VoronUsers/printer_mods/README.md

# Mods

Printer mods for Voron 3D printers
Remember to update this README when uploading new mod!

## Table structure

Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use `:heavy_check_mark:` for :heavy_check_mark:,`:x:` for :x: and `:grey_question:` for :grey_question:

like so:
`
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |`

## Updating the compatibility matrix

If your mod is lacking a column in the compatibility matrix, feel free to submit a PR to get it updated!

---

| Creator | Mod title | Description | V1.6 | V2.1 | V2.2 |
|---------|--------------|-------------|------|------|------|
| 3D_Black   | [Fan Covers](./3D_Black) | Different fan covers for 40mm fans | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
|Andreq | [Mobius Shaft Jig](./andreq/voron2)|Tool used for grinding flats on a shaft at specific places |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
|Armstr0ng |[Led extrusions mount](./Armstr0ng) | A mount for aluminium LED extrusions with hidden fasteners  | :grey_question:|:heavy_check_mark: | :heavy_check_mark:|
| ArmyAg08|[Logitech C270 Mounts](./ArmyAg08/Logitech_C270_Mounts) |Different C270 camera mounts, attached to the extrusions |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
| | [Corner Panel Clip](./ArmyAg08/Panels)|Corner panel clip that fit 3mm or 1/8" panels with foam tape | :x:|:heavy_check_mark: | :heavy_check_mark:|
|Danowar |[Dual Mobius Mount](./Danowar/Dual_Mobuis_Mount) | Mounts two Mobius Extruders to the back of the printer| :heavy_check_mark:| :heavy_check_mark:|:heavy_check_mark: |
| |[F6 Board Mount](./Danowar/F6_Board_Mount) | Mounts for FYSETCS F6 controller boards|:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:|
| |[Humidity Sensor Bracket](./Danowar/Humidity_Sensor_Bracket) |Mount for Humidity/Temperature sensor |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:|
| | [Load Cell Spool Holder](./Danowar/Load_Cell_Spool_Holder)| Spool holder with built in weight scale|:x: |:heavy_check_mark: |:heavy_check_mark: |
| | [TL 2-to-1 Mosquito Toolhead Adapter](./Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter)| Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
| | [Tablet mount](./Danowar/Tablet_Mount)|Detachable mount for tablet using magnets |:heavy_check_mark:  |:heavy_check_mark:  | :heavy_check_mark: |
| daveidmx| [30mm Fan Adapter](./daveidmx/VORON2)|30mm Fan Adapter | :grey_question:| :grey_question:|:grey_question: |
|Dunar |[Panel Rest](./Dunar/Panel_Rest) | External panel holder | :heavy_check_mark: |:heavy_check_mark:  |:heavy_check_mark:  |
|etherwalker |[Pi Zero Camera Mount](./etherwalker/Pi_Zero_Camera_Mount) | Pi Zero Camera Mount| :grey_question:| :grey_question:|:grey_question: |
|exquyre |[Anet 12864 Display](./exquyre/Anet_12864_display) | Case for Anet 12864 LCD display|:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
| |[LED Bar Mount](./exquyre/LED_bar_mount) |Mount for 12V LED bars to the top extrusions |:grey_question: | :heavy_check_mark:|:heavy_check_mark: |
| |[Cable Cover Insert](./exquyre/cable_cover) |Room for 3-4 20AWG wires | :grey_question:| :grey_question:|:grey_question: |
| |[Einsy + RAMPS Combo](./exquyre/einsy+ramps) |Mounting bracket for 1 Einsy and 1 RAMPs |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
|FHeilmann |[Voron 2.1 5mm Parts](./FHeilmann/VORON2.1_5mm_parts) |Parts modified for extrusions with 5mm gap. |:x: |:heavy_check_mark: | :x:|
| Fulg| [PanelDue5 LCD Mount](./Fulg/VORON2/PanelDue5)|Mount for the PanelDue5 LCD display |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
