History

Florian Heilmann 9297c345a3 Add STL section to all metadata files		2024-01-08 17:38:25 +01:00
..
.metadata.yml	Add STL section to all metadata files	2024-01-08 17:38:25 +01:00
Duet_Fan_Bracket.f3d	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00
README.md	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00
duet-mount-a.stl	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00
duet-mount-b.stl	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00
duet-mount-fan-a.stl	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00
duet-mount-fan-b.stl	Restructure repository for new Voron printers	2020-05-07 20:30:33 +02:00

README.md

Duet/Duex Fan Mount

Overview

If you want fans to cool the steppers on your Duet or Duex2/5 then you'll want these optional mounts. They're a bit stronger then the default Voron mounts and allow easy repositioning of the brackets without having to use additional standoffs.

Please note that these files require your slicer settings to be able to perform basic bridging. No supports are required. You must print at 0.2mm layer hight so that the single layer bridge for the duet screw mounts is printed correctly.

Requirements

Printed Parts:

1x each of the included brackets printed at 0.2mm layer height

Hardware:

2x 40x40mm fans. Either 10mm or 20mm fans will do
8x M3 bolts which are 5mm longer then your fans are deep
4x M5x8mm bolts