65 lines
1.9 KiB
Markdown
65 lines
1.9 KiB
Markdown
# LGX Lite Toolhead Setup For Voron V0.1
|
||
|
||
|
||
|
||
## AN ALTERNATIVE TO THE VORON ORIGINAL SETUP
|
||
|
||
### The Mini After-LGX-Lite
|
||
|
||
Designed by Olof Ogland, based on a draft design by Nemgrea.
|
||
|
||
This project also includes:
|
||
|
||
- Mounts for several hotends;
|
||
- AdaFruit and Generic ADXL345 accelerometer mounts – for Klipper’s input shaping tuning;
|
||
- Z-axis Bed Adjustable Y offset set – to allow the print bed to move back and forth from -1 up to +3.5 mm.
|
||
- Klicky – a z-probe mount that attaches with magnets
|
||
|
||
### License and Credits
|
||
|
||
License:
|
||
https://github.com/VoronDesign/Voron-0/blob/Voron0.1/LICENSE
|
||
|
||
Original source:
|
||
https://github.com/VoronDesign/Voron-0
|
||
|
||
Credits:
|
||
Nemgrea, DaveR, JosAr
|
||
|
||
Source for Klicky integration:
|
||
https://github.com/jlas1/Klicky-Probe
|
||
|
||
|
||
## Mini After-LGX-lite
|
||
|
||
Most screws required to perform the installation should be already on your kit. You may need some additional sizes and types. The following list identifies them:
|
||
|
||
- 2x M3x6 BHCS for belts
|
||
- 2x M3x30 BHCS for LGX Lite
|
||
- 4x M2.5×6 low profile for Copperhead
|
||
- 2x M3x10 BHCS LGX Lite to cowling
|
||
|
||
### Cowling Universal
|
||
|
||
### Hotend Mount MOSQUITO 3007 Fan
|
||
|
||
### Hotend Mount MOSQUITO 3010 Fan
|
||
|
||
### Hotend Mount COPPERHEAD Screw Mount 3007 Fan
|
||
|
||
### Hotend Mount COPPERHEAD Screw Mount 3010 Fan
|
||
|
||
### Hotend Mount DRAGON 3007 Fan
|
||
|
||
### Hotend Mount DRAGONFLY 3007 Fan
|
||
|
||
### Hotend Mount DRAGONFLY 3010 Fan
|
||
|
||
### X-Carriage
|
||
|
||
|
||
## Tools
|
||
|
||
### PTFE Cutting Jig
|
||
|