d8f6b1ecc2
* Mini_After-LGX-Lite Mini_After-LGX-Lite * Update README Update README * Update README.md Updated README.md * Update README Update README * adj print orientation adj print orientation * Delete printer_mods\Mini_After-LGX-Lite folder * Renamed folder, removed spaces * Adj STL orientation * repaired mesh, added revo versions * Delete x-carriage.stl * Update README.md |
||
|---|---|---|
| .. | ||
| CAD | ||
| Images | ||
| STL | ||
| README.md | ||
README.md
LGX Lite Toolhead Setup For Voron V0.1
AN ALTERNATIVE TO THE VORON ORIGINAL SETUP
The Mini After-LGX-Lite
Designed by Olof Ogland, based on a draft design by Nemgrea.
This project also includes:
- Mounts for several hotends;
- AdaFruit and Generic ADXL345 accelerometer mounts – for Klipper’s input shaping tuning;
- Z-axis Bed Adjustable Y offset set – to allow the print bed to move back and forth from -1 up to +3.5 mm.
- Klicky – a z-probe mount that attaches with magnets
License and Credits
License: https://github.com/VoronDesign/Voron-0/blob/Voron0.1/LICENSE
Original source: https://github.com/VoronDesign/Voron-0
Credits: Nemgrea, DaveR, JosAr
Source for Klicky integration: https://github.com/jlas1/Klicky-Probe
Mini After-LGX-lite
Most screws required to perform the installation should be already on your kit. You may need some additional sizes and types. The following list identifies them:
- 2x M3x6 BHCS for belts
- 2x M3x30 BHCS for LGX Lite
- 4x M2.5×6 low profile for Copperhead
- 2x M3x10 BHCS LGX Lite to cowling
Cowling Universal
Hotend Mount MOSQUITO 3007 Fan
Hotend Mount MOSQUITO 3010 Fan
Hotend Mount COPPERHEAD Screw Mount 3007 Fan
Hotend Mount COPPERHEAD Screw Mount 3010 Fan
Hotend Mount DRAGON 3007 Fan
Hotend Mount DRAGONFLY 3007 Fan
Hotend Mount DRAGONFLY 3010 Fan
X-Carriage
Tools
PTFE Cutting Jig
