( #600 )
...
* add ab plug for gantry
* Fix README spacing
* Update README
* Update README to remove 2.4 clip. Change to direct commit
* remove incorect README
* Update Main README
2022-03-16 18:37:34 -04:00
49f1df8abb
Klicky for v0 ( #580 )
...
* new file structure and v0 release
* Update README.md
* updated printer path
* V2 readme update
* Update Klicky_v0_family.jpg
* Update README.md
* pictures cleaning up
* corrected STL errors
* Create klicky_base.jpg
* corrected v0 stepper_y reference
* updated integrated cowling
* uploaded Dragonfly BMO cowlimg
With integrated klicky mount
* corrected Dragonfly cowling
* small flaw corrected on Sherpa mini cowling
2022-03-16 18:35:53 -04:00
13f3421308
Fix Z probe wiring... ( #636 )
...
Z endstop was shown as connected to Z+, but config file has it on
Z-.
Probe wiring was completely wrong.
Thanks to GadgetAngel for pointing this out.
2022-03-16 15:14:32 -04:00
1c9fadcad8
Update V0-Adafruit Pixel Sticks README ( #641 )
2022-03-16 15:12:21 -04:00
2e8c80aa92
Updated for 2.4r2 ( #645 )
...
* Create README.md
* Delete printer_mods/bythorsthunder directory
* Create README.md
* Add files via upload
* Added Image
* Create stls
* Add files via upload
* Delete stls
* Create cad
* Add files via upload
* Delete cad
* Create image
* Add files via upload
* Update README.md
* Delete Front_Idler_MGN9_Backer.JPG
* Delete image
* Delete printer_mods/bythorsthunder/MGN9_Backers/CAD directory
* Create cad
* Add files via upload
* Delete cad
* Update README.md
* Add files via upload
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Add files via upload
* Update README.md
Updated to reflect changes to Voron 2.4 with R2 release.
* Update README.md
Added BOM
* Update README.md
* Update README.md
* Add files via upload
Add stls for 2.4r2
* Create test
Added Folder for 2.4r1
* Delete test
* Create 2.4r1
Added 2.4r1 Folder
* Add files via upload
Moved Old files to new folder
* Delete 2.4r1
* Delete [a]_left_upper_belt_clip_MGN9_backer.stl
* Delete [a]_right_upper_belt_clip_MGN9_backer.stl
* Delete [a]_xy_chain_bridge_modified.stl
* Delete left_idler_upper_MGN9_backer.stl
* Delete right_idler_upper_MGN9_backer.stl
* Update README.md
* Add files via upload
Add CAD
* Delete Belt_Clamp.f3d
* Delete Front_Idler_A_Top_Modified.f3d
* Delete Front_Idler_B_Top_Modified.f3d
* Add files via upload
Updated Photos
* Add files via upload
* Update README.md
* Add files via upload
* Delete Front_Idler_MGN9_Backer.JPG
* Delete Rail_with_idler.jpg
* Delete Rails_installed.JPG
* Update README.md
2022-03-16 15:09:55 -04:00
5147698542
Ellis/Bed_Fans: Update readme, fix bug where M190 S0 would cause Klipper to wait indefinitely ( #649 )
...
* fix potential lock up with M190 override
It's common to have a slicer configured to send "M190 S0" before PRINT_START (to discourage the slicer from inserting it's own M190.) Klipper's handling of "M190 S0" is to ignore the command instead of waiting for the bed to cool to a temperature it likely will never reach. This change fixes the bedfans.cfg version of M190 to also ignore a S0 parameter (and doesn't freeze the entire printer waiting for the bed to cool to 0 degrees.)
* update
* update
* update
* update
Co-authored-by: garyd9 <garyd9@gmail.com>
2022-03-16 15:07:26 -04:00
194bd78df4
Update design with detent as suggested by devincody ( #650 )
2022-03-16 15:06:01 -04:00
6f41ddac2b
Belts Holder for v0 ( #542 )
2022-03-16 15:02:27 -04:00
035f700b57
keeping LGX current with MGN12/Trident info and mod (plus some extras) ( #596 )
...
* add MGN12/Trident information and mod, also a few helpful extras
* update links
* add SB notes
2022-03-16 14:50:27 -04:00
e0a76a50e8
Add LRS PSU screw terminal cover ( #604 )
...
* Add LRS PSU screw terminal cover
* Fix typo in README
* Update main README
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-03-16 14:49:32 -04:00
ae7937dc0e
Hartk mod update for 24r2 ( #638 )
...
* 24r2 mod updates
updated pin mod for 24r2, moved old files but moved to "old" folder
renamed and removed confusing GE5C files
added trident pin mod
* Update README.md
* renamed files
* added images
* Update README.md
* Update readme.md
* fixed printing orientation
* Update README.md
2022-02-23 18:45:28 -05:00
362d4f21f0
Add 4 channel relay under deck mount ( #599 )
...
