22 KiB
22 KiB
Legacy Mods
Printer mods for legacy Voron 3D printers Remember to update this README when uploading new mod!
Table structure
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
| Creator | Mod title | Description | V1.6 | V2.1 | V2.2 |
|---|---|---|---|---|---|
| 3D_Black | Fan Covers | Different fan covers for 40mm fans | ✔️ | ✔️ | ✔️ |
| agsolino | RunOut Filament Holder | Holder for TriangleLab Runout sensor | ❔ | ❔ | ✔️ |
| RS-25-5 Rotated | RS-25-5 PSU mount rotated 90 Degrees | ❔ | ❔ | ✔️ | |
| Andreq | Mobius Shaft Jig | Tool used for grinding flats on a shaft at specific places | ✔️ | ✔️ | ✔️ |
| Armstr0ng | Led extrusions mount | A mount for aluminium LED extrusions with hidden fasteners | ❔ | ✔️ | ✔️ |
| ArmyAg08 | Logitech Camera Mounts | Different Logitech camera mounts, attached to the extrusions. Fits C270 and C310 | ✔️ | ✔️ | ✔️ |
| Corner Panel Clip | Corner panel clip that fit 3mm or 1/8" panels with foam tape | ❌ | ✔️ | ✔️ | |
| Badnoob | Serial Plate | Modified skirt piece to display your serial number | ❌ | ❌ | ✔️ |
| bryansj | Rotated Pi Mount with Heatsink | Raspberry Pi with Heatsink Frame for minimal channel width | ✔️ | ✔️ | ✔️ |
| Keystone Jack Universal Skirt Insert | Keystone Jack Insert to fit into any hexagonal hole in the skirt | ✔️ | ✔️ | ✔️ | |
| Befenybay Chain Anchors | Befenybay 10x11 Drag Chain Top Anchor and 2020 Extrusion Mount | ❌ | ✔️ | ✔️ | |
| blamm | Blind Joint Drilling Jigs | Jigs to drill your blind joints in the right spot | ✔️ | ✔️ | ✔️ |
| HEPA Filter Housing | HEPA Filter Housing for cheap Roomba filters | ✔️ | ✔️ | ✔️ | |
| Relay module bracket | Relay module (4 channel) mount | ✔️ | ✔️ | ✔️ | |
| cadriel | Triangle Lab Filament Sensor Mount | Triange Lab filament sensor mounts | ❔ | ❔ | ✔️ |
| Cerulean | Respooler | Respool tangled spools or bad koils | ✔️ | ✔️ | ✔️ |
| chilicoke | Low Profile Exhaust Duct | Quick-release exhaust duct adapter that requires minumal rear spacing | ❔ | ✔️ | ✔️ |
| christophmuellerorg | Duet Maestro mount for Voron 2.2 | Duet Maestro mount for V2.2 | ❌ | ❔ | ✔️ |
| FYSETC Panel Due 5i | Standard LCD compatible holder for the FYSETC integrated panel due | ❌ | ❔ | ✔️ | |
| Mains plug panel for the RND_165-00057 | Mains plug panel for the RND_165-00057 Filter/Switch combination | ❌ | ❔ | ✔️ | |
| Danowar | Dual Mobius Mount | Mounts two Mobius Extruders to the back of the printer | ✔️ | ✔️ | ✔️ |
| F6 Board Mount | Mounts for FYSETCS F6 controller boards | ✔️ | ✔️ | ✔️ | |
| Humidity Sensor Bracket | Mount for Humidity/Temperature sensor | ✔️ | ✔️ | ✔️ | |
| Load Cell Spool Holder | Spool holder with built in weight scale | ❌ | ✔️ | ✔️ | |
| TL 2-to-1 Mosquito Toolhead Adapter | Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead | ✔️ | ✔️ | ✔️ | |
| Tablet mount | Detachable mount for tablet using magnets | ✔️ | ✔️ | ✔️ | |
| V2.2 Wrench | 3 sided wrench for 2.2 bearing caps and panel clips | ❌ | ❌ | ✔️ | |
| Alternative Z Chain | Alternative mounting for Z-Axis zipchain | ❌ | ✔️ | ✔️ | |