|GSL12 |[WAGO 221 Mounts](./GSL12/wago_221_mount)   | Wago 221 mounts for the electronics bay |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:|
|Glowtape | [MKS GenL 1.0 Mounting Bracket](./Glowtape)| MKS GenL 1.0 Mounting Bracket|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:|
|GustavTheMighty | [4.3 PanelDue Case](./GustavtheMighty/4.3-Paneldue_Case)|Case/mount for the 4.3 PanelDue LCD Display  |:heavy_check_mark:  | :heavy_check_mark: |:heavy_check_mark:  |
| Hackdoggo| [BMGobius](./hackdoggo/v2/bmgobius)|Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
|hiemmer | [Tool Holders](./hiemmer/Tool_Holders)| Tool holder for calipers, screwdriver etc| :grey_question:| :grey_question:|:grey_question: |
|Jass_on |[Tempered glass clips/handle](./Jass_on/Voron_2.1.1_Tempered_Glass) |Panel clips and handles for using tempered glass side panels | :x: | :heavy_check_mark: | :grey_question:|
| | [Rear panel clips](./Jass_on) | Rear Panel Clips| :x: | :heavy_check_mark: | :grey_question:|
| | [SKR 1.3 Cooling bracket](./Jass_on)|SKR 1.3 mount with built in 40mm fan mount |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
|JeJeff |[2020 Extrusion slot cover](./JeJeff/VORON2.1/2020_5mm_Slot_Cover) |Slot covers for extrusions with 5mm slot width |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
| |[Cable Tie Mount](./JeJeff/VORON2.1/Cable_Tie_Mount) |Cable tie mounts for 4mm cable ties |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
| |[Main Plug Panel](./JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount) |Main Plug Panel modified to hold a RJ45 ethernet socket |:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
|Jink |[Coroplast mount](./Jink/VORON_2.1/Coroplast_Mount) |Mount / Bracket supporting the coroplast sheets | :x: | :heavy_check_mark: | :grey_question: |
| | [Filament runout sensor mount](./Jink/VORON_2.1/Filament_Runout_Sensor_Mount)|Filament runout sensor mount |:x:  | :heavy_check_mark: | :grey_question: |
| |[Left handed RAMPS mount](./Jink/VORON_2.1/Left_Handed_Ramps_Mount) | Mirrored RAMPS bracket|:heavy_check_mark:  | :heavy_check_mark: | :heavy_check_mark: |
| | [Spool holder with scale](./Jink/VORON_2.1/Spool_Holder_With_Scale)|Spool holder with scale | :x: | :heavy_check_mark: | :grey_question: |
| |[WAGO Mount](./Jink/VORON_2.1/WAGO_Mount) |Mount for 3x WAGO connectors |:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:|
| JustinVoelker|[Mains Plug Panel with RJ45](./JustinVoelker/VORON2) | Mains plug panel with ethernet cutout|:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
| K1JWG|[PanelDue 7i Custom Logo](./K1JWG/PanelDue7iLogo) |Custom Voron 2 logo for use as a PanelDue 7i startup splash screen |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
|Koios |[Front Panel Locks](./Koios/6mm_Glass) |Front panel locks for 6mm tempered glass panels | :x: | :heavy_check_mark: | :grey_question:|
| |[Logitech C920 Mount](./Koios) |Mount for C920 secured to the top front extrusion |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
| |[LED Mounts](./Koios) |Different mounts for LED light bars |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
|nemgrea |[Magnetic Split Front Door](./nemgrea/magnetic_split_front_door) |Hinges, handles and magnet mounts for creating a split front door panel |:x: |:heavy_check_mark: |:grey_question: |
|OrkusMG | [Waveshare 5 Inch LCD Cover](./OrkusMG/Waveshare5inchHDMILCDscreenCover)|Display Cover for the Waveshare 5 inch HDMI LCD screen |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:|
|pnokel |[Cable Zipper](./pnokel) |Small mount to secure wires with zip ties |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