* add 4 channel relay
* Update README
* Create mods index readme at root samwiseg0 folder
* Update Main README
* Remove Pi bootscreens
* Do not remove trailing space
2022-02-17 16:55:54 -05:00
7f66b8cbcc
Updated README file to explain issue with the Circuit Design Space Software. ( #629 )
...
* Create Bed Support Alignment Tools
* Update README
* Update README
* Update README
* Update README
* Update README
* Updated README
* Update README
* Update README
* Fix CAD filename
* Updated README
* Initial comit
* Update README file
* Update README
* Update README
* Update README
* update main README
* update main README
* fix missing ')' on footnote 1
* Update README
* Inital Commit for Octopus V1.1 Color PIN Diagram
* Update README file
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Add footnote about MOTOR_PWR_IN Fuse if >24V used
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_Pro_V1.0_Color_PIN_Diagram directory
* Delete printer_mods/GadgetAngel/Bigtreetech_Octopus_V1.1_Color_PIN_Diagram directory
* Shorten filename
* Update README
* update README
* Update README
* update README
* update README
* update README
* update README
* update README
* update README
* Update README
* update README
* update README
* Shoten Filenames
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update README
* Update Voron 0.1 design
Co-authored-by: GadgetAngel <joanmanges@gmail.com>
2022-02-16 09:20:40 -05:00
7a217221ac
Add esp8266 nodemcu din mount ( #602 )
...
* Add esp8266 nodemcu din mount
* Update din clip link
* Update esp8266 mount to be universal
* Fix Din clip link
* Remove 2.4 din clip
* Update main readme
* Add link to what an esp8266/nodemcu is
* Update README to include WLED information
2022-02-13 12:36:04 -05:00
f9b123b81f
Adafruit adxl board changed size ( #613 )
...
* Address issues found by PineappleTuesday
* Fix IGUS mount for GY-291 and change file names for clarity
* Change Adafruit to reflect new CAD
https://learn.adafruit.com/adxl345-digital-accelerometer/downloads
2022-02-13 12:17:48 -05:00
5b152020c2
fix: Rapido mount for ABBN for stock AB ( #619 )
2022-02-13 07:06:18 -05:00
b86d7ead31
Add V2.4 corner cable hide ( #601 )
...
* Add corner_cable_hide
* Update main README
* Update files to be able to print right side up
2022-02-05 06:09:24 -05:00
0b1066d0d2
Mantis Dual 5015 - Usermods, More Hotend support(Mosquito, Rapido, Crazy Volcano), Redo Documentation, plus more. ( #594 )
...
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Update magprobe.md
* Add files via upload
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Add files via upload
* Delete carriage_assembly_hotend_mount.jpg
* Add files via upload
* Add files via upload
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left_cut_fan_ears.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right_cut_fan_ears.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v1.037.stl
* Add files via upload
* Update firmware_slicer_settings.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Delete Readme_v1.07.pdf
* Delete README.md
* Delete Macros_and_Config.txt
* Delete printer_mods/Long/Mantis_Dual_5015/images directory
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete printer_mods/Long/Mantis_Dual_5015/tmp directory
* Delete duct_rapido_v0.02_left.stl
* Delete duct_rapido_v0.02_right.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.01.stl
* Add files via upload
there was a slight interference between duct and hotend mount in 0.01. fixed this
* Update readme.md
* Add files via upload
* Delete Hotend_Mount_Dragon_v1.037.stl
* Delete duct_v1.037_Left.stl
* Delete duct_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Add files via upload
* Delete Hotend Mount_Rapido_v.02.stl
* Add files via upload
* Delete duct_rapido_HF_v0.02_left.stl
* Delete duct_rapido_HF_v0.02_right.stl
* Add files via upload
* Add files via upload
* Delete Magprobe Longs Rapido UHF v0.4.stl
* Delete Magprobe_v0.31_Crazy_Volcano.stl
* Add files via upload
* Delete Hotend Mount_Rapido_v.03.stl
* Add files via upload
* Add files via upload
* Update readme.md
* Update bom_acknowledgements.md
* Update magprobe.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Update readme.md
* Add files via upload
Upper mount rotated 120 degrees. This varies depending on how your rapido was assembled.