| daveidmx | 30mm Fan Adapter | 30mm Fan Adapter | ❔ | ❔ | ❔ |
| Dunar | Panel Rest | External panel holder | ✔️ | ✔️ | ✔️ |
| etherwalker | Pi Zero Camera Mount | Pi Zero Camera Mount | ❔ | ❔ | ❔ |
| exquyre | Anet 12864 Display | Case for Anet 12864 LCD display | ✔️ | ✔️ | ✔️ |
| LED Bar Mount | Mount for 12V LED bars to the top extrusions | ❔ | ✔️ | ✔️ | |
| Cable Cover Insert | Room for 3-4 20AWG wires | ❔ | ❔ | ❔ | |
| Einsy + RAMPS Combo | Mounting bracket for 1 Einsy and 1 RAMPs | ✔️ | ✔️ | ✔️ | |
| FHeilmann | Voron 2.1 5mm Parts | Parts modified for extrusions with 5mm gap. | ❌ | ✔️ | ❌ |
| Fulg | PanelDue5 LCD Mount | Mount for the PanelDue5 LCD display | ✔️ | ✔️ | ✔️ |
| GSL12 | WAGO 221 Mounts | Wago 221 mounts for the electronics bay | ✔️ | ✔️ | ✔️ |
| Gamsche | Keystone Skirt Panel | 25mm skirt panel with integrated keystone jack. Use with 50mm smaller adjacent skirts for proper fit. | ❔ | ❔ | ✔️ |
| Glowtape | MKS GenL 1.0 Mounting Bracket | MKS GenL 1.0 Mounting Bracket | ✔️ | ✔️ | ✔️ |
| GustavTheMighty | 4.3 PanelDue Case | Case/mount for the 4.3 PanelDue LCD Display | ✔️ | ✔️ | ✔️ |
| Iakabos | Mini12864 Display Mount | Case and mounting arms for a Fysetc Mini12864 display | ❔ | ✔️ | ✔️ |
| Hackdoggo | BMGobius | Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears | ✔️ | ✔️ | ✔️ |
| hiemmer | Tool Holders | Tool holder for calipers, screwdriver etc | ❔ | ❔ | ❔ |
| JaredC01 | Mini 12864 Voron Knob | Upgraded knob for Fystec Mini 12864 RGB LED Display | ✔️ | ✔️ | ✔️ |
| Keystone Power Panel | Power Panel with 1 or 2 Keystone Jacks | ❌ | ✔️ | ✔️ | |
| Mosfet Mounts | Mosfet Mount for 4 or 6 Mosfets | ✔️ | ✔️ | ✔️ | |
| Jasperkm | 5mm panel mounting | Edited panel clips for 4mm panel + 1mm foam tape | ❌ | ✔️ | ✔️ |
| Brush holder | Brush holder next to printbed | ❌ | ✔️ | ✔️ | |
| Cable management | Cable trunking and 2020 slot cover | ❌ | ✔️ | ✔️ | |
| Exhaust fan guard | VORON styled fan guard for exhaust fan 120mm | ❌ | ✔️ | ✔️ | |
| Fire alarm mount | Mount for a small fire alarm on the back of the printer | ✔️ | ✔️ | ✔️ | |
| LED strip holder | Mount for led strips at an angle at the top of the printer | ✔️ | ✔️ | ✔️ | |
| Panel key wrench | Wrench for panel keys for ease of turning | ❌ | ✔️ | ✔️ | |
| Simple tool holder | Holder for 3 small tools using magnets | ✔️ | ✔️ | ✔️ | |
| Skirt mods | Some mods the skirts for fans and a clock | ❌ | ✔️ | ✔️ | |
| Jass_on | Tempered glass clips/handle | Panel clips and handles for using tempered glass side panels | ❌ | ✔️ | ❔ |
| Rear panel clips | Rear Panel Clips | ❌ | ✔️ | ❔ | |
| SKR 1.3 Cooling bracket | SKR 1.3 mount with built in 40mm fan mount | ✔️ | ✔️ | ✔️ | |
| JeJeff | 2020 Extrusion slot cover | Slot covers for extrusions with 5mm slot width | ✔️ | ✔️ | ✔️ |
| Cable Tie Mount | Cable tie mounts for 4mm cable ties | ✔️ | ✔️ | ✔️ | |
| Main Plug Panel | Main Plug Panel modified to hold a RJ45 ethernet socket | ✔️ | ✔️ | ✔️ | |