| |[Coroplast holders](./pnokel) | Different coroplast holders for added support |:x:| :heavy_check_mark:|:grey_question: |
| |[Toothed Idler](./pnokel) |14.5mm toothed idler | :x: | :x: |:x:|
| Railgunner|[Dual Direct Drive X Carriage](./Railgunner/10mmBMGx2) |Dual direct drive using 2x Bondtech BMG | :grey_question:|:grey_question: |:grey_question: |
| Seamen|[RAMPS Extender Holder](./Seamen/RAMPS-Extender_holder) |Mount for RAMPS board with the stepper extender |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
|Sparreau | [5V Power Supply Mount](./Sparreau)|5V Power Supply Mount |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
| |[FSR Circuit Mount](./Sparreau) |Bracket for mounting the FSR PCB. |:x: |:heavy_check_mark: |:x: |
| | [Z Rail Stop](./Sparreau)|Z Rail Stop | :x: |:heavy_check_mark:| :heavy_check_mark:|
| | [Bed Extrusion Spacer](./Sparreau)|Bed Extrusion Spacer |:x: |:heavy_check_mark:| :heavy_check_mark:|
| |[Dial Indicator Fan Mount](./Sparreau) | Dial Indicator Fan Mount| :grey_question:| :grey_question:|:grey_question: |
| |[Mains Plug Panel Parametric](./Sparreau) |Scalable mains plug panel with small modifications |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|
| |[Z Idler Frame Extra Tab](./Sparreau) |An extra tab added to the Z idler to prevent sagging / rotation | :x:|:heavy_check_mark: |:x: |
|Stephan |[M12 Probeholder](./Stephan/M12_probeholder) | Drop in replacement of the stock probe to a M12|:grey_question: |:heavy_check_mark: | :grey_question:|
| |[BlTouch Mount](./Stephan/bltouch_mount) | Drop in replacement of the stock probe to a BLTouch|:grey_question: |:heavy_check_mark: | :grey_question:|
|steve450 |[Corner Brackets](./steve450/Voron2.1) | Corner brackets preventing rotation of the extrusions, and stiffening the joints.  Also covers the Z-belt hole for improved aesthetics| :grey_question:| :heavy_check_mark:|:grey_question: |
| synfinatic|[Duet Fan Mount](./synfinatic/Duet-Fan-Mount) |Duet/Duex fan mount with air vents directly above the steppers to increase airflow |:heavy_check_mark: | :heavy_check_mark:|:heavy_check_mark: |
| |[E-Stop Switch](./synfinatic/E-Stop-Switch) |Mount for emergency button attached to the top of the printer |:x: | :heavy_check_mark:|:grey_question: |
| | [Filament DryBox](./synfinatic/Filament-DryBox)|Mount for filament drybox attached to the side of the printer |:x: | :heavy_check_mark:|:grey_question: |
| |[LED Mount](./synfinatic/LED-Mount) |Mount for LED lightbars |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |
| | [PS Extra Bracket](./synfinatic/PS-Extra-Bracket)|Extra bracket to keep the power supply in place |:grey_question: |:grey_question: |:grey_question: |
| |[RJ45 Mount](./synfinatic/RJ45-Mount) |Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient |:grey_question: |:grey_question: |:grey_question: |
|warriorofwire | [Openbuilds Drag Chain](./warriorofwire/openbuilds_drag_chain)|Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck |:x: | :heavy_check_mark: | :x: |
| | [Direct Drive BMG-m mount](./warriorofwire/bmg_direct_drive)| Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo|:grey_question: |:heavy_check_mark:|:grey_question: |
| wile.e.coyote| [Coroplast Support](./wile.e.coyote)|Support for the coroplast to prevent sagging | :x: |:heavy_check_mark: |:grey_question: |
| |[Dual Buck Bracket](./wile.e.coyote)   |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
| |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: |
| | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |

---