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Update 1.8_trident.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Delete duct_dragon_crazy_volcano_v0.3e_left.stl
* Delete duct_dragon_crazy_volcano_v0.3e_right.stl
* Add files via upload
* Delete duct_rapido_HF_v0.03_left.stl
* Delete duct_rapido_HF_v0.03_right.stl
* Add files via upload
* Delete duct_dragon_v1.037_Left.stl
* Delete duct_dragon_v1.037_Right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.02_left.stl
* Delete duct_rapido_UHF_v0.02_right.stl
* Add files via upload
* Delete printer_mods/Long/Mantis_Dual_5015/CAD directory
* Add files via upload
updated CADs to include newer versions of ducts which have tighter fit to the hotend mount
* Delete Mantis_MGN12_CrazyVolcano_v0.03.step
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Delete duct_rapido_UHF_v0.03_left.stl
* Delete duct_rapido_UHF_v0.03_right.stl
* Add files via upload
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Delete duct_brace_v1.0.stl
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Add files via upload
* Add files via upload
* Update readme.md
* Add files via upload
* Update final_assembly.md
* Update final_assembly.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Update readme.md
* Update bom_acknowledgements.md
* Update print_orientation.md
* Update carriage_assembly.md
* Update magprobe.md
* Update firmware_slicer_settings.md
* Update 1.8_trident.md
* Update final_assembly.md
* Delete printer_mods/Long/Mantis_Dual_5015/Usermods directory
* Update bom_acknowledgements.md
* Update readme.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update bom_acknowledgements.md
* Update bom_acknowledgements.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Update carriage_assembly.md
* Add files via upload
* Update final_assembly.md
* Update readme.md
* Update readme.md
2022-02-02 18:53:59 -05:00
c4a0ac1ac9
Add extrusion thermistor mount ( #603 )
...
* Add extrusion thermistor mount
* Update main README
2022-02-02 18:40:19 -05:00
6c08e8886f
Add voyager gtx din mount ( #607 )
...
* Add voyager gtx din mount
* Update din clip link
* Update mount to be universal to work with trident din clip or 2.4
* Fix din clip link
* Add M2x10 to BOM
* Update Mod README & Main README
2022-02-02 18:30:06 -05:00
5599b345c7
Add microfit 2x3 skirt connector (ADXL) ( #605 )
...
* Add microfit 2x3 skirt connector (ADXL)
* Add to Main README
2022-02-01 10:49:25 -05:00
5b74b804d2
Fix reversal of UARTs for z2/z3 ( #597 )
2022-01-26 13:59:16 -05:00
4698211675
Update readme.md: Notes about Igus EGLM vs KGLM ( #592 )
2022-01-24 16:37:56 -05:00
3cd8c17e7d
Exhaust Adapter for 100mm ventilation systems ( #550 )
...
* initial pull request for Angry CAM USB module
* corrected readme.md file
* updated readme.md file and removed obsolete images
* added missing images for cable path description
* remove obsolete images
* removed spaces from all file names and added more pictures to the readme.md
* reduced number of pictures and corrected typos in ReadMe.md
* added exhaust adapter for 100mm ventilation systems
* update of ReadMe.md files to correct typos and add more mounting information
* removed space characters from names
* corrected link to *.stl file
* added newline as trigger for CI to Readme.md
Co-authored-by: cbc02009 <39525900+cbc02009@users.noreply.github.com>
2022-01-24 16:37:37 -05:00
852aae11ce
V0 skirt, add Adxl connector ( #521 )
...
* init
* Create README.md
* Update README.md
* PowerSwitch
* NamePlate
* images
* file rename
* Update README.md
* Create img5.jpg
* move
* Update img5.jpg
* Create img6.jpg
* Update README.md
* img7,8
* Update README.md
* Update README.md
* Create img9.jpg
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Delete Skirt_EmptyNamePlate.stl
* Create Skirt_EmptyNameplate.stl
* Update README.md
* Delete img0.jpg
* Update README.md
* Update README.md
* Update README.md
* Delete img9.jpg
* update images
* Create Skirt_adxl.stl
* Create img9.jpg
* Update README.md
* Update README.md
* Update README.md
* V0.1
* V0 Skirt set Trident column
Co-authored-by: tz <48024745+Zen3Dhu@users.noreply.github.com>
2022-01-24 14:38:51 -05:00
10aa02c7c2
V01 trident skirt remix ( #556 )
...
* Change docs, add tophat files WIP
* Update README.md
* Update README.md
* Update README.md
* change image
* Update README.md
* add renders
* add renders
* Update README.md
* add renders
* Update README.md
* Update README.md
* add render
* Update README.md
* add single file tophat
* replace corner
* Update README.md
* add live photos
* change pics size
* fix stl
* Create readme.md
* Update readme.md
* Add files via upload
* Update readme.md
* Update readme.md
* Update README.md
* Add files via upload
* move cad files
* add cad file
* Update README.md
* add hinge standalone
* Update README.md
* Update README.md
* Add plain front skirt, single and sliced version, add rear leg with bowden tube connector
* Update README.md
* Update README.md
* Update readme
* Update README.md
Update readme
* Update README.md
fix readme
* Add Manual
* removed part - needs polishing
* Revert "removed part - needs polishing"
This reverts commit 034ee9aeb1
2022-01-24 14:34:58 -05:00
1f8c6a567a
Add Raspberry Pi Zero Bracket to printer_mods ( #562 )
...