| Jink | Coroplast mount | Mount / Bracket supporting the coroplast sheets | ❌ | ✔️ | ❔ |
| Filament runout sensor mount | Filament runout sensor mount | ❌ | ✔️ | ❔ | |
| Left handed RAMPS mount | Mirrored RAMPS bracket | ✔️ | ✔️ | ✔️ | |
| Spool holder with scale | Spool holder with scale | ❌ | ✔️ | ❔ | |
| WAGO Mount | Mount for 3x WAGO connectors | ✔️ | ✔️ | ✔️ | |
| JustinVoelker | Mains Plug Panel with RJ45 | Mains plug panel with ethernet cutout | ✔️ | ✔️ | ✔️ |
| K1JWG | PanelDue 7i Custom Logo | Custom Voron 2 logo for use as a PanelDue 7i startup splash screen | ✔️ | ✔️ | ✔️ |
| manfre | Openbuild chain ends | Cable chain ends to use off the shelf chains with Voron parts | ❌ | ✔️ | ✔️ |
| masgar | VoltAmpMeter panel insert | Mounting panel for VoltAmpMeter | ✔️ | ❌ | ❌ |
| BTT SKR Mini v1.1 mounting frame | Mounting frame for BigTreeTech SKR Mini v1.1 | ✔️ | ✔️ | ✔️ | |
| 2-in-1 hotend housing | Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend | ✔️ | ✔️ | ✔️ | |
| meteyou | Gcode Buttons | Buttons in the skirt to execute gcode | ❔ | ✔️ | ✔️ |
| mildw4ve | Beltchain Remake | Beltchain Remake for Voron 2.2 | ❌ | ❌ | ✔️ |
| IR Probe Mount | DUET IR Probe Mount | ❌ | ❌ | ✔️ | |
| Nashuar | IKEA LEDBERG Spot Mount | LED Spot mount for IKEA LEDBERG | ❔ | ✔️ | ✔️ |
| WaveShare 7" Screen Mount | Display Case for 7" Waveshare LCD | ❔ | ❔ | ✔️ | |
| nemgrea | Magnetic Split Front Door | Hinges, handles and magnet mounts for creating a split front door panel | ❌ | ✔️ | ❔ |
| 5mm Coroplast Hardware | 5mm Coroplast Hardware | ❔ | ❔ | ❔ | |
| Toolhead Indicator Mounts | Toolhead Indicator Mounts | ❔ | ❔ | ❔ | |
| OrkusMG | Waveshare 5 Inch LCD Cover | Display Cover for the Waveshare 5 inch HDMI LCD screen | ✔️ | ✔️ | ✔️ |
| Dragon Toolhead | Dragon Toolhead | ❔ | ❔ | ❔ | |
| Voron Swivle Front LED Bar | Voron Swivle Front LED Bar | ❔ | ❔ | ❔ | |
| PhilLeMint | c920 Mount | c920 Camera Mount | ❔ | ✔️ | ✔️ |
| Panel Mounting | Panel Clips for 3/32" Foam Tape | ❔ | ✔️ | ✔️ | |
| Dual LED Light Mount | Mounts for Dual LED Bar | ❔ | ✔️ | ✔️ | |
| Velocity Stack | Velocity Stack Fan Cover | ❔ | ✔️ | ✔️ | |
| Indicator Mount | Mount for Indicator | ❔ | ✔️ | ✔️ | |
| pnokel | Cable Zipper | Small mount to secure wires with zip ties | ✔️ | ✔️ | ✔️ |
| Coroplast holders | Different coroplast holders for added support | ❌ | ✔️ | ❔ | |
| Toothed Idler | 14.5mm toothed idler | ❌ | ❌ | ❌ | |
| przybybr | V2.1 Omron Mount | Mount for Omron probe in V2.1 | ❔ | ✔️ | ❌ |
| Railgunner | Dual Direct Drive X Carriage | Dual direct drive using 2x Bondtech BMG | ❔ | ❔ | ❔ |
| Randommen96 | LCD bracket extended | LCD bracket extended for 6mm panels | ❔ | ❔ | ✔️ |
| Led strip mount DIODER | Led strip mount for Ikea Dioder | ❔ | ❔ | ✔️ | |
| PSU bracket | PSU AIO bracket for 5v, 12v and 24v | ❔ | ❔ | ✔️ | |
| Raspi cam mount | Cam mount for alie raspi cams | ❔ | ❔ | ✔️ | |
| schlank | Turbocharger | Alternative fumes extraction solution | ❌ | ✔️ | ✔️ |