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Delete Render_of_Raspberry_Pi_Zero_Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
* Add Raspberry Pi Zero Bracket
* Raspberry Pi Zero Bracket
2022-01-24 14:31:30 -05:00
e62fd8e8b5
Switchwire Clean Front Middle Grill ( #570 )
...
* Update README.md
Added MakeALeft to table
* Clean Front Middle Grill for Switchwire
* Delete front_mid_grill_no_magnets.stl
* Switchwire Clean Front Middle Grill
* missed Trident not supported X
* Installation note added
* fixed last change
* Update README.md
2022-01-24 14:31:09 -05:00
c5a03713ac
Adding an area to share the various Parts, Jigs and Mods that I use. ( #587 )
...
* Adding an area to share the various Parts, Jigs and Mods that I use.
* Repaired file
* Added Trident checkmark.
* Split Legacy mount into two files.
2022-01-23 12:02:03 -05:00
61a81d9006
V0.1 Spool Holder using Side Panel Clips ( #581 )
...
* Update README.md
* Initial commit
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* add folder
* Delete a
* Update readme.md
* Create Cornerpanel_Spoolholder.png
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* update STL and image
* Add Several Versions of Cornerpanels
* Update CAD
* Update CAD SH
* Update readme.md
* Update readme.md
* Add Photo
* Update readme.md
* Create IRL.jpg
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
2022-01-21 11:22:09 -05:00
24276d383c
Corrected adjustable clip STP ( #584 )
...
Replaced current STP file (which was a duplicate of 4mm clip) with the correct version.
2022-01-21 11:15:32 -05:00
cd727a29c5
LGX_Lite ( #563 )
...
* Create README.md
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
* Delete LGX_Lite_Chainmount_IGUS.stl
* Add files via upload
* Update README.md
* Update README.md
* Add files via upload
address incompatibility with trident carriage
* Add files via upload
fixed tolerance
* Add files via upload
fixed orientation after previous commit.
* add mounting image
* add mounting image
* Fix image text
* generic mount tested
generic mount tested and reported working. removing warning
* Update README.md
added instructions on how to install and changed layout
2022-01-21 11:14:12 -05:00
59224373bb
Add Jumpers configuration for SKR2 ( #583 )
...
* Initial work for BTT SKR2
* Fix typo in file name
* Remove old file
* Beautify README
* Cleanup PINs definition
* Revert back commented stuff for build size
* Remove the Rev.B in the name
* Remove old files
* Add wiring diagram for MCU X/Y/E
* Update readme file
* Add wiring diagram for MCU Z
* Add Klipper menuconfig selection
* Change instructions order
* Merge latest updates from master
* Add line return
* Update recommended settings
* Comment out recommended sensor
* Comment bed sensor
* Use controller fan instead
* Remove old thermistor types
* Put back heater_bed
* Add heater and stepper relation for controller fans
* Remove stepper and space
* Add missing Jumpers configuration
* Add missing Jumpers configuration
Co-authored-by: Marc Bernard <marc.guy.bernard@gmail.com>
2022-01-18 18:39:09 -05:00
6d339c23ae
Initial pull request for BTT SKR v2 config ( #574 )
...
* Initial work for BTT SKR2
* Fix typo in file name
* Remove old file
* Beautify README
* Cleanup PINs definition
* Revert back commented stuff for build size
* Remove the Rev.B in the name
* Remove old files
* Add wiring diagram for MCU X/Y/E
* Update readme file
* Add wiring diagram for MCU Z
* Add Klipper menuconfig selection
* Change instructions order
* Merge latest updates from master
* Add line return
* Update recommended settings
* Comment out recommended sensor
* Comment bed sensor
* Use controller fan instead
* Remove old thermistor types
* Put back heater_bed
* Add heater and stepper relation for controller fans
* Remove stepper and space
Co-authored-by: Marc Bernard <marc.guy.bernard@gmail.com>
2022-01-17 21:54:37 -05:00
LJ
Autocrit
Paul
Sascha Ohms
Maximilian Förg
Chris Lee
Tim Abraham
Mike Thomas
AaronHerrick
jlas1
Rich Edelman
reQu1em00
VinnyCordeiro
jjgraphix
Jan "yenda" Trmal
samwiseg0
Stephen Hurd
bythorsthunder
AndrewEllis93
Richard Mitchell
TheSquiffy
Geoffrey Young
hart
JoAnn Manges
Bart Lammers
mandryd
Samori Gorse
chri-kai-in
tz
Damian Gola
D4rkCelerity
makealeft
Steve Peterson
Keith
Wile.e
Mrgl-Mrgl
TechnoPhreak