| Minima | Minimalistic Fysetc Mini12864 display mount | ❌ | ❔ | ✔️ | |
| Seamen | RAMPS Extender Holder | Mount for RAMPS board with the stepper extender | ✔️ | ✔️ | ✔️ |
| Slidr | Panzer Chain | Alternative energie chain | ❔ | ❔ | ✔️ |
| Sparreau | 5V Power Supply Mount | 5V Power Supply Mount | ✔️ | ✔️ | ✔️ |
| FSR Circuit Mount | Bracket for mounting the FSR PCB. | ❌ | ✔️ | ❌ | |
| Z Rail Stop | Z Rail Stop | ❌ | ✔️ | ✔️ | |
| Bed Extrusion Spacer | Bed Extrusion Spacer | ❌ | ✔️ | ✔️ | |
| Dial Indicator Fan Mount | Dial Indicator Fan Mount | ❔ | ❔ | ❔ | |
| Mains Plug Panel Parametric | Scalable mains plug panel with small modifications | ✔️ | ✔️ | ✔️ | |
| Z Idler Frame Extra Tab | An extra tab added to the Z idler to prevent sagging / rotation | ❌ | ✔️ | ❌ | |
| sporadic | 10x15 Chain Z Mounts | End Z mounts for 10x15 Befenybay Drag Chain | ❔ | ✔️ | ❔ |
| 30A Relay Mount | Mount for a 30A relay module available on Amazon | ❔ | ✔️ | ✔️ | |
| Dual RS-25 Mount | Dual mount for side by side RS-25 supplies | ❔ | ✔️ | ✔️ | |
| Dual SKR 1.3 Mounts | Dual mounts for side by side SKR 1.3 controllers with fan and fanless options | ❔ | ✔️ | ✔️ | |
| Wago 221-415 Mount | Mount for a single Wago 221-415 | ❔ | ✔️ | ✔️ | |
| Stephan | M12 Probeholder | Drop in replacement of the stock probe to a M12 | ❔ | ✔️ | ❔ |
| BlTouch Mount | Drop in replacement of the stock probe to a BLTouch | ❔ | ✔️ | ❔ | |
| steve450 | Corner Brackets | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics | ❔ | ✔️ | ❔ |
| synfinatic | Duet Fan Mount | Duet/Duex fan mount with air vents directly above the steppers to increase airflow | ✔️ | ✔️ | ✔️ |
| E-Stop Switch | Mount for emergency button attached to the top of the printer | ❌ | ✔️ | ❔ | |
| Filament DryBox | Mount for filament drybox attached to the side of the printer | ❌ | ✔️ | ❔ | |
| LED Mount | Mount for LED lightbars | ❔ | ✔️ | ✔️ | |
| PS Extra Bracket | Extra bracket to keep the power supply in place | ❔ | ❔ | ❔ | |
| RJ45 Mount | Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient | ❔ | ❔ | ❔ | |
| Trippinonaduck | Switch Holder | Holder for Anit-Vandal Switches mounted in skirt holes | ❌ | ✔️ | ✔️ |
| LRS-75-5 | Mount for LRS-75-5 Power Supply | ✔️ | ✔️ | ✔️ | |
| warriorofwire | Openbuilds Drag Chain 2.1 | Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck | ❌ | ✔️ | ❌ |
| Openbuilds Drag Chain 2.2 | Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck | ❌ | ❌ | ✔️ | |
| Direct Drive BMG-m mount | Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo | ❔ | ✔️ | ✔️ | |
| wile.e.coyote | Coroplast Support | Support for the coroplast to prevent sagging | ❌ | ✔️ | ❔ |
| Dual Buck Bracket | Mounting bracket for 2 buck converters | ✔️ | ✔️ | ✔️ | |
| Nozzle Scrubber Mount | Mount for brass brush. Used for cleaning nozzle before printing | ❌ | ✔️ | ✔️ | |
| Wago Mounts | Different mounts for Wago connectors | ✔️ | ✔️ | ✔️ | |
| Xile | AfterBurner Umbilical | Supports a umbilical setup, on AB, taking the strain off connectors | ❔ | ❔ | ✔️ |